Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD4218V by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55°C to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high voltage protection.
Median Price
$1.815
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.750
100+ parts
$1.550
1k+ parts
$1.160
10k+ parts
$1.120
DigiKey
-
$0.880
Flip Electronics (Authorized)
Nova Conductors
$2.743
Digiode
$5.548
Chip Stock
Flip Electronics
Vyrian
Cyclops Electronics Ltd
Aztec Data Supply Inc.
$0.213
Semicontronic
$1.870
$1.823
$1.814
Ampacity Inc.
Corohmni
$2.688
Continental Prestige Electronics
Argo Parts USA
Netroflash
Corphita
$5.256
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
TANS Electronics
SupplyDigital Components
Supply Digital
Kulean Microsystems
UHIMA Technologies
GreenTree Electronics
Low maximum on state voltage ensures efficient operation and helps in reducing power consumption.
Single configuration makes installation and setup of the optocoupler trigger device outputs simple and straightforward.
High peak surge current capability allows the device to withstand sudden spikes in current, ensuring reliability in various applications.
Low maximum forward current helps in controlling the flow of current in the circuit, enhancing safety and preventing overheating.
Triac output optocoupler offers efficient switching capabilities and is suitable for controlling AC power loads.
High maximum operating temperature allows the device to function reliably in harsh environmental conditions.
Low minimum operating temperature ensures the device can operate in a wide range of temperature conditions.
Matte tin terminal finish provides good conductivity and prevents corrosion, ensuring long-term reliability.
Low maximum input trigger current ensures the device can be easily triggered with minimal input power.
High repetitive off-state voltage capability ensures the device can withstand voltage spikes and surges, increasing durability.
Tube packing method provides convenient storage and transportation of the optocoupler trigger device outputs.
Nominal input trigger current helps in efficient triggering and control of the device with standard input signals.
Low maximum reverse leakage current ensures minimal loss of current in the off state, increasing efficiency.
High minimum peak off-state voltage ensures reliable insulation and prevents current leakage in off state.
High maximum isolation voltage provides enhanced safety by isolating input and output circuits effectively.
Through hole mounting feature offers easy and secure installation of the optocoupler trigger device outputs on circuit boards.
Moderate maximum on state current capability allows the device to handle a range of loads efficiently.
Optocoupler Trigger Device Outputs FOD4218V attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Minimum Peak Off-state Voltage:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
Sub-Category:
Terminal Finish:
FOD4218V Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semitron
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
Shandong Yiguang Electronic Joint Stock
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Daco Semiconductor
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MOC3021SVM
Fairchild Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A; Minimum Peak Off-state Voltage: 400 V;
BRT12H-X001
Vishay Semiconductors
TRIGGER OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: 2 mA; Configuration: SINGLE;
FODM3083R2V
FODM3083R2V by Onsemi is a single TRIAC output optocoupler with a max forward current of 0.06A and isolation voltage of 3750V. It operates b/w -40 to 100 °C, suitable for triggering devices in various applications like industrial control systems and power supplies.
MOC3010SR2M
MOC3010SR2M by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high electrical isolation.
BRT13H
Siemens
TRIGGER OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On State Current: .3 A; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 5300 V; Configuration: SINGLE;
FODM3083V
The Onsemi FODM3083V is a single TRIAC output optocoupler with max forward current of 0.06A and isolation voltage of 3750V. It operates b/w -40 to 100 °C, suitable for triggering devices in various applications like motor controls and solid-state relays.
MOC3021VM
The Onsemi MOC3021VM is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
IL4108
Vishay Intertechnology
The Vishay Intertechnology IL4108 is a single optocoupler trigger device with a max forward current of 0.06A and a min peak off-state voltage of 800V. It operates b/w -55°C to 100°C, providing an isolation voltage of 5300V. Ideal for applications requiring TRIAC output optocouplers with zero cross over sensitivity.
TIL3012
TIL3012 by Texas Instruments is a single TRIAC output optocoupler with max. forward current of 0.05A and isolation voltage of 3535V. It operates b/w -40°C to 100°C, with nominal trigger current of 5mA. Ideal for applications requiring high isolation and control of AC loads up to 250V at 0.1A.
FOD4116
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum On State Current: .07 A; No. of Elements: 1; Maximum Operating Temperature: 100 Cel;
IL4108-X007T
Vishay Intertechnology IL4108-X007T is a single optocoupler with 0.06A forward current, 2mA trigger current, and 800V peak off-state voltage. Ideal for triggering devices in applications requiring high isolation voltage up to 5300V, such as industrial control systems and power supplies.
MOC3163M
The Onsemi MOC3163M is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Operating from -40 to 85°C, it offers 600V repetitive off-state voltage and 4170V isolation. Ideal for triggering devices in various applications requiring through-hole mounting.
FOD4108SD
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 800 V; JESD-609 Code: e3;
MOC3021SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Minimum Peak Off-state Voltage: 400 V; Maximum Operating Temperature: 85 Cel;
FOD4216TV
FOD4216TV by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55°C to 100°C, suitable for applications requiring high isolation voltage up to 5000V. Ideal for triggering devices in various electronic circuits with its through-hole mounting feature.
IL4118-X017T
Vishay Intertechnology's IL4118-X017T is a TRIAC output optocoupler with 3A peak surge current and 3V max on-state voltage. Operating b/w -55°C to 100°C, it offers 5300V isolation voltage for applications requiring surface mounting feature.
The Onsemi FOD4116 is a single optocoupler with 3V max on-state voltage and 3A peak surge current. Ideal for triggering devices, it operates b/w -55°C to 100°C, offers 600V repetitive off-state voltage, and has a max isolation voltage of 5000V.
FOD410SV
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: .65 mA; Maximum On State Current: .07 A; Maximum Operating Temperature: 100 Cel; Configuration: SINGLE;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Repetitive Off-state Voltage (Peak): 400 V; Additional Features: UL RECOGNIZED, VDE APPROVED;
IL4218-X019
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD4208SDV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: .75 mA; Maximum Forward Current: .03 A; No. of Elements: 1; Configuration: SINGLE;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Input Trigger Current: .002 A; JESD-609 Code: e3; Repetitive Off-state Voltage (Peak): 800 V;
FOD4208SD
FOD4208SD by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It is commonly used in applications requiring optocoupler trigger device outputs, such as in industrial control systems or power management circuits.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 800 V; Nominal Input Trigger Current: .75 mA; JESD-609 Code: e3; Additional Features: UL RECOGNIZED;
FOD4208SV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; Minimum Peak Off-state Voltage: 800 V;
FOD4208SV by Onsemi is a TRIAC OUTPUT OPTOCOUPLER with 3V Max On State Voltage, 3A Peak Surge Current, and -55 to 100°C Operating Temperature. It is ideal for applications requiring optocoupler trigger device outputs in various electronic circuits.
FOD4108SDV
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Operating Temperature: 100 Cel;
FOD4108SDV by Onsemi is a single TRIAC output optocoupler with 3A peak surge current and 800V repetitive off-state voltage. It operates b/w -55 to 100 °C, ideal for applications requiring high isolation voltage of 5000V in surface mount configurations.
FOD4208
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .03 A; Additional Features: UL RECOGNIZED; Configuration: SINGLE;
The Onsemi FOD4208 is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, with an isolation voltage of 5000V. Ideal for applications requiring optocoupler trigger device outputs in through-hole mounting configurations.
FOD420
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Maximum Reverse Leakage Current: .00001 A; Maximum On State Current: .3 A; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5000 V;
FOD4208S
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .03 A; Minimum Peak Off-state Voltage: 800 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; No. of Elements: 1; Maximum On State Voltage: 3 V;
FOD4208TV
FOD4208TV by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55°C to 100°C, ideal for triggering devices in various applications. With an isolation voltage of 5000V, it offers reliable performance in through-hole mounting setups.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .03 A; JESD-609 Code: e3; Nominal Input Trigger Current: .75 mA; Additional Features: UL RECOGNIZED, VDE APPROVED;
FOD420SDV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3; Minimum Peak Off-state Voltage: 600 V;
FOD420SDV by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high voltage protection.
FOD420S
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Forward Current: .03 A;
FOD420S by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, ideal for applications requiring high isolation voltage up to 5000V, such as trigger device outputs in various electronic circuits.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved