Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC74LVXT4052D by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at a supply voltage range of 2.5V to 6V and offers a max on-state resistance of 37 ohm. With a small outline package style, it is suitable for military-grade applications requiring fast switching times.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Bristol Electronics
AZTECH Wire
$11.560
Kulean Microsystems
Authorized Procurement Solutions
SupplyDigital Components
TANS Electronics
Problanco Electronics
UHIMA Technologies
Corphita
Corohmni
Microchip USA
Plastic material makes the package lightweight and durable, ensuring the safety of the internal components.
Surface mount capability makes it easy to integrate into circuit boards, saving space and simplifying the manufacturing process.
Operates at a standard voltage level, ensuring compatibility with various systems.
Provides enough connectivity options for multiple channels and functionality.
Can withstand high temperatures, making it suitable for use in industrial and harsh environments.
CMOS technology offers low power consumption and high noise immunity, enhancing the overall performance of the product.
Multiplexers & Switches MC74LVXT4052D attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
MC74LVXT4052D Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 03/Jan/2008
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Philips Components
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
Continental Device India
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
ADG1636BRUZ
Analog Devices
ADG1636BRUZ by Analog Devices is a CMOS SPST switch with 2 functions, 16 terminals, and 1.2 ohm max on-state resistance. It operates at -40 to 125 °C and is ideal for automotive applications requiring separate output switching with a nominal voltage of 5 V.
ADG621BRMZ
ADG621BRMZ by Analog Devices is a 2-function multiplexer with a small outline, thin profile package. It operates at a temperature range of -40 to 85°C and has a max on-state resistance of 5.5 ohm. This IC is commonly used in industrial applications requiring CMOS technology and separate output switching.
FSA5157P6X
FSA5157P6X by Onsemi is a SPDT switch with 1.65-4.3V supply, 0.8 ohm Ron, and 75dB isolation. Ideal for industrial applications, it offers fast switching times of 65ns on and 40ns off in a compact package with dual terminals and separate outputs.
DG442DY
Harris Semiconductor
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4852D,118
NXP Semiconductors
NXP Semiconductors' 74HC4852D,118 is a CMOS differential multiplexer with 4 channels. It operates at a supply voltage range of 2-6V and has an on-state resistance of 330 ohm. With a compact design and automotive temperature grade, it's ideal for applications requiring fast switching speeds in harsh environments.
DG412DY+
Maxim Integrated
ADG507AKPZ
ADG507AKPZ by Analog Devices is a CMOS differential multiplexer with 8 channels and a max on-state resistance of 450 ohm. It operates at an industrial temperature grade range from -40 to 85 °C, suitable for various switching applications requiring high isolation and low signal current. The chip carrier package style with matte tin finish and quad terminal position makes it ideal for surface mount designs in industrial settings.
74LVC1G3157GW
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1414BRUZ
ADG1414BRUZ by Analog Devices is an 8-function SPST multiplexer with a max on-state resistance of 25 ohm. Operating at -40 to 125 °C, it has a switching time of 320 ns and offers 70 dB isolation. Ideal for automotive applications, this CMOS technology-based switch supports supply voltages from +-5 to +-15 V in a small outline package.
TS5A3166DCKRE4
TS5A3166DCKRE4 by Texas Instruments is a SPST switch with 1.8/5V power supplies, 3.4 ohm max resistance, and 19ns switch-on time. Ideal for industrial applications requiring a compact design, it offers separate output and -0.5 to 7V input voltage range in a small outline package.
FSA221L10X
Fairchild Semiconductor
DPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4067D,652
NXP Semiconductors' 74HC4067D,652 is a CMOS multiplexer with 16 channels and a max supply voltage of 10V. It features a small outline package style, dual terminal position, and nickel/palladium/gold finish. Ideal for automotive applications, it offers fast switching times of 450ns on-state and 435ns off-state resistance.
HEF4051BT
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4052BM96G3
CD4052BM96G3 by Texas Instruments is a CMOS differential multiplexer with 2 channels, 16 terminals, and 5V nominal voltage. It has a max operating temperature of 125°C and is suitable for military-grade applications requiring small outline packages and separate outputs.
ADG736BRMZ
ADG736BRMZ by Analog Devices is a CMOS SPDT switch with 2 functions, operating at a supply voltage of 1.8-5.5V. With a max on-state resistance of 12 ohm and switching time of 20 ns, it is ideal for automotive applications requiring fast and efficient signal routing in compact spaces.
FSUSB31K8X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG419DY+
Analog Devices' DG419DY+ is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm and switching voltage of +-15V. Ideal for industrial applications, it operates b/w -40 to 85°C, has a peak reflow temp of 260°C, and offers break-before-make switching.
77052012A
Renesas Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
CD74HC4051E
Intersil
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DG442DY+
Analog Devices' DG442DY+ is a CMOS SPST switch with 4 functions, 16 terminals, and -20V to +20V supply voltage range. With 85 ohm max on-state resistance and 60dB off-state isolation, it's ideal for industrial applications requiring fast switching times of 250ns on and 120ns off.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC74HC4066ADG
MC74HC4066ADG by Onsemi is a CMOS SPST switch with 4 functions, 120 ohm Ron, and 45 ns switch-on time. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring fast switching and low on-state resistance in compact designs.
MC74HC4852ADTR2G
MC74HC4852ADTR2G by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at -55 to 125 °C, with Vsup ranging from 2-6V. With a max on-state resistance of 1300 ohm and switching type as break-before-make, it's ideal for military-grade applications requiring precise signal routing.
MC74HC4052ADWR2G
MC74HC4052ADWR2G by Onsemi is a CMOS multiplexer with 4 channels, 170 ohm Ron, and 83 ns switch-on time. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for signal routing in high-performance electronic systems.
MC74HC4051AN
Motorola
MC74HC4051AN by Onsemi is a CMOS multiplexer with 8 channels. It operates at a nominal voltage of 4.5V and has a max on-state resistance of 170 ohm. This multiplexer is commonly used in applications requiring signal switching and isolation.
MC74HC4052ADG
DIFFERENTIAL MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4051ADTR2G
MC74HC4051ADTR2G by Onsemi is a single-ended multiplexer with 8 channels. It operates at a nominal voltage of 4.5V and has a max on-state resistance of 170 ohm. This IC is commonly used in applications requiring signal switching and multiplexing.
MC74HC4053ADTR2G
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4066ADR2G
SPST; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4051ADR2G
MC74HC4051ADR2G by Onsemi is a CMOS multiplexer with 8 channels. It operates at -55 to 125 °C and has a max on-state resistance of 170 ohm. With a package size of 9.9mm x 3.9mm, it's ideal for military-grade applications requiring precise signal switching in compact spaces.
MC74HC4053ADR2G
MC74HC4053ADR2G by Onsemi is a CMOS multiplexer with 3 functions, 16 terminals, and 80 ohm on-state resistance. It operates b/w -55 to 125 °C and has a peak reflow temp of 260 C. Ideal for military-grade applications requiring signal switching with low power consumption.
MC74HC4053ADWR2G
MC74HC4053ADWR2G by Onsemi is a CMOS multiplexer with 3 functions, 16 terminals, and 80 ohm on-state resistance. It operates b/w -55 to 125 °C and is ideal for military-grade applications requiring small outline packages and low power consumption.
MC74VHC1G66DTT1G
SPST; Temperature Grade: MILITARY; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4052DWR2
MC74HC4052DWR2 by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125°C, with a max on-state resistance of 170 ohm and switching type as break-before-make. This small outline IC is ideal for military-grade applications requiring fast switching times and low signal current consumption.
MC74HC4053ADG
MC74HC4052ADR2G
MC74HC4052ADR2G by Onsemi is a CMOS dual-terminal multiplexer with 4 channels. It operates b/w -55 to 125 °C, with a max supply voltage of 6V and on-state resistance of 170 ohm. Ideal for military-grade applications requiring small outline packages and low power consumption.
MC74VHC4051DTR2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved