Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi FOD3120 is a single optocoupler with a max forward current of 0.025A and isolation voltage of 5000V, ideal for applications requiring high voltage protection. With a min operating temperature of -40°C and max power dissipation of 0.25W, it is suitable for through hole mounting in various electronic circuits.
Median Price
$1.162
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Newark
1+ parts
$0.362
100+ parts
1k+ parts
10k+ parts
Arrow
$0.544
$0.534
$0.530
$0.514
Chip1Stop
$2.060
$1.150
$0.987
$0.840
Element14
$2.122
$1.206
$1.147
-
Mouser Electronics
$2.300
$1.280
Farnell
$2.388
$1.171
$1.109
Flip Electronics (Authorized)
Rochester
$1.120
$0.930
$0.829
Verical
$1.036
RS (Exports)
$1.028
$0.906
$0.883
Digiode
$0.871
TME
$2.190
$1.110
Chip Stock
Vyrian
Cyclops Electronics Ltd
NAC Semi
$0.817
$0.754
Semtec, LLC
ComSIT Distribution GmbH
Flip Electronics
Prism Electronics
EMSNET
Nova Conductors
Aztec Data Supply Inc.
$0.193
Semicontronic
$0.446
$0.435
$0.433
Ampacity Inc.
Corphita
$0.825
Corohmni
$0.917
Continental Prestige Electronics
$2.170
$0.963
$0.752
RC Electronics
$0.980
$0.900
$0.870
Metaverse IC Inc.
Perfect Parts
Kepictronics
Infinite Electronics LLP (Excess)
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
Lixinc
QUARKTWIN TECHNOLOGY LTD
Glotronic Ltd.
Argo Parts USA
TANS Electronics
iodParts Technologies Inc.
$0.905
GreenTree Electronics
UHIMA Technologies
Authorized Procurement Solutions
Bastille Electronics
Supply Digital
Single configuration makes it easy to use and integrate into circuits.
Can handle a relatively high forward current, suitable for many applications.
Utilizes FET output optocoupler technology for high performance and reliability.
Can operate at high temperatures without compromising performance.
Can operate in cold environments as well, providing versatility in usage.
Matte tin finish provides good electrical conductivity and resistance to corrosion.
Can dissipate a relatively high amount of power, suitable for various applications.
Has a minimum breakdown voltage of 5V, ensuring protection against voltage spikes.
Provides high isolation voltage, enhancing safety in circuit applications.
Through hole mounting feature for easy and secure installation on PCBs.
Low forward voltage drop helps in efficient operation and power savings.
Optocoupler Transistor Outputs FOD3120 attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
FOD3120 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Protek Devices
FOD817D3SD
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
TLP293(GB,E(T
Toshiba
TLP293(GB,E(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 125 °C and has an isolation voltage of 3750 V. It is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
TLP185(GB,SE
Toshiba's TLP185(GB,SE) is a single optocoupler with max. forward current of 0.05A and min. CTR of 100%. Ideal for applications requiring high isolation voltage (3750V), low dark current (80nA), and surface mounting feature. Operating temp range: -55 to 110°C.
H11G1SR2M
DARLINGTON OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 7500 V; JESD-609 Code: e3; Maximum Forward Current: .06 A; Nominal Current Transfer Ratio: 1000 %;
PS2501L-4-A
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .08 A; Nominal Current Transfer Ratio: 300 %; Configuration: SEPARATE, 4 CHANNELS; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 5000 V;
PS2811-1-F3-A-K
Renesas Electronics
PS2811-1-F3-A-K by Renesas Electronics is a SINGLE optocoupler with max. forward current of 0.05A, min. collector-emitter breakdown voltage of 40V, and isolation voltage of 2500V. It operates b/w -55°C to 100°C, ideal for applications requiring high isolation and signal transfer in harsh environments.
LTV-817S-TA1-D
Lite-on Technology
LTV-817S-TA1-D by Lite-on Technology is a single optocoupler with max forward current of 0.05 A, operating temp range -30 to 110 °C. It features transistor output, min current transfer ratio of 300%, and max isolation voltage of 5000 V. Ideal for applications requiring high isolation and signal transmission efficiency in electronic circuits.
SFH6186-5X001T
Vishay Intertechnology
Vishay Intertechnology SFH6186-5X001T is a single optocoupler with max. forward current of 0.06A, operating temp. range -55 to 100°C, and isolation voltage of 5300V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio of 300%.
IL207AT
Vishay Intertechnology's IL207AT is a single optocoupler with a max forward current of 0.06A and operating temperature range from -55°C to 100°C. With a min CTR of 34%, it offers high isolation voltage of 3000V, making it ideal for applications requiring reliable signal transmission in harsh environments.
TCLT1003
Vishay Intertechnology's TCLT1003 is a single optocoupler with max. forward current of 0.06A, ideal for applications requiring transistor output optocouplers. With a min. operating temp of -55°C and max. isolation voltage of 5000V, it offers reliable performance in various circuits. Featuring surface mounting feature and matte tin terminal finish, it ensures easy installation and durability in demanding environments.
HMHA2801
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); No. of Elements: 1; Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 80 %; Maximum Operating Temperature: 100 Cel;
FOD817A
FOD817A by Onsemi is a single optocoupler with a max forward current of 0.05A and min CTR of 80%. It operates b/w -55°C to 110°C, has an isolation voltage of 5000V, and is ideal for applications requiring fast response times in through-hole mounting configurations.
4N25
Ct Micro International
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5000 V; Additional Features: UL APPROVED, VDE APPROVED; Maximum Operating Temperature: 110 Cel; Configuration: SINGLE;
TLP521-4GR
Isocom Components
TLP521-4GR by Isocom Components is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and min current transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 5300V, such as in industrial control systems.
LTV-817S-TA1-C
LTV-817S-TA1-C by Lite-on Technology is a single optocoupler with max. forward current of 0.05 A, operating temp. range -30 to 110°C, and min. CTR of 200%. Ideal for applications requiring high isolation voltage (5000 V), fast response time (18 µs), and surface mounting feature.
CNY17-3
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Configuration: SINGLE; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V; Minimum Operating Temperature: -55 Cel;
PS2801-1-F3-A
Nec
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Forward Current: .05 A; Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Operating Temperature: 100 Cel;
SFH6186-5T
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 300 %; Minimum Collector-emitter Breakdown Voltage: 55 V; Maximum Dark Current: 200 nA; Configuration: SINGLE;
LTV-846S
LTV-846S by Lite-on Technology is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and an isolation voltage of 5000V, making it ideal for applications requiring high electrical isolation such as industrial control systems. With a min operating temperature of -30°C and max of 100°C, it offers reliable performance in various environments.
TLP184(GB-TPL,SE(T
Toshiba's TLP184(GB-TPL,SE(T) is a single optocoupler with AC input-transistor output. It offers a max forward current of 0.05A and min transfer ratio of 100%. With a max isolation voltage of 3750V, it is ideal for applications requiring high voltage protection in temperatures ranging from -55°C to 110°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD3120SD
FET OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Power Dissipation: .25 W; JESD-609 Code: e3; Maximum Forward Current: .025 A;
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Isolation Voltage: 5000 V; JESD-609 Code: e3; Maximum Operating Temperature: 100 Cel;
FOD3180
The Onsemi FOD3180 is a single optocoupler with a max forward current of 0.016 A and an isolation voltage of 5000 V. It operates b/w -40°C to 100°C, making it suitable for applications requiring high voltage protection and signal isolation in industrial electronics.
FET OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Maximum Forward Voltage: 1.8 V; Minimum Operating Temperature: -40 Cel;
FOD3180SDV
FOD3180SDV by Onsemi is a single optocoupler with a max forward current of 0.016A and FET output type. It operates b/w -40°C to 100°C, has an isolation voltage of 5000V, and can dissipate up to 0.295W. Ideal for applications requiring high voltage isolation in surface mount configurations.
FET OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Maximum Forward Current: .016 A;
FOD3180SD
FET OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5000 V;
FOD3180SD by Onsemi is a single optocoupler with a max forward current of 0.016A and operating temperature range from -40°C to 100°C. Featuring FET output, it has an isolation voltage of 5000V, making it ideal for applications requiring high voltage protection in surface mount configurations.
FOD3120TSR2V
FET OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
FET OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 5000 V; Maximum Power Dissipation: .25 W; Maximum Forward Current: .025 A;
FOD3180TSV
FET OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Maximum Power Dissipation: .25 W; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel;
FET OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Maximum Power Dissipation: .25 W; Maximum Operating Temperature: 100 Cel;
FOD3120
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .025 A; Maximum Isolation Voltage: 5000 V;
FOD3120SDV
FOD3120SDV by Onsemi is a single optocoupler with FET output. It has a max forward current of 0.025A, isolation voltage of 5000V, and operates b/w -40 to 100°C. Ideal for applications requiring high voltage isolation in surface mount configurations.
FET OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 5 V; Maximum Isolation Voltage: 5000 V;
FOD3180S
FET OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Power Dissipation: .295 W; Configuration: SINGLE; Maximum Forward Current: .016 A;
FET OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; No. of Elements: 1; Additional Features: UL RECOGNIZED;
FOD3150
FET OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.8 V; JESD-609 Code: e3; Configuration: SINGLE;
FET OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; No. of Elements: 1; Maximum Operating Temperature: 100 Cel; Configuration: SINGLE;
FOD3180T
FET OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; Maximum Forward Voltage: 1.8 V; Maximum Isolation Voltage: 5000 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved