Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Toshiba's TLP3062A(LF1,F is a single optocoupler with peak surge current of 1.2A and max forward current of 0.025A. Ideal for triggering devices, it features a triac output with zero cross voltage, operating b/w -25 to 85°C. With a max isolation voltage of 5000V, it suits applications requiring high input trigger currents up to 0.01A.
Median Price
$1.550
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.829
1k+ parts
$0.670
10k+ parts
$0.578
Nova Conductors
$1.040
-
Vyrian
Aztec Data Supply Inc.
$0.530
Corohmni
$0.604
Argo Parts USA
Continental Prestige Electronics
$1.019
Ampacity Inc.
$1.320
Semicontronic
$1.287
$1.280
Netroflash
$0.988
$0.967
Single configuration simplifies installation and reduces complexity.
High peak surge current allows for reliable operation under surge conditions.
Efficient operation with low forward current consumption.
Triac output optocoupler with zero cross-over ensures precise control and switching.
Wide operating temperature range suitable for various environments.
Can operate reliably in low temperature conditions.
Low trigger current required for activation.
High off-state voltage capability for voltage isolation and protection.
Negligible reverse leakage current ensures minimal power wastage.
High off-state voltage for reliable performance and safety.
High isolation voltage for safety and protection against voltage surges.
Surface mount design for easy and secure installation.
Capable of handling high on-state current for efficient operation.
Optocoupler Trigger Device Outputs TLP3062A(LF1,F attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Toshiba
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
TLP3062A(LF1,F Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
TOSHIBA, is a Japanese multinational conglomerate corporation headquartered in Minato, Tokyo, Japan. Its diversified products and services include power, industrial and social infrastructure systems, elevators and escalators, electronic components, semiconductors, hard disk drives (HDD), printers, batteries, lighting, as well as IT solutions such as quantum cryptography which has been in development at Cambridge Research Laboratory, Toshiba Europe, located in the United Kingdom, now being commercialised.It was one of the biggest manufacturers of personal computers, consumer electronics, home appliances, and medical equipment. As a semiconductor company and the inventor of flash memory, Toshiba had been one of the top 10 in the chip industry until its flash memory unit was spun off as Toshiba Memory, later Kioxia, in the late 2010s.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
IL4218-X006
Siemens
TRIAC OUTPUT OPTOCOUPLER; Nominal Input Trigger Current: .7 mA; Maximum Isolation Voltage: 5300 V; Maximum On State Current: .3 A; Maximum Forward Current: .06 A; Maximum Operating Temperature: 100 Cel;
IS606
Isocom Components
IS606 by Isocom Components is a single SCR output optocoupler with a max forward current of 0.06 A and isolation voltage of 5300 V. It operates b/w -55°C to 100°C, ideal for triggering devices in high-voltage applications requiring a nominal input trigger current of 14 mA.
IL4118-X007T
Vishay Intertechnology
Vishay Intertechnology IL4118-X007T is a single optocoupler with 0.06A forward current, 800V peak off-state voltage, and 5300V isolation voltage. Ideal for triggering devices in applications requiring high reliability and electrical isolation at temperatures ranging from -55°C to 100°C.
IL420-X001
Vishay Semiconductors
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: 1 mA; Maximum Operating Temperature: 100 Cel; Minimum Peak Off-state Voltage: 600 V; Maximum On State Current: .3 A;
IL4118-X009
Infineon Technologies
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Additional Features: HIGH SENSITIVITY, UL APPROVED; Maximum Forward Current: .06 A; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V; Nominal Input Trigger Current: .7 mA;
MOC3041VM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Additional Features: VDE APPROVED; Maximum On State Current: .1 A;
MOC3032
The Fairchild Semiconductor MOC3032 is a single optocoupler trigger device with a max forward current of 0.06A and triac output. It operates b/w -40°C to 85°C, with an isolation voltage of 5300V. Ideal for applications requiring a nominal input trigger current of 10mA and min peak off-state voltage of 250V.
MOC3020TVM
The Onsemi MOC3020TVM is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
MOC3041M
MOC3041M by Onsemi is a single optocoupler trigger device output with a max on-state voltage of 3V. It has a peak surge current of 1A and a max forward current of 0.06A. This component is commonly used in applications requiring triac output optocouplers with zero cross-over sensitivity.
FODM3022R2
FODM3022R2 by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 to 100 °C, has an isolation voltage of 3750V, and can handle a max on-state current of 0.07A. Ideal for applications requiring optocoupler trigger device outputs in various electronic circuits.
MOC3020M
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 85 Cel; Maximum Input Trigger Current: .03 A;
MOC3053SR2VM
MOC3053SR2VM by Onsemi is a single optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85 °C, has an isolation voltage of 4170V, and is ideal for triggering devices in applications requiring high-voltage protection.
MOC3082TVM
The Onsemi MOC3082TVM is a single TRIAC output optocoupler with 3V max on-state voltage, 1A peak surge current, and 85°C max operating temp. Ideal for triggering devices in applications requiring high isolation voltage of 7500V, such as industrial control systems and power supplies.
Lite-on Technology
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin (Sn); Maximum Forward Current: .05 A; Nominal Input Trigger Current: 15 mA; Minimum Operating Temperature: -40 Cel;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 5300 V; Minimum Peak Off-state Voltage: 800 V; Maximum Operating Temperature: 100 Cel;
BRT22H-X007
TRIGGER OUTPUT OPTOCOUPLER; Maximum Forward Current: .02 A; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; No. of Elements: 1;
TLP266J
Toshiba
Toshiba TLP266J is a single optocoupler with peak surge current of 1.2A and max forward current of 0.025A. Ideal for triggering devices, it features a triac output with zero cross voltage, operating b/w -25°C to 85°C. With a max isolation voltage of 3750V, it's suitable for surface mount applications requiring high on-state current at 0.07A.
MOC3020
Qt Optoelectronics
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On State Current: .1 A; Maximum Operating Temperature: 100 Cel; Minimum Peak Off-state Voltage: 400 V; Minimum Operating Temperature: -40 Cel;
BRT22H
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Maximum On State Current: .3 A; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
PC3SD21NTZCF
Sharp Corporation
Sharp Corporation's PC3SD21NTZCF is a single optocoupler with triac output, featuring 0.05A max forward current and 600V min peak off-state voltage. With 5000V isolation voltage, it operates b/w -30°C to 100°C, ideal for triggering devices in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLP3063(S,C,F)
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum On State Voltage: 3 V; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Maximum Input Trigger Current: .005 A;
TLP3062(S)
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -25 Cel; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 85 Cel;
TLP3083(TP1,F
Toshiba's TLP3083(TP1,F is a single TRIAC output optocoupler with 3V max on-state voltage and 1.2A peak surge current. Ideal for triggering devices, it offers 800V repetitive off-state voltage and 5000V isolation voltage, making it suitable for applications requiring high reliability in temperatures ranging from -25 to 85°C.
TLP3062A(F(O
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Peak Surge Current: 1.2 A; No. of Elements: 1; Packing Method: MAGAZINE; Maximum Reverse Leakage Current: .00001 A;
TLP3062A(F
Toshiba's TLP3062A(F) is a single optocoupler with peak surge current of 1.2A and max forward current of 0.025A. Ideal for triggering devices, it features a triac output with zero cross voltage and offers high isolation voltage of 5000V. Operating temp ranges from -25 to 85°C, making it suitable for various applications requiring reliable signal transmission.
TLP3062AF(TP4,F(O
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Packing Method: TR; Configuration: SINGLE; Additional Features: UL APPROVED; Maximum On State Voltage: 3 V;
TLP3062(S,C,F)
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Nominal Input Trigger Current: 5 mA; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 5000 V; Maximum Reverse Leakage Current: .00001 A;
TLP3052A(F(O
Toshiba's TLP3052A(F(O) optocoupler has a max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high electrical isolation and protection against voltage surges.
TLP3083(TP1,F(O
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Input Trigger Current: .005 A; Packing Method: TR; Maximum Isolation Voltage: 5000 V;
TLP3052A(TP1,F
Toshiba's TLP3052A(TP1,F is a single TRIAC output optocoupler with peak surge current of 1.2A, max forward current of 0.025A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high voltage protection and surface mounting feature.
TLP3052AF(D4,F(O
Toshiba's TLP3052AF(D4,F(O optocoupler has a max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high voltage protection and signal isolation.
TLP3052AF(D4TP4F(O
Toshiba's TLP3052AF(D4TP4F(O is a single TRIAC output optocoupler with max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high isolation levels and surface mounting feature. Operating temp range -25 to 85°C makes it versatile for various environments.
TLP3052AF(F(O
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .1 A; No. of Elements: 1; Minimum Operating Temperature: -25 Cel;
TLP3062A(D4TP1,F(O
Toshiba's TLP3062A(D4TP1,F(O) is a single configuration optocoupler trigger device with a max on-state voltage of 3V. It has a peak surge current of 1.2A and can operate at temperatures ranging from -25 to 85 °C. This device is commonly used in applications requiring high isolation voltage and zero-crossing triac output.
TLP3052A(D4,F(O
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Additional Features: UL APPROVED, VDE APPROVED; Maximum On State Current: .1 A; Maximum Operating Temperature: 85 Cel; Maximum Reverse Leakage Current: .00001 A;
TLP3052A(D4TP1,F(O
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum On State Voltage: 3 V; Maximum Forward Current: .025 A; Packing Method: TR;
TLP3052A(D4TP5,F(O
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; No. of Elements: 1; Minimum Peak Off-state Voltage: 600 V; Additional Features: UL APPROVED, VDE APPROVED;
TLP3052A(TP5,F(O
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Peak Off-state Voltage: 600 V; Maximum Isolation Voltage: 5000 V; Additional Features: UL APPROVED; Configuration: SINGLE;
TLP3083F(D4,TP4F
Toshiba's TLP3083F(D4,TP4F) is a single TRIAC output optocoupler with zero cross voltage suitable for optocoupler trigger device outputs. It features a max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for applications requiring precise triggering and high isolation levels in temperatures ranging from -25°C to 85°C.
TLP3083F(TP4,F
TLP3083F(TP4,F by Toshiba is a single optocoupler trigger device with a max on-state voltage of 3V and peak surge current of 1.2A. It is commonly used in applications requiring TRIAC output optocouplers with zero CRSVR, such as in surface mount configurations for high isolation voltage up to 5000V.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved