Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV5749NV by Onsemi is a switching regulator with 16 terminals, operating temperature range of -40 to 85 °C. It features current-mode control, pulse width modulation, and buck switcher configuration. Ideal for industrial applications requiring a nominal input voltage of 12V and compact design with small outline package style.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Problanco Electronics
Corphita
UHIMA Technologies
Corohmni
Plastic/Epoxy material provides durability and protection for the internal components of the switching regulator, ensuring long-term reliability.
Surface mount capability allows for easy and convenient installation on PCBs, saving space and reducing assembly time.
Rectangular shape provides a compact form factor, ideal for applications where space is limited.
Current-mode control allows for stable and efficient operation of the switching regulator, improving overall performance.
BICMOS technology combines the advantages of both bipolar and CMOS technologies, offering high speed and low power consumption.
BUCK configuration is commonly used for step-down voltage regulation, making this switching regulator suitable for a wide range of applications.
Switching Regulators & Controllers LV5749NV attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LV5749NV Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS3303C
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
USB2514BI-AEZG
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TPS62130ARGTT
TPS62130ARGTT by Texas Instruments is a 16-terminal switching regulator with a 12V nominal input voltage and 3A max output current. It operates in industrial temperature grades from -40 to 85°C, using pulse width modulation control for buck switcher configuration. Ideal for applications requiring efficient power conversion in compact spaces.
LM2675M-12/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
UCC28089DR
UCC28089DR by Texas Instruments is a switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in industrial temperature grade range from -40 to 105°C, making it suitable for various power management applications. The IC features pulse width modulation control technique and push-pull switcher configuration for efficient power conversion.
LT1054IS8#TRPBF
Linear Technology
SWITCHED CAPACITOR REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS84250RKGR
TPS84250RKGR by Texas Instruments is a voltage-mode switching regulator with a max output current of 2.5A and a max input voltage of 50V. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for various applications requiring efficient power conversion in compact spaces. With a package style of chip carrier and heat sink/slug, this regulator is ideal for use in electronic devices where space-saving and high performance are essential.
L7987LTR
STMicroelectronics
L7987LTR by STMicroelectronics is a voltage-mode switching regulator with 16 terminals, operating at a max frequency of 1650 kHz. With a max output current of 3.45 A and input voltage range from 4.5 V to 61 V, it is ideal for applications requiring efficient power conversion in compact spaces.
LMZM23601SILR
LMZM23601SILR by Texas Instruments is a switching regulator with 1A output current, 1100kHz max switching frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its buck-boost configuration, it supports input voltages from 4V to 36V and offers precise current-mode control.
UCC28180DR
UCC28180DR by Texas Instruments is a current-mode power factor controller with a max operating temperature of 125°C. It features a switching frequency of 250 kHz and is suitable for boost switcher configurations in automotive applications. The package style is small outline, making it ideal for surface mount designs with 8 terminals.
LT8640SIV#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HQCCN; Package Shape: SQUARE; Surface Mount: YES;
LT8614IUDC#TRPBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 18; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS63020DSJT
TPS63020DSJT by Texas Instruments is a switching regulator with 14 terminals, operating temperature range of -40 to 85°C, and output current up to 4.5A. Ideal for industrial applications requiring a compact design, it supports input voltages from 1.8V to 5.5V and offers pulse width modulation control for efficient power management at frequencies up to 2600kHz.
TPS54160DGQ
TPS54160DGQ by Texas Instruments is a switching regulator with a max output current of 1.5A and max output voltage of 58V, suitable for automotive applications. It operates b/w -40 to 150°C, with a control mode of current-mode PWM and a max switching frequency of 2500kHz. The package style is small outline, heat sink/slub, thin profile, shrink pitch.
TPS60400DBVT
TPS60400DBVT by Texas Instruments is a small outline, low profile switched capacitor converter with a max output current of 0.06A and a max switching frequency of 350kHz. It operates in industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring a nominal input voltage of 5V and a min output voltage of -5V.
LMR16030SDDAR
LMR16030SDDAR by Texas Instruments is a switching regulator with max output current of 3A, operating temp range -40 to 125°C, and input voltage range from 4.3V to 60V. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and high switching frequency of 2500kHz.
TPS54060DGQ
TPS54060DGQ by Texas Instruments is a switching regulator with a max output current of 0.5A and max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with a PWM technique, offering a wide temperature range from -40 to 150°C. The compact square package style makes it ideal for space-constrained designs.
TPS54302DDCT
TPS54302DDCT by Texas Instruments is a switching regulator with 3A output current, 400kHz max frequency, and 125°C operating temp. Ideal for automotive applications due to its buck switcher config, PWM control technique, and wide input voltage range of 4.5V to 28V.
LM2671M-5.0/NOPB
LM2671M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates b/w -40 to 125°C, has a buck switcher configuration, and supports pulse width modulation control technique up to 400kHz frequency.
LM2596S-5.0
LM2596S-5.0 by Texas Instruments is a 5-terminal switching regulator with max output voltage of 37V and current of 3A. Ideal for automotive applications, it operates b/w -40 to 125°C, with input voltage range from 4.5V to 40V.
TPS56339DDCR
TPS56339DDCR by Texas Instruments is a switching regulator with 3A output current, 500kHz max switching frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and buck switcher configuration.
LT8650SIV#PBF
Analog Devices
LT8650SIV#PBF by Analog Devices is a 32-terminal switching regulator with a max input voltage of 42V and operating temperature range from -40 to 125°C. It features a control mode of current-mode, pulse width modulation technique, and phase-shift switcher configuration. Ideal for automotive applications due to its compact chip carrier package style and high switching frequency of 3000 kHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV5768V-A-TLM-E
Onsemi
LV5768V-A-TLM-E by Onsemi is a 16-terminal switching regulator with a max input voltage of 42V. Operating b/w -40 to 85 °C, it uses current-mode control and pulse width modulation technique at a max frequency of 500 kHz. Ideal for industrial applications requiring efficient buck switcher configuration in compact spaces.
LV57331TT
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LV5762LF-MPB-H
Switching Regulator or Controllers; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
LV5747QA
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LV5761V-TLM-E
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5744V-TLM-E
LV5762LF-TLM-H
Switching Regulator or Controllers; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Moisture Sensitivity Level (MSL): 3;
LV5725JA
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV57331TT-TLM-H
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5747TT
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5761V
LV5744V
LV5762LF
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
LV5725JA-ZH
LV5749NV-TLM-E
LV5747NTT
LV5710V
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5725JA-AH
LV5743V
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5749NV
Sanyo Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved