Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CS51021EDR16 by Onsemi is a switching controller with 1A output current, 1000 kHz max switching frequency, and 14V nominal input voltage. It operates in industrial temperature range (-40 to 85 °C) using pulse width modulation control technique. Ideal for applications requiring efficient power management in compact spaces.
Median Price
$0.713
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.687
1k+ parts
$0.570
10k+ parts
$0.508
DigiKey
$0.860
Verical
$0.635
Vyrian
$0.468
Digiode
$0.535
DigiKey Marketplace
Bristol Electronics
Atlantic Semiconductor
Corohmni
Corphita
$0.507
Component Stockers USA
$0.540
$0.480
Continental Prestige Electronics
Kulean Microsystems
TANS Electronics
Problanco Electronics
SupplyDigital Components
Northwest PG Solutions
Native Components
UHIMA Technologies
Provides durability and protection for the internal components of the switching regulator.
Allows for easy and efficient assembly onto circuit boards, saving space and reducing production time.
Ensures stable and accurate current control, improving overall performance of the regulator.
Capable of delivering up to 1 ampere of current, making it suitable for a variety of applications.
High switching frequency allows for fast response times and efficient power conversion, ideal for power management.
Switching Regulators & Controllers CS51021EDR16 attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
CS51021EDR16 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1554216002
Molex
WIRE AND CABLE;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LT8609SEV#PBF
Analog Devices
LT8609SEV#PBF by Analog Devices is a 16-terminal switching regulator with current-mode control, operating b/w -40 to 125°C. With a max output current of 5.7A and PWM control technique, it's ideal for automotive applications requiring a buck switcher with a wide input voltage range of 2.7-42V and high switching frequency up to 2200 kHz.
TPS62125DSGR
TPS62125DSGR by Texas Instruments is a switching regulator with a nominal input voltage of 12V and max output current of 0.3A. It operates in voltage-mode control technique, suitable for industrial applications requiring a compact design with a small outline package style. With a wide temperature range from -40°C to 85°C, it offers efficient power management in various electronic devices.
LMZ14203TZ-ADJ/NOPB
LMZ14203TZ-ADJ/NOPB by Texas Instruments is a switching regulator with 3A output current, 6V max output voltage, and 1000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact design with small outline package style.
171050601
Wuerth Elektronik & Kg
171050601 by Wurth Elektronik is a switching regulator with a control mode of current-mode and pulse width modulation. It has a nominal input voltage of 12V, nominal output voltage of 3.3V, and is designed for automotive applications due to its temperature grade. The package style is small outline with gull wing terminals, making it suitable for surface mount applications in various electronic devices.
TPS63001DRCRG4
TPS63001DRCRG4 by Texas Instruments is a switching regulator with a max output current of 2A and max operating temp of 85°C. Ideal for industrial applications, it operates in buck-boost configuration with a control mode of current-mode PWM. With a small outline package style, it offers a min output voltage of 3.3V.
TPS54160ADGQ
TPS54160ADGQ by Texas Instruments is a switching regulator with a max output current of 1.5A and a max input voltage of 60V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LMZ14202TZ-ADJ/NOPB
LMZ14202TZ-ADJ/NOPB by Texas Instruments is a switching regulator with 2A output current, 6V max output voltage, and 1000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
LM2576HVT-ADJLF03
National Semiconductor
LM2576HVT-ADJLF03 by National Semiconductor is a VOLTAGE-MODE switching regulator with 5 terminals, capable of 3A output current at a max frequency of 63kHz. Its PLASTIC/EPOXY body and IN-LINE style make it suitable for power supply applications requiring efficient voltage regulation.
UCC28180DR
UCC28180DR by Texas Instruments is a current-mode power factor controller with a max operating temperature of 125°C. It features a switching frequency of 250 kHz and is suitable for boost switcher configurations in automotive applications. The package style is small outline, making it ideal for surface mount designs with 8 terminals.
LM2674M-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS82140SILR
TPS82140SILR by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a voltage output range of 0.9-6V and can handle up to 2A output current. Ideal for automotive applications due to its compact size (3x2.8mm) and pulse width modulation control technique at a max frequency of 2500kHz.
LM2596S-12/NOPB
LM2596S-12/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating b/w -40 to 125°C. It has a voltage output range of 3.3V to 37V and can handle up to 3A output current. Ideal for automotive applications due to its compact size and buck switcher configuration.
PUCC12050DVE
The Texas Instruments PUCC12050DVE is a 16-terminal switching regulator with a nominal input voltage of 5V and output voltage of 3.3V. With a temperature range from -40 to 125°C, it's ideal for automotive applications. This compact device in small outline package is surface mountable and features gull wing terminals.
LM2672M-12/NOPB
LM5008MM/NOPB
LM5008MM/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It has a max output voltage of 75V and current mode control technique. Ideal for automotive applications due to its compact size, high efficiency, and wide input voltage range from 9.5V to 95V.
LT1933ES6#TRPBF
Analog Devices' LT1933ES6#TRPBF is a current-mode switching regulator with 1.05A output current, ideal for buck applications. Operating b/w 0-70°C, it supports input voltages from 3.6V to 36V and offers a max switching frequency of 600kHz in a small outline package.
TPS54308DDCT
TPS54308DDCT by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 350kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
LMR23625CDDAR
LMR23625CDDAR by Texas Instruments is a switching regulator with 2.5A output current, 1V min output voltage, and 30V max output voltage. Ideal for automotive applications, it operates b/w -40 to 125°C and has a compact package style of small outline with low profile.
LM5146QRGYRQ1
LM5146QRGYRQ1 by Texas Instruments is a switching controller with a max output current of 30A and a control technique of pulse width modulation. It operates in automotive applications, with a wide input voltage range from 5.5V to 100V and a max operating temperature of 150°C. This chip carrier package has 20 terminals and is surface mountable for compact designs.
LM2596SX-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CS5173EDR8G
CS5173EDR8G by Onsemi is a switching regulator with 2.4A output current, 620kHz max switching frequency, and boost switcher config. Ideal for automotive applications due to its -40 to 125°C temp range and small outline package style. Operates on input voltages from 2.7V to 30V, making it versatile for various power management needs.
CS5173GDR8G
CS5173GDR8G by Onsemi is a switching regulator with a max output current of 2.4A and a max switching frequency of 620kHz. It is commonly used in applications requiring boost control technique and operates within a temperature range of 0-125°C.
CS5172EDR8G
CS5172EDR8G by Onsemi is a switching regulator with 2.4A output current, operating at -40 to 125°C. It uses pulse width modulation control technique and has a boost switcher configuration. Ideal for automotive applications due to its small outline package and wide input voltage range of 2.7-30V.
CS5171GDR8G
CS5171GDR8G by Onsemi is a switching regulator with 2.4A output current, 310kHz max frequency, and boost switcher config. Ideal for applications requiring efficient power conversion in compact spaces. Operates b/w 0-125°C temp range with input voltage from 2.7V to 30V.
CS51414EDR8G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CS5171EDR8G
CS51221EDTB16G
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CS51031YDR8G
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CS51414EDR8
Cherry Semiconductor
CS51414EDR8 by Onsemi is a switching regulator with 3A output current, PWM control technique, and 594kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85°C and supports input voltages from 4.5V to 40V.
CS5171ED8G
CS5171GDR8
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CS51022AED16
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CS51021ED16
CS51022AEDR16
CS51022AEDR16G
CS51021AEDR16
CS-51022D16
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CS51021EDR16
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved