Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FAN5362UMP33X by Onsemi is a voltage-mode switching regulator with 1.15A output current, 3.3V nominal output voltage, and 3300kHz max switching frequency. Ideal for industrial applications requiring efficient power management in a compact package with small outline and very thin profile design.
Median Price
$0.720
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$0.676
1k+ parts
$0.612
10k+ parts
-
Nova Conductors
$0.557
Digiode
$0.684
Chip Stock
Vyrian
Corohmni
$0.546
Continental Prestige Electronics
Argo Parts USA
$0.540
Netroflash
Ampacity Inc.
$0.610
Semicontronic
$0.595
$0.592
Corphita
$0.648
Aztec Data Supply Inc.
$6.210
AZTECH Wire
$8.387
Kepictronics
Lixinc
Kulean Microsystems
A-Z Elektronik GmbH
Problanco Electronics
Authorized Procurement Solutions
TANS Electronics
SupplyDigital Components
Alle Elektronik GmbH
iodParts Technologies Inc.
Supply Digital
UHIMA Technologies
Microchip USA
This material is lightweight and durable, making the product suitable for a wide range of applications.
The surface mount feature makes installation easy and efficient, saving time and effort during assembly.
With a high maximum operating temperature, this product can withstand demanding environmental conditions.
Voltage-mode control allows for precise regulation of output voltage, ensuring stability and reliability in operation.
The high maximum output current ensures that the product can power various components effectively and efficiently.
Switching Regulators & Controllers FAN5362UMP33X attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
FAN5362UMP33X Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KYOCERA AVX
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Rochester Electronics
Motorola
Goodwork Semiconductor
Gulf Semiconductor
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LTM4607IV#PBF
Analog Devices
Analog Devices LTM4607IV#PBF is a 141-terminal switching regulator with 440 kHz max frequency, ideal for industrial applications. Features include 4.5-36V input range, 6V output voltage, and -40 to 85°C operating temp. Suitable for current-mode control in compact designs requiring high efficiency.
LM25011Q1MYX/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e3;
LM5118MHX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
EN5322QI-T
Intel
EN5322QI-T by Intel is a voltage-mode switching regulator with 24 terminals, operating b/w -40 to 85°C. It has a max output current of 2A and operates at a frequency of up to 4MHz. Ideal for industrial applications requiring efficient power management in compact spaces.
MPQ2918GL-AEC1-Z
Monolithic Power Systems
MPQ2918GL-AEC1-Z by Monolithic Power Systems is a 20-terminal switching controller with current-mode control, operating b/w -40 to 125 °C. It features a max output voltage of 25 V and supports pulse width modulation with a max switching frequency of 1000 kHz. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.
L5972D013TR
STMicroelectronics
STMicroelectronics L5972D013TR is a MOS switching regulator with 3A output current, 280kHz max switching frequency, and voltage-mode control. Ideal for automotive applications, it operates b/w -40 to 125°C with input voltage range of 4.4-36V in a small outline package.
TPS63020DSJT
TPS63020DSJT by Texas Instruments is a switching regulator with 14 terminals, operating temperature range of -40 to 85°C, and output current up to 4.5A. Ideal for industrial applications requiring a compact design, it supports input voltages from 1.8V to 5.5V and offers pulse width modulation control for efficient power management at frequencies up to 2600kHz.
TPS40210DGQG4
TPS40210DGQG4 by Texas Instruments is a current-mode switching regulator with a 7-9V output range, ideal for automotive applications. Operating from -40 to 125°C, it supports input voltages from 4.5 to 52V and offers a max switching frequency of 1MHz. The compact package features a small outline design with dual terminals and Gull Wing form factor.
TPS560200DBVT
TPS560200DBVT by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 125°C, and output current up to 0.775A. Ideal for automotive applications due to its compact size (2.9mm x 1.6mm) and pulse width modulation control technique at a max frequency of 600kHz.
SG3525AN
Silicon General
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Operating Temperature: 0 Cel;
TPS82140SILT
TPS82140SILT by Texas Instruments is a voltage-mode switching regulator with 2A output current, operating temperature range of -40 to 125°C. Ideal for automotive applications, it offers a wide input voltage range from 3V to 17V and supports pulse width modulation control technique.
LM5164QDDARQ1
LM5164QDDARQ1 by Texas Instruments is a switching regulator with 1A output current, 90V max output voltage, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and small outline package style.
PUCC12050DVE
The Texas Instruments PUCC12050DVE is a 16-terminal switching regulator with a nominal input voltage of 5V and output voltage of 3.3V. With a temperature range from -40 to 125°C, it's ideal for automotive applications. This compact device in small outline package is surface mountable and features gull wing terminals.
LMZM23600V3SILR
LMZM23600V3SILR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max switching frequency of 1090kHz. It operates in automotive temperature grades, making it suitable for various automotive applications requiring precise voltage regulation within the range of 1.2V to 15V. The device features pulse width modulation control technique and buck-boost switcher configuration, ideal for compact microelectronic assemblies with limited space constraints.
LNK304PN
Power Integrations
LNK304PN by Power Integrations is a switching regulator IC with 8 terminals and a max output current of 0.4A. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a max switching frequency of 70kHz, this IC uses pulse width modulation control technique in a buck switcher configuration.
LM5017SDX/NOPB
LM5017SDX/NOPB by Texas Instruments is a switching regulator with max output voltage of 90V, max output current of 0.6A, and max switching frequency of 1MHz. Ideal for automotive applications due to its temp grade and small outline package style.
LMR16006XDDCT
LMR16006XDDCT by Texas Instruments is a switching regulator with a max output voltage of 55V and max output current of 0.6A, suitable for automotive applications. It operates in buck configuration with pulse width modulation control technique, offering a wide input voltage range from 4V to 60V and high switching frequency up to 2100 kHz.
LM2841YMK-ADJL/NOPB
LM2841YMK-ADJL/NOPB by Texas Instruments is a switching regulator with max output voltage of 34V, current-mode control, and max output current of 0.3A. Ideal for automotive applications due to its small outline, thin profile package style and wide operating temperature range from -40°C to 125°C.
TPS54361DPRR
TPS54361DPRR by Texas Instruments is a switching regulator with a max output current of 3.5A and a max output voltage of 59V, suitable for industrial applications. It operates in current-mode control with a pulse width modulation technique, offering a wide input voltage range from 4.5V to 60V and a compact package style ideal for space-constrained designs.
LM2594MX-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FAN5331SX
Onsemi
FAN5331SX by Onsemi is a small outline, low profile switching regulator with 5 terminals. It operates b/w -40 to 85°C and supports input voltage range of 2.7-5.5V. With a max output current of 1A and PWM control technique, it's ideal for boost applications in industrial settings.
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN5354MPX
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN5354MPX by Onsemi is a voltage-mode switching regulator with 5.5A output current and 3300kHz switching frequency. It operates b/w -40 to 85°C, suitable for industrial applications. The compact rectangular package with 12 terminals and no-lead form makes it ideal for space-constrained designs.
FAN54015UCX
FAN54015UCX by Onsemi is a switching regulator with 5V nominal voltage, 1.8V output voltage, and 1.908A max output current. It operates in buck-boost configuration with a control mode of current-mode PWM, suitable for power supplies requiring precise regulation in compact designs at temperatures ranging from -30 to 85°C.
FAN501AMPX
BATTERY CHARGE CONTROLLER; No. of Terminals: 10; Surface Mount: YES; JESD-609 Code: e4; Package Body Material: PLASTIC/EPOXY; Maximum Time At Peak Reflow Temperature (s): 30;
BATTERY CHARGE CONTROLLER; No. of Terminals: 10; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: NICKEL PALLADIUM GOLD;
FAN5336MPX
FAN5336MPX by Fairchild Semiconductor is a switching regulator with a max output current of 1.8A and a max switching frequency of 1850kHz. It is commonly used in boost applications and operates at temperatures ranging from -40°C to 85°C.
FAN5903UCX
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 9; Package Code: FBGA; Package Shape: SQUARE; Surface Mount: YES;
FAN5903UCX by Onsemi is a switching regulator with max output current of 2.4A and max switching frequency of 6600 kHz. It operates in industrial temperature range (-40 to 85°C) and features current-mode control. Ideal for applications requiring high efficiency power conversion in compact electronic devices.
FAN5362UMP33X
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
FAN5033MPX
FAN5033MPX by Fairchild Semiconductor is a 32-terminal switching controller with current-mode control, operating b/w 0-85°C. It features a single switcher configuration with a max frequency of 4500 kHz and supports input voltages from 9.6V to 14.4V. Ideal for applications requiring efficient pulse width modulation in compact spaces.
FAN5350MPX
FAN53600AUC33X
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: FBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN53200UC35X
FAN53200UC35X by Onsemi is a 20-terminal switching regulator with voltage-mode control, operating b/w -40 to 85°C. It offers a max output current of 5A and a max switching frequency of 2750 kHz. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
FAN53525UC96X
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 15; Package Code: FBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 15; Package Code: FBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FAN5362UMP29X
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved