Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD4218TV by Onsemi is a TRIAC output optocoupler with max on-state voltage of 3V, peak surge current of 3A, and max forward current of 0.03A. Ideal for applications requiring optocoupler trigger device outputs in temperatures ranging from -55°C to 100°C.
Median Price
$4.950
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$2.931
1k+ parts
$2.498
10k+ parts
$2.408
Mouser Electronics
$2.940
$2.460
$2.290
Verical
-
$2.429
Nova Conductors
$2.475
Digiode
$3.772
Vyrian
Flip Electronics
ACDS - Activité Composants Distribution Service
Bristol Electronics
$1.563
$1.373
Dan-Mar Components
Aztec Data Supply Inc.
$0.431
Corohmni
$2.425
Argo Parts USA
Continental Prestige Electronics
Semicontronic
$3.370
$3.286
$3.269
Ampacity Inc.
Corphita
$3.573
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
Authorized Procurement Solutions
TANS Electronics
Glotronic Ltd.
SupplyDigital Components
Kulean Microsystems
Supply Digital
Perfect Parts
UHIMA Technologies
With a low maximum on state voltage of 3V, this product can effectively control devices with low voltage requirements without risk of damage.
The single configuration simplifies the setup and integration of this optocoupler trigger device outputs into various systems, reducing complexity and saving time.
The high peak surge current of 3A ensures that this product can handle sudden spikes in current, providing reliable protection for connected components.
With a low maximum forward current, this optocoupler trigger device outputs can efficiently control devices without drawing excessive current, leading to energy savings.
Being a TRIAC output optocoupler, this product is suitable for AC power control applications, providing versatility and compatibility with a wide range of systems.
The high maximum operating temperature of 100°C allows this product to function reliably in challenging thermal environments, increasing its durability and performance.
With a low minimum operating temperature of -55°C, this optocoupler trigger device outputs can be used in cold environments without any loss in functionality, making it suitable for various applications.
The matte tin terminal finish provides good conductivity and corrosion resistance, ensuring a long-lasting and reliable connection in different operating conditions.
The low maximum input trigger current requirement of 0.0013A ensures that this product can be easily triggered by a variety of input signals, enhancing its compatibility and usability.
The high repetitive off-state voltage rating of 800V ensures that this optocoupler trigger device outputs can withstand voltage spikes and transients, offering robust protection for connected devices.
The tube packaging method provides convenience for storage, transportation, and handling of this product, reducing the risk of damage during transit and ensuring product integrity.
With a standard nominal input trigger current requirement of 0.75mA, this optocoupler trigger device outputs can be easily triggered by most control systems, allowing for seamless integration and operation.
The low maximum reverse leakage current of 0.00001A ensures minimal power loss and efficient operation of this product, contributing to energy savings and improved performance.
The high minimum peak off-state voltage rating of 800V provides excellent insulation and protection against voltage surges, ensuring the safety of connected devices and systems.
The high maximum isolation voltage of 5000V offers reliable electrical insulation between input and output circuits, preventing potential damage from voltage spikes and enhancing overall system safety.
The through-hole mounting feature simplifies the installation and mounting of this optocoupler trigger device outputs onto PCBs or other surfaces, providing mechanical stability and ease of assembly.
With a maximum on state current rating of 0.3A, this product can effectively control devices with moderate current requirements, making it versatile for a wide range of applications.
Optocoupler Trigger Device Outputs FOD4218TV attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Minimum Peak Off-state Voltage:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
Sub-Category:
Terminal Finish:
FOD4218TV Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Weitronic Enterprise
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
IL4117-X007
Vishay Semiconductors
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum On State Current: .3 A; Maximum Forward Current: .06 A; JESD-609 Code: e3;
MOC3041SM
MOC3041SM by Onsemi is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, has 400V repetitive off-state voltage, and offers 7500V isolation. Ideal for triggering devices in applications requiring high isolation levels and precise control.
MOC3053SM
The Onsemi MOC3053SM is a single TRIAC output optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 4170V, and is ideal for triggering devices in applications requiring high voltage protection.
MOC3021S-TA1
Lite-on Technology
MOC3021S-TA1 by Lite-on Technology is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40°C to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high electrical isolation.
EL3063S(TA)-V
Everlight Electronics
EL3063S(TA)-V by Everlight Electronics is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Operating from -55 to 100 °C, it offers 600V repetitive off-state voltage for applications requiring high isolation voltage in surface mount configurations.
FOD4208
Fairchild Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .03 A; Additional Features: UL RECOGNIZED; Configuration: SINGLE;
ASO242R
Crydom
The Crydom ASO242R is a SINGLE SCR OUTPUT OPTOCOUPLER with 2500V isolation voltage. Operating temperature ranges from -30°C to 80°C, making it suitable for various trigger device output applications. Its Tin (Sn) finish with Nickel (Ni) barrier ensures reliable performance in demanding environments.
IL410
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5300 V; Minimum Operating Temperature: -55 Cel; Nominal Input Trigger Current: 2 mA; Maximum On State Current: .3 A;
FODM3053R2-NF098
FODM3053R2-NF098 by Onsemi is a single configuration optocoupler trigger device output with a max on-state voltage of 3V. It has a max forward current of 0.06A and can operate in temperatures ranging from -40°C to 100°C. This optocoupler is commonly used for applications requiring high isolation voltage and control of AC power circuits.
BRT13H-X017T
TRIGGER OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; Nominal Input Trigger Current: 2 mA; Maximum On State Current: .3 A; Maximum Isolation Voltage: 5300 V; Minimum Peak Off-state Voltage: 800 V;
4N39.3S
Fairchild Semiconductor's 4N39.3S is a SCR output optocoupler with a max forward current of 0.06A and isolation voltage of 5300V. It operates b/w -55°C to 100°C, with a min peak off-state voltage of 200V. Ideal for optocoupler trigger device outputs in various applications requiring high isolation and low input trigger current.
IL4108-X009
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; JESD-609 Code: e3;
MOC3063S
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel;
TLP161J(U,C,F)
Toshiba
Toshiba's TLP161J(U,C,F) is a single optocoupler with peak surge current of 1.2A, ideal for triggering devices. With a max forward current of 0.05A and triac output, it operates b/w -40 to 100°C. Its isolation voltage reaches 2500V, making it suitable for applications requiring high voltage protection.
IL420-X009
TRIAC OUTPUT OPTOCOUPLER; Configuration: SINGLE; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5300 V;
FOD4118
FOD4118 by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55°C to 100°C, has an isolation voltage of 5000V, and is ideal for applications requiring optocoupler trigger device outputs.
MOC3023S-TA
MOC3023S-TA by Lite-on Technology is a single TRIAC output optocoupler with a max forward current of 0.05 A and min peak off-state voltage of 400 V. It operates b/w -40°C to 100°C, providing isolation up to 5000 V. Ideal for applications requiring high-voltage switching control in industrial settings.
ASO242
The Crydom ASO242 is a SINGLE SCR OUTPUT OPTOCOUPLER with 2500V isolation voltage. It operates b/w -30°C to 80°C, making it suitable for various trigger device output applications. Terminal finish is Tin (Sn) with Nickel (Ni) barrier for enhanced durability and performance.
MOC3023S-TA1
MOC3023S-TA1 by Lite-on Technology is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high electrical isolation.
MOC3032SMT&R
Isocom Components
MOC3032SMT&R by Isocom Components is a single TRIAC output optocoupler with 3V max on-state voltage and 0.05A max forward current. It operates b/w -40 to 100°C, has a peak off-state voltage of 250V, and offers 5300V isolation voltage. Ideal for triggering devices in applications requiring high electrical isolation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD4208SDV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: .75 mA; Maximum Forward Current: .03 A; No. of Elements: 1; Configuration: SINGLE;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Input Trigger Current: .002 A; JESD-609 Code: e3; Repetitive Off-state Voltage (Peak): 800 V;
FOD4208SD
FOD4208SD by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It is commonly used in applications requiring optocoupler trigger device outputs, such as in industrial control systems or power management circuits.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 800 V; Nominal Input Trigger Current: .75 mA; JESD-609 Code: e3; Additional Features: UL RECOGNIZED;
FOD4208SV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; Minimum Peak Off-state Voltage: 800 V;
FOD4208SV by Onsemi is a TRIAC OUTPUT OPTOCOUPLER with 3V Max On State Voltage, 3A Peak Surge Current, and -55 to 100°C Operating Temperature. It is ideal for applications requiring optocoupler trigger device outputs in various electronic circuits.
FOD4108SDV
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Operating Temperature: 100 Cel;
FOD4108SDV by Onsemi is a single TRIAC output optocoupler with 3A peak surge current and 800V repetitive off-state voltage. It operates b/w -55 to 100 °C, ideal for applications requiring high isolation voltage of 5000V in surface mount configurations.
The Onsemi FOD4208 is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, with an isolation voltage of 5000V. Ideal for applications requiring optocoupler trigger device outputs in through-hole mounting configurations.
FOD420
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Maximum Reverse Leakage Current: .00001 A; Maximum On State Current: .3 A; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5000 V;
FOD4208S
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .03 A; Minimum Peak Off-state Voltage: 800 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; No. of Elements: 1; Maximum On State Voltage: 3 V;
FOD4208TV
FOD4208TV by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55°C to 100°C, ideal for triggering devices in various applications. With an isolation voltage of 5000V, it offers reliable performance in through-hole mounting setups.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .03 A; JESD-609 Code: e3; Nominal Input Trigger Current: .75 mA; Additional Features: UL RECOGNIZED, VDE APPROVED;
FOD420SDV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3; Minimum Peak Off-state Voltage: 600 V;
FOD420SDV by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high voltage protection.
FOD420S
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Forward Current: .03 A;
FOD420S by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, ideal for applications requiring high isolation voltage up to 5000V, such as trigger device outputs in various electronic circuits.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved