Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC33063AP1G by Onsemi is a switching regulator with 8 terminals, operating b/w -40 to 85°C. It supports voltage-mode control, PWM technique, and buck-boost configuration. Ideal for industrial applications requiring a max output current of 1.5A at frequencies up to 100kHz.
Median Price
$1.080
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Rochester
1+ parts
$0.488
100+ parts
$0.459
1k+ parts
$0.415
10k+ parts
-
RS Americas
$1.060
$0.840
$0.690
RS (Exports)
$1.100
Farnell
$1.340
$0.559
$0.485
Element14
$1.430
$0.740
$0.680
$0.653
Newark
$1.510
$0.894
$0.731
$0.631
Adafruit Industries
$13.073
$12.419
Arrow
$0.513
$0.463
$0.432
Chip1Stop
$0.417
$0.402
$0.401
Verical
$0.528
Digiode
$0.464
Nova Conductors
$2.090
Galco
$2.290
Ozdisan Elektronik
$57.130
Chip Stock
Flip Electronics
Vyrian
NAC Semi
$0.855
IBS Electronics
$0.768
$0.733
DigiKey Marketplace
Micros
$0.565
Partservice
$1.172
$0.558
Micros sp.j. W. Kędra i J. Lic
$0.834
$0.597
Rebound Electronics
Cyclops Electronics Ltd
ComSIT Distribution GmbH
PC Components Company LLC
Bristol Electronics
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Ampacity Inc.
$0.354
Semicontronic
$0.345
$0.343
Corohmni
$0.388
Corphita
$0.439
Argo Parts USA
$0.442
$0.429
Continental Prestige Electronics
$0.433
Allen Electronics Distributors
$0.500
$0.475
Benley Electronics
$0.750
Bastille Electronics
$1.986
$1.886
$1.860
Microchip USA
$5.850
Aztec Data Supply Inc.
$9.650
Advanced Electronics
RC Electronics
$0.450
$0.410
$0.400
Perfect Parts
iodParts Technologies Inc.
Authorized Procurement Solutions
A-Z Elektronik GmbH
TANS Electronics
Lixinc
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
GreenTree Electronics
Kepictronics
Eastek
UHIMA Technologies
Robosynatics
Lucentia Tech
S.R.D Solutions
Futuretech Components
This material provides durability and protection for the internal components of the switching regulator, ensuring long-term reliability.
Having 8 terminals allows for more connections and flexibility in the circuit design, accommodating various input and output configurations.
With a high maximum operating temperature, this switching regulator can perform reliably in demanding industrial environments without overheating.
The 5 V nominal input voltage is a common standard in many electronic devices, making this switching regulator compatible with a wide range of applications.
A high maximum output current of 1.5 A allows this switching regulator to power multiple components or devices simultaneously, providing efficient energy conversion.
Switching Regulators & Controllers MC33063AP1G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
MC33063AP1G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
EU2B-YS3203C
Idec
ROTARY SWITCH;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
Toshiba
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LMR14203XMKX/NOPB
Texas Instruments
LMR14203XMKX/NOPB by Texas Instruments is a switching regulator with max output voltage of 34V, operating temp range -40 to 125°C, and max output current of 0.3A. Ideal for automotive applications due to its compact size, PWM control technique, and buck switcher configuration.
LM25011Q1MYX/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e3;
LM2594HVM-5.0/NOPB
LM2594HVM-5.0/NOPB by Texas Instruments is a switching regulator with a max output voltage of 37V, ideal for automotive applications. It operates b/w -40 to 125°C, with a max output current of 0.5A and control mode in voltage-mode PWM technique.
UCC28C44DR
UCC28C44DR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature range from -40°C to 105°C, making it suitable for various power supply applications. With a small outline package style and surface-mount capability, this BICMOS technology-based IC is ideal for compact designs requiring efficient pulse width modulation control.
LM2676S-ADJ
LM2676S-ADJ by Texas Instruments is a switching regulator with a max output current of 5.4A and a max output voltage of 37V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
MC34063AP1G
MC34063AP1G by Onsemi is a switching regulator with 8 terminals, operating temp of 0-70°C, and max output current of 1.5A. Ideal for voltage-mode control applications in commercial-grade electronics due to its buck-boost configuration and PWM control technique.
LM2576T-ADJ
Semtech
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS54335ADDAR
TPS54335ADDAR by Texas Instruments is a switching regulator with a max output current of 3A and a max switching frequency of 1500kHz. It is commonly used in industrial applications for voltage regulation with an input voltage range of 4.5V to 28V.
LM25011Q1MYX/NOPB by Texas Instruments is a switching regulator with 10 terminals, operating at -40 to 125°C. It has a max output current of 2A and supports input voltages from 6V to 42V. Ideal for automotive applications, it offers a control mode of current/voltage and a max switching frequency of 2000 kHz.
LM2842XMK-ADJL/NOPB
LM2842XMK-ADJL/NOPB by Texas Instruments is a switching regulator with a max output current of 0.6A and a control mode of current-mode PWM. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various applications such as power management in automotive electronics.
LM2842YMK-ADJL/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL494IN
Rochester Electronics
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM2596S-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LTM8055MPY#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: MILITARY; No. of Terminals: 121; Package Code: BGA; Package Shape: SQUARE; Surface Mount: YES;
LMR14206XMKX/NOPB
LMR14206XMKX/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It has a buck switcher config, PWM control mode, and can handle up to 0.6A output current. Ideal for automotive applications due to its compact size and high efficiency at a max frequency of 1500kHz.
LM2576HVS-5.0/NOPB
LM2576HVS-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 7.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates in a buck configuration with a control technique of pulse width modulation, offering high efficiency and reliability in a small outline package style.
LM2596S-5.0/NOPB
TPS54340DDAR
TPS54340DDAR by Texas Instruments is a switching regulator with 3.5A output current, 41V max output voltage, and 2500kHz max switching frequency. Ideal for automotive applications due to its low profile design and wide temperature range (-40 to 125°C).
LMZ14201HTZX/NOPB
LMZ14201HTZX/NOPB by Texas Instruments is a switching regulator with 7 terminals, operating b/w -40 to 125°C. It offers a voltage output range of 5-24V and supports buck-boost configuration. Ideal for automotive applications due to its compact size (10.16x9.85x4.82mm) and high max switching frequency of 1000 kHz.
TPS54040ADGQR
TPS54040ADGQR by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 42V, suitable for automotive applications. It operates in current-mode control with a min output voltage of 0.8V and supports pulse width modulation as the control technique, making it ideal for compact designs requiring efficient power management at temperatures ranging from -40 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC33063ADR2G
MC33063ADR2G by Onsemi is a voltage-mode switching regulator with max output current of 1.5A and max input voltage of 40V. It operates in industrial temp range (-40 to 85°C) using pulse width modulation control technique. Ideal for applications requiring efficient buck-boost switcher config at up to 100kHz frequency.
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33063ADR
MC33063ADR by Texas Instruments is a switching regulator with VOLTAGE-MODE control, operating b/w -40 to 85 °C. It has a max output voltage of 40V and can handle up to 1.5A output current. Ideal for industrial applications requiring efficient power conversion in a compact SMALL OUTLINE package.
MC33063ADRJR
MC33063ADRJR by Texas Instruments is a switching regulator with VOLTAGE-MODE control, operating at -40 to 85 °C. It has a max output voltage of 40V and can handle up to 1.5A output current. Ideal for industrial applications requiring efficient buck-boost configurations in compact designs.
MC33063ADG
MC33063ADG by Onsemi is a switching regulator with 1.5A output current, PWM control mode, and 100kHz max switching frequency. Ideal for industrial applications due to its -40 to 85°C operating temperature range and compact small outline package.
MC33063ADRG4
MC33063ADRG4 by Texas Instruments is a voltage-mode switching regulator with 5V nominal input and output voltages up to 40V. It operates in industrial temperature range (-40 to 85°C) with PWM control technique at a max frequency of 100 kHz. Ideal for applications requiring compact design, high efficiency, and low power consumption.
MC33063ADRE4
MC33063ADRE4 by Texas Instruments is a switching regulator with Vsup of 5V, Isup of 4mA, and output current of 1.5A. Ideal for industrial applications, it operates b/w -40 to 85°C and supports voltage-mode control technique in a compact rectangular package.
MC33063ADRJRG4
MC33063ADRJRG4 by Texas Instruments is a switching regulator with 1 function, operating at a max frequency of 100 kHz. It has a small outline package style and is suitable for industrial applications.
MC33063AP1G
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC33063AQDRQ1
MC33063AQDRQ1 by Texas Instruments is a voltage-mode switching regulator with 5V nominal input and output voltages ranging from 1.25V to 40V. It operates in automotive-grade temperatures (-40°C to 125°C) with a max output current of 1.5A, making it ideal for automotive applications requiring efficient power management.
MC33063AD
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Fairchild Semiconductor
Motorola
MC33063AVDG
MC33063AVDG by Onsemi is a switching regulator with a max output current of 1.5A and a max switching frequency of 100kHz. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
MC33063ADG4
MC33063ADG4 by Texas Instruments is a voltage-mode switching regulator with 8 terminals and Vsup of 5V. It operates b/w -40 to 85 °C, with output voltage ranging from 1.25V to 40V at a max current of 1.5A. Ideal for industrial applications requiring PWM control and buck-boost configuration up to 100 kHz frequency.
MC33063P1
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved