Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD410SD by Onsemi is a single TRIAC output optocoupler with 3A peak surge current and 600V repetitive off-state voltage. Ideal for triggering devices, it operates b/w -55 to 100°C, has a max isolation voltage of 5000V, and features surface mounting.
Median Price
$3.121
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
DigiKey
1+ parts
$4.030
100+ parts
$2.344
1k+ parts
$1.980
10k+ parts
$1.822
Newark
$4.150
$2.630
-
Element14
$2.262
$1.884
$1.861
Verical
Farnell
$1.890
$1.590
Nova Conductors
$1.966
Digiode
$3.002
Chip Stock
Vyrian
Flip Electronics
Corohmni
$0.128
Advanced Electronics
$0.353
$0.321
$0.289
Ampacity Inc.
$1.920
Argo Parts USA
Corphita
$2.844
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
A-Z Elektronik GmbH
Kulean Microsystems
Kepictronics
Alle Elektronik GmbH
Assy Fe
TANS Electronics
SupplyDigital Components
Continental Prestige Electronics
$1.670
$1.320
Supply Digital
UHIMA Technologies
Bastille Electronics
Low maximum on-state voltage ensures efficient operation and helps in reducing power consumption.
Single configuration simplifies the setup and makes the product user-friendly.
High peak surge current capability provides robust protection against electrical surges.
Low maximum forward current ensures safe operation and prevents overheating.
Triac output optocoupler with zero cross-voltage allows for precise control and reliable switching.
High maximum operating temperature ensures the product can withstand elevated temperatures without malfunctioning.
Low minimum operating temperature ensures the product can operate in extreme cold conditions.
Matte tin terminal finish provides good solderability and ensures a secure connection.
Low maximum input trigger current helps in reducing the power required for triggering the device.
High repetitive off-state voltage rating ensures reliable and durable performance over multiple switching cycles.
TR packing method facilitates easy handling and storage of the product.
Nominal input trigger current ensures consistent triggering of the device for reliable operation.
Low maximum reverse leakage current minimizes power loss and ensures efficient operation.
High minimum peak off-state voltage rating provides a safety margin against voltage spikes.
High maximum isolation voltage rating ensures safe operation and protection against electrical hazards.
Surface mounting feature allows for easy and secure installation of the product on a circuit board.
Low maximum on-state current ensures safe operation and prevents overheating of the device.
Optocoupler Trigger Device Outputs FOD410SD attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Minimum Peak Off-state Voltage:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
Sub-Category:
Terminal Finish:
FOD410SD Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Telefunken Microelectronics
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
PC4SD11NTZCF
Sharp Corporation
Sharp Corporation's PC4SD11NTZCF is a single TRIAC output optocoupler with max. forward current of 0.05A and isolation voltage of 5000V. Ideal for triggering devices, it operates b/w -30 to 100°C, with a min. peak off-state voltage of 800V and nominal input trigger current of 5mA.
BRT13H-X016
Vishay Intertechnology
Vishay Intertechnology's BRT13H-X016 is a single optocoupler trigger device with a max forward current of 0.02A and isolation voltage of 5300V. It operates b/w -40°C to 100°C, ideal for applications requiring a nominal input trigger current of 2mA, such as industrial control systems and power supplies.
MOC3162TVM
The Onsemi MOC3162TVM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85 °C, with 600V repetitive off-state voltage. Ideal for triggering devices in applications requiring high isolation voltage up to 4170V.
TLP3062AF(TP4,F(O
Toshiba's TLP3062AF optocoupler has a max on-state voltage of 3V, peak surge current of 1.2A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high-voltage protection and signal isolation. Operating temp range: -25 to 85°C, making it suitable for various environments.
IL420
Vishay Semiconductors
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
MOC3021.S
Qt Optoelectronics
TRIAC OUTPUT OPTOCOUPLER; Minimum Peak Off-state Voltage: 400 V; Additional Features: UL APPROVED; Nominal Input Trigger Current: 15 mA; Maximum Isolation Voltage: 5300 V; No. of Elements: 1;
MOC3032
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Input Trigger Current: .01 A; Maximum On State Voltage: 3 V; Maximum On State Current: .1 A;
VOT8024AB
Vishay Intertechnology's VOT8024AB is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for triggering devices, it offers 800V repetitive off-state voltage, -55 to 110°C operating temp range, and 5300V isolation voltage in a surface mount package.
MOC3033M
Fairchild Semiconductor
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: 5 mA; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 7500 V;
IL4218-X001
IL4218-X001 by Vishay Intertechnology is a single optocoupler with a max forward current of 0.06A and an isolation voltage of 5300V. It operates b/w -55°C to 100°C, making it suitable for applications requiring high on-state current up to 0.3A, such as triggering devices in optoelectronic circuits.
MOC3052VM
The Onsemi MOC3052VM is a TRIAC output optocoupler with a max on-state voltage of 2.5V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 7500V, and is ideal for triggering devices in applications requiring high electrical isolation.
FOD4216SDV
FOD4216SDV by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 °C to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high electrical isolation.
FOD4118S
FOD4118S by Onsemi is a single TRIAC output optocoupler with 3V max on-state voltage and 3A peak surge current. Ideal for triggering devices, it operates b/w -55 to 100 °C, offers 800V repetitive off-state voltage, and has a max isolation voltage of 5000V.
MOC3011
Isocom Components
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0000001 A; Maximum On State Voltage: 3 V; Repetitive Off-state Voltage (Peak): 250 V;
TLP3073(F
Toshiba's TLP3073(F is a single optocoupler with peak surge current of 1.2A, max forward current of 0.02A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high voltage protection and signal isolation.
VO4258D-X007T
VO4258D-X007T by Vishay Intertechnology is a single TRIAC output optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 5300V. Ideal for applications requiring high isolation voltage and reliable triggering in industrial electronics.
FOD4118SDV
FOD4118SDV by Onsemi is a single TRIAC output optocoupler with 3A peak surge current and 800V repetitive off-state voltage. It operates b/w -55 to 100 °C, suitable for triggering devices in high-voltage applications. With a max isolation voltage of 5000V, it is ideal for surface mount installations requiring precise control.
IL4208-X007T
Siemens
TRIAC OUTPUT OPTOCOUPLER; Maximum Isolation Voltage: 5300 V; Configuration: SINGLE; Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 800 V; No. of Elements: 1;
IL4217-X009
TRIAC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -55 Cel; Additional Features: HIGH SENSITIVITY, UL APPROVED; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A; Nominal Input Trigger Current: .7 mA;
MOC3052M
The Onsemi MOC3052M is a TRIAC output optocoupler with max. on-state voltage of 2.5V, peak surge current of 1A, and isolation voltage of 7500V. Ideal for triggering devices in applications requiring high voltage protection like industrial control systems and power supplies.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD4208SDV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: .75 mA; Maximum Forward Current: .03 A; No. of Elements: 1; Configuration: SINGLE;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Input Trigger Current: .002 A; JESD-609 Code: e3; Repetitive Off-state Voltage (Peak): 800 V;
FOD4208SD
FOD4208SD by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It is commonly used in applications requiring optocoupler trigger device outputs, such as in industrial control systems or power management circuits.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 800 V; Nominal Input Trigger Current: .75 mA; JESD-609 Code: e3; Additional Features: UL RECOGNIZED;
FOD4208SV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; Minimum Peak Off-state Voltage: 800 V;
FOD4208SV by Onsemi is a TRIAC OUTPUT OPTOCOUPLER with 3V Max On State Voltage, 3A Peak Surge Current, and -55 to 100°C Operating Temperature. It is ideal for applications requiring optocoupler trigger device outputs in various electronic circuits.
FOD4108SDV
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Operating Temperature: 100 Cel;
FOD4108SDV by Onsemi is a single TRIAC output optocoupler with 3A peak surge current and 800V repetitive off-state voltage. It operates b/w -55 to 100 °C, ideal for applications requiring high isolation voltage of 5000V in surface mount configurations.
FOD4208
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .03 A; Additional Features: UL RECOGNIZED; Configuration: SINGLE;
The Onsemi FOD4208 is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, with an isolation voltage of 5000V. Ideal for applications requiring optocoupler trigger device outputs in through-hole mounting configurations.
FOD420
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Maximum Reverse Leakage Current: .00001 A; Maximum On State Current: .3 A; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5000 V;
FOD4208S
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .03 A; Minimum Peak Off-state Voltage: 800 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; No. of Elements: 1; Maximum On State Voltage: 3 V;
FOD4208TV
FOD4208TV by Onsemi is a TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55°C to 100°C, ideal for triggering devices in various applications. With an isolation voltage of 5000V, it offers reliable performance in through-hole mounting setups.
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .03 A; JESD-609 Code: e3; Nominal Input Trigger Current: .75 mA; Additional Features: UL RECOGNIZED, VDE APPROVED;
FOD420SDV
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3; Minimum Peak Off-state Voltage: 600 V;
FOD420SDV by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high voltage protection.
FOD420S
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Peak Off-state Voltage: 600 V; Nominal Input Trigger Current: .75 mA; Maximum Forward Current: .03 A;
FOD420S by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 to 100°C, ideal for applications requiring high isolation voltage up to 5000V, such as trigger device outputs in various electronic circuits.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved