Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EMI4182MTTAG by Onsemi is a Data Line Filter with 2 functions and 10 terminals. It operates b/w -40°C to 85°C, with a width of 2.0mm and length of 2.5mm. This filter has an output impedance of 50Ω, capacitance of 0.8uF, and is suitable for applications requiring IEC approvals in surface mount configurations.
Median Price
$0.259
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Farnell
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$0.555
Chip Stock
Vyrian
Netsource Technology, Inc.
Digiode
North Shore Components
Corohmni
Ampacity Inc.
$0.479
Aranea Global
$0.544
$0.523
AZTECH Wire
$8.102
Authorized Procurement Solutions
Kepictronics
TANS Electronics
SupplyDigital Components
Glotronic Ltd.
Problanco Electronics
Kulean Microsystems
A-Z Elektronik GmbH
Corphita
UHIMA Technologies
ChipstoGo Electronic ltd
Having IEC approvals ensures that this data line filter meets international safety and quality standards.
With 2 functions, this data line filter can effectively filter out interference and noise from the data lines, improving data transmission quality.
Being specifically designed as a data line filter means that it is optimized for filtering out noise and interference from data lines, ensuring reliable data transmission.
With a high maximum operating temperature of 85°C, this data line filter can withstand high heat conditions, making it suitable for a variety of environments.
The low minimum operating temperature of -40°C ensures that this data line filter can also function effectively in cold environments.
Having an output impedance of 50 ohms means that this data line filter can effectively match impedance with data lines, reducing signal loss and interference.
The surface mount design makes it easy to install this data line filter on circuit boards, saving space and simplifying the assembly process.
With a rated current of 0.1 ampere, this data line filter is suitable for low-power data line applications, ensuring safe and efficient operation.
The capacitance of 0.8 microfarads helps to filter out high-frequency noise and interference from data lines, improving signal quality and reliability.
Data Line Filters EMI4182MTTAG attributes and parameters. Explore more Data Line Filters devices from Onsemi
Approvals (V):
Capacitance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
EMI4182MTTAG Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Ksl Microdevices
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Yageo
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
LM358N
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
IP4256CZ5-W,115
Nexperia
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Rated Voltage: 5.6 V; Length: 1.7 mm; No. of Functions: 1; Approvals (V): IEC;
LFBK1608TS102-T
Taiyo Yuden
LFBK1608TS102-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1.6x0.8x0.8mm, it's ideal for surface mount applications requiring an output impedance of 1000Ω and rated current of 0.3A.
51-750-309
Api Technologies
51-750-309 by Api Technologies is a Data Line Filter with 70V rated voltage and 10A rated current. With a max insertion loss of 65dB, it is ideal for panel mount applications requiring high capacitance at 12000uF. Its compact size of 4.95mm diameter and 26.62mm height make it suitable for various electronic devices.
MPZ1005S121CT
TDK
The TDK MPZ1005S121CT is a chip bead data line filter with 2 terminals, rated for 1.2A current and 120 ohm output impedance. It operates b/w -40°C to 85°C, suitable for applications requiring noise suppression in circuits up to 100MHz frequency range. Dimensions: L1.0xB0.5xH0.5 (mm).
HI0805R800R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: 5 A;
BLM18PG121SN1J
Murata Manufacturing
Murata Manufacturing's BLM18PG121SN1J is a chip bead data line filter with 2 terminals, dimensions of 1.6x0.8x0.8mm, and output impedance of 120Ω. It operates b/w -55°C to 125°C, has a DC resistance of 0.05 ohm, and is suitable for surface mount applications in filtering frequencies from 100 MHz with a rated current of 2A.
ACT45B-510-2P-TL003
ACT45B-510-2P-TL003 by TDK is a data line filter with 2 functions, rated voltage of 50V, and max operating temperature of 150°C. It has a min insulation resistance of 10 Mohm and dimensions of L4.5xB3.2xH2.8 (mm). Ideal for applications requiring noise suppression in data lines with a rated current of 0.2A.
ACM7060-301-2PL-TL
The TDK ACM7060-301-2PL-TL is a data line filter with 2 functions, rated at 80V and 5A. It offers a min insulation resistance of 10 Mohm and operates b/w -25°C to 85°C. Ideal for applications requiring noise suppression in data lines with its compact dimensions of L7.0xB6.0xH3.5 mm.
CM1422-03CP
California Micro Devices
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 50 OHM; Manufacturer Series: CM1422; Capacitance: 15 uF; Dimensions: L4.045XB1.503XH0.714 (mm)/L0.159XB0.059XH0.028 (inch);
74279228111
Wuerth Elektronik & Kg
Wurth Elektronik 74279228111 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 4.1A current and 110 ohm output impedance. Operating b/w -55 to 125 °C, it's ideal for surface mount applications requiring noise suppression in electronic circuits.
B82790C0113N201
TDK B82790C0113N201 is an 80V data line filter with 11uH inductance and 0.08 ohm DC resistance. It has UL and IEC approvals, suitable for applications requiring a 50 OHM output impedance in surface mount configurations.
BLM31AJ260SN1L
Murata Manufacturing's BLM31AJ260SN1L is a FERRITE CHIP filter with 2 terminals, rated at 0.5A. With dimensions of L3.2xB1.6xH1.1mm, it offers an output impedance of 26Ω and max DC resistance of 0.05Ω. Ideal for data line filtering applications due to its surface mounting type and operating temperatures ranging from -55°C to 125°C.
BKP2125HS600-T
Taiyo Yuden's BKP2125HS600-T is an 0805 multilayer chip data line filter with 2 terminals. Featuring a ferrite chip construction, it offers a max operating temp of 85°C and min of -55°C. Ideal for applications requiring a 60Ω output impedance at frequencies ranging from 100 MHz, this surface mount filter has dimensions of L2.0xB1.25xH0.85 (mm) and can handle up to 3A rated current.
LI0805G301R-10
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .7 A; No. of Functions: 1; Terminal Finish: Tin (Sn); Output Impedance (ohm): 300 OHM;
MPZ1608S101AT
TDK's MPZ1608S101AT is a 0603 chip bead filter with 2 terminals. It offers a max operating temp of 125°C and min freq of 100 MHz. Ideal for data line filtering, it has a DC resistance of 0.03 ohm and output impedance of 100 ohm, suitable for surface mount applications.
B82790C0513N201
TDK B82790C0513N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. It has 4 terminals, matte tin over nickel finish, and 0.14 ohm max DC resistance. Ideal for applications requiring a compact surface mount filter with 50 ohm output impedance.
LFBK2125HS470-T
LFBK2125HS470-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0XB1.25XH0.85 (mm), it is ideal for surface mount applications requiring an output impedance of 47 OHM and rated current of 1 A.
BLM18AG601SH1D
Murata Manufacturing's BLM18AG601SH1D is an AEC-Q200 compliant chip bead filter with 2 terminals, ideal for data line applications. With a max operating temperature of 125°C and DC resistance of 0.38 ohm, it offers effective filtering at frequencies ranging from 100 MHz. This surface mount ferrite chip measures L1.6xB0.8xH0.8 (mm) and is suitable for use in automotive electronics due to its high output impedance of 600 OHM.
BLM03AX241SN1D
Murata Manufacturing's BLM03AX241SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.38 ohm, output impedance of 240 OHM, and rated current of 0.35 A. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM21BD471SN1D
Murata's BLM21BD471SN1D is an 0805 chip bead filter with 470 OHM output impedance, 0.35 ohm DC resistance, and 100 MHz frequency range. Ideal for data line filtering applications due to its compact size (L2.0XB1.25XH0.85 mm) and surface mounting type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EMI4192MTTAG
EMI4192MTTAG by Onsemi is a Data Line Filter with 2 functions and 10 terminals. It has a max operating temperature of 85°C, DC resistance of 5 ohm, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a capacitance of 1.3 uF in plastic/epoxy packages.
EMI4193MTTAG
DATA LINE FILTER; Maximum DC Resistance: 5 ohm; Rated Current: .1 A; Minimum Operating Temperature: -40 Cel; Attenuation At Minimum Frequency: 16 dB; Maximum Operating Temperature: 85 Cel;
EMI4162MUTAG
DATA LINE FILTER; Rated Current: .1 A; No. of Functions: 4; Length: 2.5 mm; Terminal Finish: Nickel/Gold/Palladium (Ni/Au/Pd); Output Impedance (ohm): 50 OHM;
EMI4163MUTAG
DATA LINE FILTER; Package Material: PLASTIC; Terminal Finish: Nickel/Gold/Palladium (Ni/Au/Pd); Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT;
EMI4172MTTAG
DATA LINE FILTER; Minimum Operating Temperature: -40 Cel; No. of Terminals: 10; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Package Material: PLASTIC;
EMI4182MUTAG
EMI4182MUTAG by Onsemi is a Data Line Filter with 10 terminals, operating b/w -40°C to 85°C. It features Nickel/Gold/Palladium finish and is surface mountable in plastic package. Ideal for applications requiring noise filtering in data lines.
EMI4183MTTAG
DATA LINE FILTER; Rated Current: .1 A; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Approvals (V): IEC; No. of Functions: 3;
EMI4183MUTAG
DATA LINE FILTER; Manufacturer Series: EMI4183MU; Maximum Operating Temperature: 85 Cel; No. of Terminals: 16; Terminal Finish: Nickel/Gold/Palladium (Ni/Au/Pd); Mounting Type: SURFACE MOUNT;
EMI4184MUTAG
DATA LINE FILTER; JESD-609 Code: e4; No. of Terminals: 20; Minimum Operating Temperature: -40 Cel; Package Material: PLASTIC; Mounting Type: SURFACE MOUNT;
EMI4182MTTAG
Rochester Electronics
DATA LINE FILTER; Rated Current: .1 A; Capacitance: .8 uF; Packing Method: TR; Width (mm): 2.0; Mounting Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved