Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MOC3081 by Fairchild Semiconductor is a single optocoupler trigger device output with a max forward current of 0.06 A. It is commonly used in applications requiring a triac output optocoupler with zero CRSVR, such as in temperature control systems or motor drives.
Median Price
$0.458
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Ozdisan Elektronik
$0.313
American Microsemiconductor Inc.
$16.810
Vyrian
Digiode
Rebound Electronics
ComSIT Distribution GmbH
Resion
Nova Conductors
ACDS - Activité Composants Distribution Service
Prism Electronics
Holdelec - ElecDif-Pro
LittleDiode
Fibra_Brandt Electronic GMBH
Cyclops Electronics Ltd
ECAB
Ampacity Inc.
$0.305
Aztec Data Supply Inc.
$0.669
Authorized Procurement Solutions
Perfect Parts
A-Z Elektronik GmbH
Lixinc
Continental Prestige Electronics
Supply Digital
Argo Parts USA
Assy Fe
Cyclops Electronics Ltd (Excess)
Corphita
Kepictronics
Bastille Electronics
The single configuration of this optocoupler trigger device output allows for simple and straightforward installation, making it a convenient choice for various applications.
With a maximum forward current of 0.06 A, this optocoupler trigger device output can handle high current loads reliably and efficiently, making it suitable for demanding scenarios.
This optocoupler trigger device output features a TRIAC output optocoupler with zero cross voltage switching (CRSVR), providing precise control and allowing for seamless integration into electrical circuits.
With a maximum operating temperature of 85°C, this optocoupler trigger device output can operate reliably even in environments with elevated temperatures, ensuring its longevity and performance.
The optocoupler trigger device output is capable of operating at minimum temperatures as low as -40°C, making it suitable for use in cold environments without compromising functionality.
The tin/lead terminal finish of this optocoupler trigger device output facilitates easy soldering and ensures stable connections, enhancing its overall reliability and durability.
With a single element, this optocoupler trigger device output simplifies circuit design and provides a compact solution, making it an efficient choice for space-constrained applications.
The nominal input trigger current of 15 mA ensures efficient activation of the optocoupler trigger device output, allowing for precise control and reliable performance in various triggering circuits.
With a minimum peak off-state voltage of 800 V, this optocoupler trigger device output provides reliable isolation and protection against voltage spikes, making it ideal for high-voltage applications.
The high maximum isolation voltage of 7500 V ensures effective isolation between input and output, offering enhanced safety and protection against electrical disturbances, making it a reliable choice for sensitive applications.
Optocoupler Trigger Device Outputs MOC3081 attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Fairchild Semiconductor
Additional Features:
Configuration:
Maximum Forward Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
Terminal Finish:
MOC3081 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
NSN
5980-01-326-8638, 5980013268638
NIIN
013268638
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Comchip Technology
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
American Power Devices
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Vishay Telefunken
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
MOC3032SMT&R
Isocom Components
MOC3032SMT&R by Isocom Components is a single TRIAC output optocoupler with 3V max on-state voltage and 0.05A max forward current. It operates b/w -40 to 100°C, has a peak off-state voltage of 250V, and offers 5300V isolation voltage. Ideal for triggering devices in applications requiring high electrical isolation.
MOC3063S-TA1-V
Lite-on Technology
MOC3063S-TA1-V by Lite-on Technology is a single optocoupler with 3V on-state voltage, 1A peak surge current, and 600V repetitive off-state voltage. Ideal for triggering devices in applications requiring high isolation voltage of 5000V, such as industrial control systems and power supplies.
TLP525G(F)
Toshiba
Toshiba's TLP525G(F) is a TRIAC OUTPUT OPTOCOUPLER with 3V On State Voltage, 1.2A Surge Current, and 2500V Isolation Voltage. Ideal for applications requiring optocoupler trigger device outputs in temperatures ranging from -40°C to 100°C.
IL4108
Siemens
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Nominal Input Trigger Current: 2 mA; Maximum Isolation Voltage: 5300 V; Minimum Peak Off-state Voltage: 800 V; No. of Elements: 1; Configuration: SINGLE;
IL4218-X001
Vishay Intertechnology
IL4218-X001 by Vishay Intertechnology is a single optocoupler with a max forward current of 0.06A and an isolation voltage of 5300V. It operates b/w -55°C to 100°C, making it suitable for applications requiring high on-state current up to 0.3A, such as triggering devices in optoelectronic circuits.
MOC3063
Qt Optoelectronics
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Leakage Current: .0000005 A; Maximum On State Current: .1 A; JESD-609 Code: e0;
BRT12H-X001
Vishay Semiconductors
TRIGGER OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: 2 mA; Configuration: SINGLE;
TLP3052A(F(O
Toshiba's TLP3052A(F(O) optocoupler has a max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high electrical isolation and protection against voltage surges.
FODM3083V
The Onsemi FODM3083V is a single TRIAC output optocoupler with max forward current of 0.06A and isolation voltage of 3750V. It operates b/w -40 to 100 °C, suitable for triggering devices in various applications like motor controls and solid-state relays.
BRT13H
The Vishay Intertechnology BRT13H is a TRIAC output optocoupler with a max on-state voltage of 2.3V and peak surge current of 3A. It operates b/w -40°C to 100°C, has an isolation voltage of 5300V, and is ideal for triggering devices in various applications requiring through-hole mounting.
FOD4218SV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; Minimum Peak Off-state Voltage: 800 V; Additional Features: UL RECOGNIZED, VDE APPROVED; JESD-609 Code: e3;
FOD4118SDV
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 800 V; JESD-609 Code: e3; Additional Features: UL RECOGNIZED, VDE APPROVED; Nominal Input Trigger Current: .65 mA;
TLP548J(F)
Toshiba TLP548J(F) is an SCR output optocoupler with 1.45V max on-state voltage, 2A peak surge current, and 85°C max operating temp. Ideal for applications requiring high isolation voltage (2500V), such as industrial control systems and power supplies.
MOC3022SR2VM
MOC3022SR2VM by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
VOT8025AB-VT2
Vishay Intertechnology's VOT8025AB-VT2 is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 5300V, such as triggering devices in industrial control systems. Operating temperature ranges from -40 to 110°C, making it suitable for various environments.
MOC3023VM
The Onsemi MOC3023VM is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high voltage protection.
MOC3052SMT&R
MOC3052SMT&R by Isocom Components is a single TRIAC output optocoupler with a max forward current of 0.05A and isolation voltage of 5300V. It operates b/w -40°C to 100°C, ideal for triggering devices in various applications requiring high voltage protection and signal isolation.
MOC3023S
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Pure Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum On State Voltage: 3 V; Minimum Peak Off-state Voltage: 400 V;
MOC3021S
Fairchild Semiconductor's MOC3021S is a TRIAC output optocoupler with a max forward current of 0.06 A and isolation voltage of 7500 V. It operates b/w -40 to 85 °C, with a nominal input trigger current of 15 mA. Ideal for triggering devices in applications requiring high voltage isolation.
TLP3022
Toshiba's TLP3022 is a TRIAC output optocoupler with 0.025A max forward current, 5mA trigger current, and 5000V isolation voltage. Ideal for applications requiring high voltage protection and signal isolation in temperatures ranging from -25 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MOC3063SM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: 5 mA; Maximum Operating Temperature: 85 Cel; Peak Surge Current: 1 A;
The Onsemi MOC3063SM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, has a repetitive off-state voltage of 600V, and offers isolation up to 4170V. Ideal for triggering devices in applications requiring high-voltage protection and signal isolation.
MOC3063S-TA1
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Forward Current: .05 A; Maximum Isolation Voltage: 5000 V; No. of Elements: 1;
MOC3052SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Configuration: SINGLE; Maximum Input Trigger Current: .01 A;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Nominal Input Trigger Current: 10 mA; No. of Elements: 1; Maximum Forward Current: .05 A; JESD-609 Code: e3;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
MOC3043M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 7500 V; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .1 A;
The Onsemi MOC3043M is a single optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for triggering devices, it operates b/w -40 to 85°C, offers 7500V isolation voltage, and has a max input trigger current of 0.005A.
MOC3023SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Peak Surge Current: 1 A; Minimum Peak Off-state Voltage: 400 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; JESD-609 Code: e3; Configuration: SINGLE; Maximum On State Voltage: 3 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 400 V; Maximum Forward Current: .06 A; Minimum Operating Temperature: -40 Cel;
MOC3021SM
Harris Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Leakage Current: .0000001 A; Repetitive Off-state Voltage (Peak): 400 V; Maximum Input Trigger Current: .015 A;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Repetitive Off-state Voltage (Peak): 400 V; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Minimum Peak Off-state Voltage: 400 V; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Peak Surge Current: 1 A; Maximum Operating Temperature: 100 Cel; Maximum Reverse Leakage Current: .0001 A;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Input Trigger Current: .015 A; Peak Surge Current: 1 A; Configuration: SINGLE;
MOC3063SR2VM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Peak Surge Current: 1 A; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Peak Off-state Voltage: 600 V;
MOC3083SR2M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Voltage: 3 V; No. of Elements: 1; Maximum Reverse Leakage Current: .0001 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved