Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FAN73833MX by Onsemi is a half bridge peripheral driver with 15V power supplies, under voltage protection, and 20V max supply voltage. It is used in automotive applications for driving peripherals efficiently with a turn-on time of 0.27 us and turn-off time of 0.25 us.
Median Price
$0.912
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$1.031
100+ parts
$0.949
1k+ parts
$0.889
10k+ parts
-
Arrow
$1.580
$0.946
$0.737
$0.701
Mouser Electronics
$1.660
$0.985
$0.885
$0.784
Chip1Stop
$0.792
Verical
$0.788
DigiKey
Future Electronics
$0.770
RS (Exports)
$1.142
$0.752
Greenchips
$0.648
$0.618
$0.588
$0.531
Nova Conductors
$0.890
Digiode
$0.979
Chip Stock
Vyrian
Bristol Electronics
NAC Semi
$1.240
Flip Electronics
IBS Electronics
$1.198
SIE Connect GmbH - GreenChips
Elcom Components
Corohmni
$0.512
Ampacity Inc.
$0.620
Continental Prestige Electronics
$0.871
Argo Parts USA
Bastille Electronics
$0.846
$0.803
Corphita
$0.928
Advanced Electronics
Semicontronic
$1.340
$1.306
$1.300
Component Stockers USA
$1.670
$1.130
$0.950
$0.670
Microchip USA
$5.376
Aztec Data Supply Inc.
$13.141
Perfect Parts
Glotronic Ltd.
Lixinc
Futuretech Components
Problanco Electronics
Authorized Procurement Solutions
GreenTree Electronics
TANS Electronics
Kulean Microsystems
Assy Fe
SupplyDigital Components
Supply Digital
UHIMA Technologies
ChipstoGo Electronic ltd
The use of plastic/epoxy material makes this peripheral driver lightweight and durable.
The surface mount capability allows for easy and efficient installation of the peripheral driver on circuit boards.
With a high maximum supply voltage, this driver can handle a wide range of power sources, increasing its versatility.
The rectangular package shape offers a compact design, saving space on the circuit board.
The under voltage protection feature ensures the peripheral driver is safeguarded from potential damage.
The 15V power supply is a common voltage level, making this driver compatible with various systems and applications.
With 8 terminals, this peripheral driver can easily connect to multiple components for efficient operation.
The small outline package style further reduces the space required for installation, making it ideal for compact devices.
The minimum supply voltage requirement of 15V ensures the driver operates reliably within a specific voltage range.
The high maximum operating temperature allows the peripheral driver to function effectively in various environmental conditions.
Peripheral Drivers FAN73833MX attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
FAN73833MX Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL PD25233X 22/Aug/2023
PCN Design/Specification - Device Marking Update 02/Jul/2015 Logo 17/Aug/2017
PCN Assembly/Origin - Mold Compound Change 21/Jul/2021
PCN Packaging - Mult Devices 24/Oct/2017 Mult MSL1 Pkg Rev 20/Dec/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Baneasa S A
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
BTS721L1XUMA1
Infineon Technologies
BTS721L1XUMA1 by Infineon is a peripheral driver with 4 functions, MOS technology, and 20 terminals. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage scenarios. This small outline package is ideal for applications requiring a nominal voltage of 12V and a max output peak current limit of 9.8A.
TPS27081ADDCR
TPS27081ADDCR by Texas Instruments is a peripheral driver with a max supply voltage of 8V. It has built-in transient protection and operates in an industrial temperature range. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.
BTS432E2E3062A
BTS432E2E3062A by Infineon Technologies is a peripheral driver with a max supply voltage of 42V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This MOS technology-based driver has a nominal output peak current limit of 44A and is commonly used as a buffer or inverter based peripheral driver.
ULN2004A
Vishay Intertechnology's ULN2004A is a 7-bit buffer/inverter peripheral driver with open-collector output and sink current flow direction. It operates at -20 to 85°C, with a max supply voltage of 8V and max supply current of 1.45mA. Ideal for applications requiring transient protection in compact spaces due to its small form factor (19.3mm x 7.62mm x 5.08mm).
SN754410NE
SN754410NE by Texas Instruments is a 16-terminal peripheral driver with built-in transient and thermal protections. It operates b/w -40 to 85°C, supports a max output current of 1A, and has a turn-on time of 0.4us. Ideal for industrial applications requiring true output polarity control in a compact package style.
BTS4175SGAXUMA1
BTS4175SGAXUMA1 by Infineon is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 52V and has a turn-on time of 180 us. Ideal for applications requiring a small outline package style and sink output current flow direction.
BTS443P
BTS443P by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 5V to 12V and has a max output peak current limit of 7.6A. This small outline package is ideal for automotive applications requiring reliable power management solutions.
MIC5841YWM-TR
MIC5841YWM-TR by Microchip Technology is an 8-bit SIPO peripheral driver with inverted output polarity. It operates at temperatures ranging from -40 to 85°C and has a max supply current of 16mA. This small outline package with gull wing terminals is ideal for industrial applications requiring standard input characteristics and transient protection.
IRS44273LTRPBF
IRS44273LTRPBF by Infineon Technologies is a Peripheral Driver with 5 terminals, operating at -40 to 125 °C. It has built-in transient and under voltage protections, suitable for automotive applications. With a max supply voltage of 20 V and output current flow direction as sink, it offers fast turn-on/off times of 0.095 us.
HCPL-316J
Broadcom
HCPL-316J by Broadcom is a peripheral driver with a max supply voltage of 5.5V and built-in protections against over current, over voltage, under voltage, and transient. It has a small outline package style and is suitable for industrial applications requiring buffer or inverter based interface ICs with a nominal output peak current limit of 2.5A.
ISO1H815GAUMA1
ISO1H815GAUMA1 by Infineon Technologies is a 36-terminal peripheral driver with 1.2A output current and 4.4A peak current limit. It features a half-bridge interface, sink output flow direction, and operates on power supplies of 3.3/5V to 15/30V. Ideal for applications requiring precise control in compact designs.
E-L293DD013TR
STMicroelectronics
E-L293DD013TR by STMicroelectronics is a peripheral driver with 2 functions, operating at 4.5-36V. It offers thermal protection and source/sink current flow direction. Ideal for applications requiring buffer or inverter-based interface ICs in compact designs.
BTS70041EPPXUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 2A; Terminal Finish: TIN; JESD-609 Code: e3;
MIC2545A-2YM
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VNH5019A-E
VNH5019A-E by STMicroelectronics is a full bridge peripheral driver with 30 terminals. It offers built-in protections for transient, over voltage, thermal, and under voltage. With a max supply voltage of 24V and nominal output peak current limit of 50A, it is ideal for applications requiring high current control in compact spaces.
BTS3800SLHTSA1
BTS3800SLHTSA1 by Infineon Technologies is a peripheral driver with 5 terminals, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 8V to 18V and has a turn-on/off time of 5us. This small outline device is ideal for applications requiring source/sink output current flow control.
L293DD
L293DD by STMicroelectronics is a peripheral driver with 2 functions, 20 terminals, and a max supply voltage of 36V. It features built-in thermal protection and offers true output polarity. Ideal for applications requiring source and sink current flow control in compact designs.
VND5025AKTR-E
VND5025AKTR-E by STMicroelectronics is a 36V peripheral driver with 2 functions, built-in protections, and CMOS technology. It has a supply voltage range of 8-36V, suitable for buffer or inverter-based applications. The small outline package with gull wing terminals makes it ideal for compact designs requiring source current flow direction.
IRS2184SPBF
International Rectifier
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FPF2700MX
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FAN7390MX
FAN7888MX
FAN7888MX by Onsemi is a peripheral driver with 20V max supply voltage, -40 to 125 °C operating temp, and 0.22us turn-on time. Ideal for automotive applications, it offers transient and under voltage protections in a small outline package style.
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7390AMX1
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7388MX
FAN7388MX by Onsemi is a half bridge based peripheral driver with 3 functions. It operates at supply voltages b/w 10V to 15V, offering under voltage protection. With a small outline package style, it is ideal for automotive applications requiring source and sink output current flow direction.
FAN7390M1
FAN7390M1 by Fairchild Semiconductor is a half bridge based peripheral driver with built-in transient and under voltage protections. It operates b/w -40 to 125 °C, with a supply voltage range of 10-20 V. This small outline package is ideal for automotive applications requiring fast turn-on/off times and source/sink current flow.
FAN7391MX
FAN7391MX by Onsemi is a 14-terminal peripheral driver with built-in transient and under voltage protections. It operates b/w -40 to 125 °C, with a supply voltage range of 10-20 V. Ideal for automotive applications, it features a turn-on time of 0.05 us and turn-off time of 0.045 us.
FAN7385MX
FULL BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7385MX by Onsemi is a full bridge peripheral driver with 2 functions, operating at supply voltages b/w 10V to 20V. It offers built-in protections for over current and under voltage, making it ideal for automotive applications requiring high power output control in a compact small outline package. With fast turn-on/off times of 0.18 us and source/sink current flow direction, this driver ensures efficient performance in demanding environments.
FAN73901MX
FAN73901MX by Onsemi is a half bridge peripheral driver with 15V supply voltage, suitable for automotive applications. It features source and sink output current flow direction, operates b/w -40 to 125°C, and has a peak reflow temperature of 260°C. Ideal for driving power MOSFETs in various electronic systems.
FAN7390M1X
FAN7392MX
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
FAN73833MX
FAN73895MX
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
FAN73901M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved