Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CAT5138SDI-10GT3 by Onsemi is a linear digital potentiometer with 6 terminals, operating at -40 to 85°C. It has a power supply of 3/5V and peak reflow temperature of 260°C. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
Median Price
$0.414
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Rochester
1+ parts
$0.257
100+ parts
$0.242
1k+ parts
$0.219
10k+ parts
-
Arrow
$0.563
$0.335
Mouser Electronics
$0.580
$0.329
$0.307
Newark
$0.608
$0.337
$0.288
$0.277
DigiKey
$0.610
$0.287
Chip1Stop
$0.251
$0.238
Flip Electronics (Authorized)
Verical
$0.261
$0.253
Farnell
$0.271
$0.233
$0.216
Element14
$0.399
$0.362
Digiode
$0.244
Nova Conductors
$1.235
Bristol Electronics
$1.313
$0.525
Chip Stock
Flip Electronics
Vyrian
Microfarads
Ampacity Inc.
$0.212
Semicontronic
$0.207
$0.206
Corphita
$0.231
Corohmni
Continental Prestige Electronics
$1.010
Microchip USA
$7.441
Aztec Data Supply Inc.
$14.390
iodParts Technologies Inc.
Perfect Parts
Kulean Microsystems
SupplyDigital Components
TANS Electronics
A-Z Elektronik GmbH
Argo Parts USA
Alle Elektronik GmbH
Authorized Procurement Solutions
Emar International I/E
Problanco Electronics
Netroflash
$1.210
$1.173
$1.148
UHIMA Technologies
Lixinc
GreenTree Electronics
The plastic/epoxy material provides durability and reliability, making the product long-lasting.
The surface mount capability allows for easy and efficient installation on circuit boards, saving space and simplifying the assembly process.
The linear resistance law provides accurate and consistent voltage control, ensuring precise adjustments in electronic circuits.
The compatibility with power supplies of 3V and 5V makes this product versatile and suitable for a wide range of applications.
The high maximum operating temperature of 85°C allows the product to withstand intense heat conditions, enhancing its reliability in various environments.
The terminal finish of nickel palladium gold provides excellent conductivity and corrosion resistance, ensuring stable and long-lasting electrical connections.
The industrial temperature grade indicates that the product is designed to perform reliably in harsh industrial environments, making it a suitable choice for rugged applications.
Digital Potentiometers (DigiPOT) CAT5138SDI-10GT3 attributes and parameters. Explore more Digital Potentiometers (DigiPOT) devices from Onsemi
Sub-Category:
Resistance Law:
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Terminal Form:
Terminal Position:
No. of Terminals:
Terminal Finish:
Terminal Pitch:
Package Shape:
Package Body Material:
Package Style:
Package Code:
Package Equivalence Code:
Qualified:
JESD-30 Code:
JESD-609 Code:
CAT5138SDI-10GT3 Converters trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Mult Devices 29/Aug/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Continental Device India
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AD5142ABRUZ10
AD5142ABRUZ10 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 35 ppm/°C temp coefficient, and 256 positions. It's used in automotive applications due to its CMOS technology, -40 to 125 °C operating range, and compact thin profile package.
DS1669-100
Dallas Semiconductor
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS1669-10
Maxim Integrated
DS1669-10 by Maxim Integrated is a 10000 ohm linear digital potentiometer with 64 positions. It operates in industrial temperature range (-40 to 85 °C) and has a nominal bandwidth of 1 kHz. Ideal for applications requiring precise resistance adjustments using push-button control interface.
MCP4017T-104E/LT
MCP4017T-104E/LT by Microchip is a 2-WIRE SERIAL digital potentiometer with 100000 ohm resistance, 128 positions, and 150 ppm/°C temperature coefficient. It is used in automotive applications due to its TS16949 screening level and -40 to 125 °C operating temperature range.
CAT5125TBI-10-GT3
Catalyst Semiconductor
CAT5125TBI-10-GT3 by Catalyst Semiconductor is a 10000 ohm linear digital potentiometer with 30 ppm/°C temp coefficient. It operates at -40 to 85 °C, has 32 positions, and uses INCREMENT/DECREMENT control interface. Ideal for applications requiring precise resistance adjustments in industrial settings.
DS1803Z-050
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
DS3502U+T&R/C
Analog Devices' DS3502U+T&R/C is a 10kΩ 2-WIRE SERIAL digital potentiometer with 128 positions and 20% resistance tolerance. It operates b/w -40°C to 100°C, has a max terminal voltage of ±15.5V, making it ideal for applications requiring precise resistance adjustments in temperature-sensitive environments.
AD7376ARWZ100
AD7376ARWZ100 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 35 ppm/°C temp coefficient, and +-5/+-15 V power supplies. It's used in industrial applications for precise resistance adjustments in compact designs.
MCP41HV31-503E/MQ
MCP41HV31-503E/MQ by Microchip: 100kΩ linear DigiPOT with 3-wire serial interface. Ideal for automotive applications, operates from -40 to 125°C. Features 256 positions, 18V max terminal voltage, and low supply current of 0.3mA.
ISL22316WFU10Z
Integrated Device Technology
DIGITAL POTENTIOMETER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
DS1804-010
DIGITAL POTENTIOMETER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS1804Z-100
DIGITAL POTENTIOMETER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MCP4161-103E/SN
MCP4161-103E/SN by Microchip is a digital potentiometer with 10000 ohm total resistance, 150 ppm/°C temp coefficient, and linear resistance law. It is used in automotive applications for increment/decrement control interface, with 129 positions and 1 kHz nominal bandwidth.
AD8400AR10-REEL
AD8400AR10-REEL by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, suitable for automotive applications. It operates b/w -40 to 125 °C with a bandwidth of 0.6 kHz and supports supply voltages of 3/5 V. The package style is small outline, making it ideal for compact designs.
MCP4019T-502E/LT
MCP4019T-502E/LT by Microchip is a 5000 ohm digital potentiometer with 2-wire serial control interface. It operates in the temperature range of -40 to 125 °C and has a max resistance tolerance of 20%. Ideal for automotive applications, it offers a bandwidth of 2 kHz and requires a nominal voltage of 5 V.
X9241AWSZ
Renesas Electronics
X9241AWSZ by Renesas Electronics is a 2-WIRE SERIAL digital potentiometer with 4 functions and a total resistance of 10k ohm. It operates b/w -3V to +5V, making it suitable for various applications in commercial-grade electronics requiring precise resistance adjustments. With a compact small outline package style, this device is ideal for space-constrained designs that demand high performance and reliability.
MCP4021-503E/SN
MCP4021-503E/SN by Microchip is a digital potentiometer with 50k ohm total resistance, 64 positions, and linear resistance law. It operates at -40 to 125 °C and has a supply voltage of 5 V, making it ideal for automotive applications requiring precise incremental/decremental control.
X9C503PZ
Renesas Electronics X9C503PZ is a 50kΩ linear digital potentiometer with INCREMENT/DECREMENT control interface. It operates b/w 0-70°C, has 8 terminals, and offers 100 positions. Ideal for applications requiring precise resistance adjustments in commercial-grade electronics.
MAX5419LETA+
Analog Devices' MAX5419LETA+ is a 2-WIRE SERIAL digital potentiometer with 200k ohm total resistance, 35 ppm/°C temp coefficient, and linear resistance law. Ideal for industrial applications, it operates b/w -40 to 85 °C with a small outline package and no-lead terminal form.
AD5124BRUZ100
AD5124BRUZ100 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 35 ppm/°C temp coefficient, and 128 positions. Ideal for automotive applications, it operates b/w -40 to 125 °C with a bandwidth of 3 kHz. The package style is small outline, thin profile, shrink pitch.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CAT5120SDI-10GT3
CAT5120SDI-10GT3 by Onsemi is a digital potentiometer with 10000 ohm resistance, 200 ppm/°C temp coefficient, and 5.5 V max terminal voltage. It's ideal for industrial applications requiring precise increment/decrement control in a compact package with dual terminals and nickel palladium gold finish.
CAT5120SDI-10-GT3
CAT5120SDI-10-GT3 by Catalyst Semiconductor is a 10000 ohm linear digital potentiometer with INCREMENT/DECREMENT control interface. It operates at -40 to 85 °C, has 16 positions, and uses NICKEL PALLADIUM GOLD finish. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
CAT5113VI-00-GT3
CAT5113VI-00-GT3 by Onsemi is a Digital Potentiometer with 100k ohm resistance, 300 ppm/°C temp coefficient, and 20% resistance tolerance. It is used in industrial applications for precise control of voltage levels through its INCREMENT/DECREMENT interface.
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
CAT5121SDI-10GT3
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
CAT5121SDI-10-GT3
CAT5113VI-01-GT3
CAT5171TBI-50GT3
CAT5171TBI-50GT3 by Onsemi is a 2-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 256 positions, and 100 ppm/°C temperature coefficient. Ideal for industrial applications requiring precise resistance adjustments in compact designs.
CAT5119SDI-00GT3
CAT5119SDI-00GT3 by Onsemi is a Digital Potentiometer with 100k ohm resistance, 200 ppm/°C temp coefficient, and 5.5V max terminal voltage. It's used in industrial applications for precise control of resistance values through an increment/decrement interface.
CAT5119SDI-00-GT3
CAT5113LI-01-G
CAT5113LI-01-G by Onsemi is a Digital Potentiometer with 1000 ohm resistance, 300 ppm/°C temp coefficient, and 20% resistance tolerance. It operates at -40 to 85 °C, suitable for industrial applications requiring precise resistance adjustments in a compact package.
CAT5172TBI-00GT3
CAT5172TBI-00GT3 by Onsemi is a 3-WIRE SERIAL digital potentiometer with 100000 ohm total resistance, 256 positions, and 100 ppm/°C temperature coefficient. Ideal for industrial applications requiring precise resistance adjustments in compact spaces.
CAT5110SDI-00GT3
CAT5110SDI-00-GT3
CAT5110SDI-00-GT3 by Catalyst Semiconductor is a Digital Potentiometer with 100k ohm resistance, 32 positions, and 200 ppm/°C temp coefficient. It is used in industrial applications for increment/decrement control interface, with a max operating temp of 85 °C and dual terminal position.
CAT5113VI-10-GT3
CAT5113VI-10-GT3 by Onsemi is a Digital Potentiometer with 10000 ohm resistance, 300 ppm/°C temp coefficient, and 20% tolerance. Ideal for industrial applications due to its linear resistance law, INCREMENT/DECREMENT control interface, and small outline package style.
CAT5113ZI-50-T3
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved