Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC33269ST-5.0 by Onsemi is a 3-terminal fixed voltage regulator with a nominal output of 5V and max output current of 0.8A. It operates in temperatures ranging from -40 to 125 °C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Kulean Microsystems
SupplyDigital Components
TANS Electronics
Problanco Electronics
UHIMA Technologies
Corphita
Corohmni
The use of plastic/epoxy material makes the regulator lightweight and durable, perfect for various applications.
Being surface mountable allows for easy and convenient installation on PCBs.
With high maximum operating temperature, this regulator can withstand demanding conditions without overheating.
The bipolar technology used in this regulator ensures stable and reliable performance.
The tight voltage tolerance ensures accurate output voltage regulation for precise control.
The fixed nominal output voltage of 5V provides a standard voltage level suitable for many electronic devices.
Having 3 terminals simplifies the connection process and makes the regulator easy to integrate into circuits.
The fixed adjustability eliminates the need for manual adjustments, offering consistent output voltage.
The low maximum line regulation ensures stable performance even with fluctuations in input voltage.
The tin/lead terminal finish provides good solderability and ensures reliable connections.
The excellent load regulation ensures the output voltage remains consistent under varying load conditions.
With a maximum output current of 0.8A, this regulator can power a variety of electronic components efficiently.
The low nominal dropout voltage of 1.35V minimizes power loss and maximizes efficiency.
The high maximum input voltage rating of 20V allows for versatile use in different power supply setups.
Other Function Regulators MC33269ST-5.0 attributes and parameters. Explore more Other Function Regulators devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
JESD-609 Code:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Nominal Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Qualification Status:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Maximum Voltage Tolerance:
MC33269ST-5.0 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138BKW,115
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Hitachi
ABS06-32.768KHZ-T
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Microsemi
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
UA78M15CKC1
Texas Instruments
UA78M15CKC1 by Texas Instruments is a fixed voltage regulator with an output of 15V and max current of 0.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. With a compact package body material made of plastic/epoxy, this bipolar technology-based regulator offers precise line and load regulation for reliable performance.
UA79M15CKD
UA79M15CKD by Texas Instruments is a -15V fixed voltage regulator with 3 terminals and 0-125°C operating temperature range. It offers a max load regulation of 0.24% and can handle up to 0.5A output current, making it ideal for applications requiring precise voltage regulation in various electronic devices.
UA723CNP3
UA723CNP3 by Texas Instruments is an adjustable bipolar regulator with a min output voltage of 2V and max output voltage of 37V. It has 14 terminals in a rectangular package style suitable for various applications requiring precise voltage regulation. With operating temperatures ranging from 0°C to 70°C, it is ideal for electronic devices needing stable power supply.
TPS71025DBVR
TPS71025DBVR by Texas Instruments is a BICMOS technology regulator with 2.5V output voltage, 0.2A max current, and 2% voltage tolerance. It is a surface-mount device suitable for applications requiring precise power regulation in a compact form factor at temperatures ranging from -40 to 125°C.
UA7806CKC3
UA7806CKC3 by Texas Instruments is a fixed voltage regulator with an output of 6V and max load regulation of 0.12%. Operating temperature ranges from 0 to 125°C, making it suitable for various applications in electronics requiring stable power supply. With a package body material of PLASTIC/EPOXY, it has three terminals and a terminal pitch of 2.54mm.
UA78M22CKDP1
UA78M22CKDP1 by Texas Instruments is a fixed 22V bipolar regulator with 3 terminals and plastic/epoxy package. It operates b/w 0-125°C, making it suitable for various applications requiring stable voltage output in electronic circuits. With a terminal pitch of 2.54mm, it is commonly used in power supply designs for industrial and consumer electronics.
LM2936QM-5.0/NOPB
National Semiconductor
Other Regulators; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
UA79M08CKD3
UA79M08CKD3 by Texas Instruments is a -8V fixed voltage regulator with 0-125°C operating temperature range. It features 5% voltage tolerance, 0.5A output current, and 35V max input voltage. Ideal for applications requiring stable power supply in various electronic devices.
UA78M20MJG/883B
UA78M20MJG/883B by Texas Instruments is a ceramic packaged regulator with 20V output voltage, -55 to 125°C operating temperature range, and 5% voltage tolerance. Ideal for military applications due to MIL-STD-883 Class B screening level.
SN209003DBVT
SN209003DBVT by Texas Instruments is a CMOS regulator with 3.3V output voltage, 0.15A output current, and -40 to 125°C operating temperature range. It is ideal for applications requiring precise voltage regulation in compact spaces due to its small outline thin profile package and surface mount capability.
LM104J
LM104J by Texas Instruments is a bipolar technology regulator with 14 terminals in a ceramic rectangular package. It has an adjustable output voltage range from -0.015V to -40V, making it suitable for various applications requiring precise voltage regulation in temperatures ranging from -55°C to 125°C.
7812
Forward International Electronics
Other Regulators;
UA78M22MJG/883B
UA78M22MJG/883B by Texas Instruments is a ceramic package regulator with an operating temperature range of -55 to 150°C. It offers a fixed output voltage of 22V and features MIL-STD-883 Class B screening. Ideal for applications requiring stable power supply in harsh environments.
UA79M12CKCP1
UA79M12CKCP1 by Texas Instruments is a -12V fixed voltage regulator with 0-125°C operating temperature range. It features 3 terminals, 0.5A output current, and 35V max input voltage. Ideal for applications requiring precise voltage regulation in electronic circuits.
LM105H/883C
General Electric Solid State
Other Regulators; No. of Terminals: 8; Terminal Form: WIRE; Package Equivalence Code: CAN8,.2; Technology: BIPOLAR; Screening Level: MIL-STD-883 Class C;
TPS51200QDRCRQ1
TPS51200QDRCRQ1 by Texas Instruments is a DDR termination regulator with a max output current of 3A and min operating temperature of -40°C. It comes in a small outline package style with very thin profile, suitable for automotive applications due to AEC-Q100 screening level.
UA7812ACKC
UA7812ACKC by Texas Instruments is a fixed 12V voltage regulator with 3 terminals. It operates b/w 0-125°C, offering a max load regulation of 0.1%. This bipolar technology device in PLASTIC/EPOXY package is ideal for applications requiring stable power supply at a voltage tolerance of 4%.
MC79M05BDT1
Motorola
MC79M05BDT1 by Motorola is a -5V fixed voltage regulator with 0.5A output current and 1.1V dropout voltage. Operating from -40 to 125 °C, it has a max input voltage of 35V, making it ideal for applications requiring stable power supply in various temperature conditions.
LM217T
Samsung
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Nominal Dropout Voltage-1: 3 V; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Tin/Lead (Sn/Pb);
SM74501MP-5.0/NOPB
SM74501MP-5.0/NOPB by Texas Instruments is a 5V fixed voltage regulator with 3% voltage tolerance, ideal for applications requiring stable power supply. With a max output current of 0.05A and operating temperature range from -40 to 125°C, it is suitable for various electronic devices. This surface-mount device features bipolar technology and offers precise load regulation of 0.03%.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC33269DT3.3
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %; Surface Mount: YES; Nominal Dropout Voltage-1: 1.1 V;
MC33264D-4.0R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 13 V; Maximum Voltage Tolerance: 3 %;
MC33275MN-3.3R2
Other Regulators; No. of Terminals: 8; Package Code: SON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 13 V; Maximum Voltage Tolerance: 2 %;
MC33264DM-3.8R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 13 V; Maximum Voltage Tolerance: 3 %;
MC33269ST-12
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %; Technology: BIPOLAR; Maximum Load Regulation: .06 %;
MC33264DM-3.0R2
MC33275ST-2.5
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 13 V; Maximum Voltage Tolerance: 2 %; Maximum Output Current-1: .25 A; Terminal Finish: Tin/Lead (Sn/Pb);
MC33264D-3.0R2
MC33264D-4.75R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 13 V; Maximum Voltage Tolerance: 4 %;
MC33264DM-4.0R2
MC33264DM-4.75R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 13 V; Maximum Voltage Tolerance: 4 %;
MC33269ST
Other Regulators; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; JESD-609 Code: e0; Maximum Output Voltage-1: 15 V;
MC33264DM-2.8R2
MC33264D-3.8R2
MC33264DM-3.3R2
MC33264D-2.8R2
MC33264D-3.3R2
MC33264D-5.0R2
MC33264DM-5.0R2
MC33269ST5.0
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %; Operating Temperature (TJ-Max): 125 Cel; Nominal Dropout Voltage-1: 1.35 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved