Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EMI4183MUTAG by Onsemi is a Data Line Filter with 16 terminals, operating temperature range of -40 to 85 °C. It features Nickel/Gold/Palladium terminal finish and surface mounting type. Ideal for applications requiring noise suppression in data lines.
Median Price
$0.439
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.423
1k+ parts
$0.351
10k+ parts
$0.313
DigiKey
$0.530
Verical
$0.391
Vyrian
$0.319
Digiode
$0.330
DigiKey Marketplace
$0.360
Chip Stock
Corphita
$0.312
Corohmni
Native Components
$0.581
Northwest PG Solutions
$0.639
Andel Nordic
$2.269
$2.178
Continental Prestige Electronics
Perfect Parts
Kulean Microsystems
A-Z Elektronik GmbH
SupplyDigital Components
TANS Electronics
Authorized Procurement Solutions
GreenTree Electronics
Problanco Electronics
UHIMA Technologies
Kepictronics
Having 16 terminals allows for a more secure and stable connection, reducing the risk of signal interference.
A data line filter helps to eliminate noise and interference in data transmission, ensuring a clean and reliable signal.
With a high maximum operating temperature, this data line filter can withstand heat and maintain its performance under challenging conditions.
The low minimum operating temperature ensures that this data line filter can function in cold environments without compromising efficiency.
The use of nickel, gold, and palladium finishes on the terminals improves conductivity and corrosion resistance, resulting in a longer lifespan for the product.
The surface mount design enables easy installation and integration into various electronic devices or systems.
Plastic packaging provides durability and protection for the internal components, making this data line filter suitable for industrial and commercial applications.
Data Line Filters EMI4183MUTAG attributes and parameters. Explore more Data Line Filters devices from Onsemi
Filter Type:
Manufacturer Series:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Material:
Sub-Category:
Terminal Finish:
EMI4183MUTAG Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
NXP Semiconductors
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Semiconductor Technology
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BLM18SG121TN1J
Murata Manufacturing
BLM18SG121TN1J by Murata Manufacturing is a chip bead data line filter with 2 terminals and a case code of 0603. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used for noise suppression in electronic circuits.
HI1206N101R-10
Laird Technologies
HI1206N101R-10 by Laird Technologies is a chip bead data line filter with 2 terminals. It operates b/w -40 to 125 °C, offering a DC resistance of 0.035 ohm and output impedance of 100 OHM. Ideal for applications requiring noise suppression in the frequency range of 25-1000 MHz.
742792655
Wuerth Elektronik & Kg
The Wurth Elektronik 742792655 is a data line filter with a multi-layer construction. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is suitable for applications requiring a frequency range of 100 MHz to 600 MHz.
HZ0603B112R-10
Steward
FERRITE CHIP; Maximum DC Resistance: .8 ohm; Rated Current: .2 A; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; No. of Terminals: 2;
BK2125HS470-T
Taiyo Yuden
The Taiyo Yuden BK2125HS470-T is a chip bead data line filter with 2 terminals, rated for 1000V and operating b/w -55 to 125°C. With dimensions of L2.0xB1.25xH0.85 mm, it offers a max DC resistance of 0.05 ohm and output impedance of 47 ohm at 100 MHz, suitable for surface mount applications in electronic devices.
7427927310
7427927310 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, has a max DC resistance of 0.03 ohm, and an output impedance of 10 ohm. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
PBY201209T-600Y-N
Yageo
Yageo's PBY201209T-600Y-N chip bead filter features 2 terminals, matte tin finish, and 60 ohm output impedance. With dimensions of L2.0XB1.25XH0.9 (mm), it is ideal for data line filtering applications at frequencies ranging from 100 MHz to DC resistance of 0.03 ohm. This surface mount component has a rated current of 3 A and is packed in tape and reel format for easy installation.
TLC/2.5A-101M-00
Fastron Electronics
Fastron Electronics' TLC/2.5A-101M-00 is a 100uH data line filter with 2 terminals, AEC-Q200 approval, and -55 to 115°C operating range. Ideal for applications requiring 2.5A rated current, it offers low 0.06 ohm DC resistance and through-hole mounting in a compact 14x31mm size.
ACM7060-701-2PL-TL01
TDK
TDK's ACM7060-701-2PL-TL01 is a data line filter with 2 functions, rated at 80V and 4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L7.0xB6.0xH3.5 mm. Ideal for applications requiring noise suppression in data lines.
51-750-309
Spectrum Control
DATA LINE FILTER; Rated Current: 10 A; Mounting Type: THROUGH HOLE MOUNT; Dimensions: D4.95XH6.32 (mm)/D0.195XH0.249 (inch); Rated Voltage: 70 V; Height: 6.32 mm;
BLM21PG331SN1
Murata Manufacturing's BLM21PG331SN1 is a Ferrite Chip Data Line Filter with 330 Ohm Output Impedance, 1.5A Rated Current, and -55 to 125°C Operating Temperature range. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
MMZ1608R301ATA00
TDK's MMZ1608R301ATA00 is a 0603 chip bead filter with max operating temp of 125°C and min of -55°C. With dimensions L1.6xB0.8xH0.8 (mm), it has output impedance of 300Ω, ideal for data line filtering applications.
EMI9408MUTAG
EMI9408MUTAG by Onsemi is a data line filter with 8 functions and 16 terminals. It offers an inductance of 0.07uH, capacitance of 24uF, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a temperature range from -40 to 85°C.
BLM18BA100SN1D
Murata Manufacturing's BLM18BA100SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.25 ohm. Ideal for surface mount applications, it provides an output impedance of 10 ohm and rated current of 0.5A in filtering data lines at frequencies above 100MHz.
DLM11GN601SD2D
Murata's DLM11GN601SD2D is a data line filter with 2 functions, rated at 5V and 0.1A. It offers high insulation resistance of 100 Mohm, operates b/w -40°C to 85°C, and has an output impedance of 600 ohms. Ideal for surface mount applications in electronic devices requiring noise filtering.
NFE61PT472C1H9L
Murata Manufacturing's NFE61PT472C1H9L is a 3-terminal data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 4700uF capacitance. It operates b/w -25°C to 85°C and is ideal for surface mount applications requiring noise filtering in data lines.
ACM2012-121-2P-T002
TDK's ACM2012-121-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.37A. With dimensions of L2.0xB1.2xH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
SRF2012-900YA
Bourns
Bourns SRF2012-900YA is a Data Line Filter with 2 functions, rated at 50V and 0.4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 125 °C, and has a compact size of L2.0xB1.2XH1.2 (mm). Ideal for applications requiring effective filtering in limited space like consumer electronics and communication devices.
Chilisin Electronics
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A; Output Impedance (ohm): 60 OHM;
MMZ2012S102AT000
MMZ2012S102AT000 by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it has a max DC resistance of 0.35 ohm and rated current of 0.5 A, making it suitable for surface mount applications in electronic devices requiring noise suppression.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EMI4192MTTAG
EMI4192MTTAG by Onsemi is a Data Line Filter with 2 functions and 10 terminals. It has a max operating temperature of 85°C, DC resistance of 5 ohm, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a capacitance of 1.3 uF in plastic/epoxy packages.
EMI4193MTTAG
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Rated Current: .1 A; Minimum Operating Temperature: -40 Cel; Attenuation At Minimum Frequency: 16 dB; Maximum Operating Temperature: 85 Cel;
EMI4162MUTAG
DATA LINE FILTER; Rated Current: .1 A; No. of Functions: 4; Length: 2.5 mm; Terminal Finish: Nickel/Gold/Palladium (Ni/Au/Pd); Output Impedance (ohm): 50 OHM;
EMI4163MUTAG
DATA LINE FILTER; Package Material: PLASTIC; Terminal Finish: Nickel/Gold/Palladium (Ni/Au/Pd); Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT;
EMI4172MTTAG
DATA LINE FILTER; Minimum Operating Temperature: -40 Cel; No. of Terminals: 10; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Package Material: PLASTIC;
EMI4182MTTAG
DATA LINE FILTER; Rated Current: .1 A; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 50 OHM; Terminal Finish: Nickel/Gold/Palladium (Ni/Au/Pd); Mounting Type: SURFACE MOUNT;
EMI4182MUTAG
EMI4182MUTAG by Onsemi is a Data Line Filter with 10 terminals, operating b/w -40°C to 85°C. It features Nickel/Gold/Palladium finish and is surface mountable in plastic package. Ideal for applications requiring noise filtering in data lines.
EMI4183MTTAG
DATA LINE FILTER; Rated Current: .1 A; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Approvals (V): IEC; No. of Functions: 3;
EMI4184MUTAG
DATA LINE FILTER; JESD-609 Code: e4; No. of Terminals: 20; Minimum Operating Temperature: -40 Cel; Package Material: PLASTIC; Mounting Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved