Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP4632-103E/UN by Microchip: 100kΩ linear digital potentiometer with 2-wire serial control. Operating range -40 to 125°C, suitable for automotive applications. Small outline package, 257 positions, and low supply current of 0.6mA make it ideal for precise resistance adjustments in compact designs.
Median Price
$1.200
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Microchip Technology
1+ parts
100+ parts
$0.890
1k+ parts
$0.870
10k+ parts
$0.850
Mouser Electronics
-
DigiKey
NAC Semi
$1.180
$1.070
$0.960
Vyrian
Nova Conductors
Corohmni
$0.882
Vigor
$0.950
Semicontronic
$1.020
$0.994
$0.989
Ampacity Inc.
$2.220
Aztec Data Supply Inc.
$12.890
Kepictronics
Assy Fe
Authorized Procurement Solutions
Continental Prestige Electronics
Fulton Briggs Corp.
Argo Parts USA
Lixinc
Bastille Electronics
The use of plastic/epoxy material makes the product lightweight and durable, ideal for applications where weight and durability are important factors.
Being surface mountable, this product saves space on the PCB and allows for efficient use of the board real estate.
With a low temperature coefficient, this product provides stable resistance values over a wide temperature range, ensuring accurate performance.
The 2-wire serial control interface allows for easy integration with microcontrollers and digital circuits, providing precise and flexible control over the resistance values.
With a high total resistance, this product can be used in a wide range of applications requiring precise and adjustable resistance values.
The high maximum terminal voltage allows for compatibility with a variety of power supply levels, making the product versatile in different circuit configurations.
The high maximum operating temperature ensures the product can withstand harsh environments and extended usage without compromising performance.
With a low minimum operating temperature, this product can be used in a wide range of environments, including extreme cold conditions.
The matte tin finish provides good solderability and ensures reliable electrical connections, making the product easy to integrate into PCB assemblies.
The CMOS technology used in this product offers low power consumption and high noise immunity, making it ideal for battery-powered and noise-sensitive applications.
Digital Potentiometers (DigiPOT) MCP4632-103E/UN attributes and parameters. Explore more Digital Potentiometers (DigiPOT) devices from Microchip Technology
Technology:
Sub-Category:
Nominal Bandwidth:
Resistance Law:
Nominal Total Resistance:
Control Interface:
No. of Functions:
Maximum Resistance Tolerance:
Additional Features:
Nominal Supply Voltage:
Minimum Resistor Terminal Voltage:
Maximum Resistor Terminal Voltage:
Maximum Supply Current:
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Nominal Temperature Coefficient:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Terminal Form:
Terminal Position:
No. of Terminals:
Terminal Finish:
Terminal Pitch:
No. of Positions:
Maximum Seated Height:
Width:
Length:
Package Shape:
Package Body Material:
Package Style:
Package Code:
Package Equivalence Code:
Qualified:
Screening Level:
JESD-30 Code:
JESD-609 Code:
MCP4632-103E/UN Converters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Packing Changes 10/Oct/2016 Label and Packing Changes 23/Sep/2015
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Temic Semiconductors
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
MCP40D17T-104E/LT
MCP40D17T-104E/LT by Microchip is a 2-WIRE SERIAL Digital Potentiometer with 100k ohm resistance, 128 positions, and 150 ppm/°C temp coefficient. Ideal for automotive applications due to its TS16949 screening level and -40 to 125 °C operating temperature range.
AD5142ABRUZ10-RL7
AD5142ABRUZ10-RL7 by Analog Devices is a 2-WIRE SERIAL Digital Potentiometer with 100k ohm resistance, 35 ppm/°C temp coefficient, and 256 positions. It operates in automotive grade applications with -40 to 125 °C temp range and offers precise voltage control in compact design for various electronic systems.
MCP4231-103E/SL
MCP4231-103E/SL by Microchip: 10kΩ DigiPOT with 257 positions, linear resistance law, and 150 ppm/°C temp coefficient. Ideal for automotive applications due to CMOS technology, 1 kHz bandwidth, and dual-terminal position control interface. Operating range from -40 to 125 °C with a compact small outline package.
AD5207BRU100-REEL7
AD5207BRU100-REEL7 by Analog Devices is a 3-wire serial digital potentiometer with 100k ohm total resistance, suitable for automotive applications. It features a linear resistance law, 256 positions, and operates b/w -40 to 125 °C. Ideal for precise voltage control in compact electronic systems.
MCP4161-502E/SN
MCP4161-502E/SN by Microchip is a 5000 ohm linear digital potentiometer with 129 positions. It operates at -40 to 125 °C, has a control interface for increment/decrement, and uses CMOS technology. Ideal for automotive applications, it features a max supply current of 1 mA and nominal bandwidth of 2 kHz.
MCP42100-E/P
MCP42100-E/P by Microchip Technology is a 3-WIRE SERIAL Digital Potentiometer with 100k ohm total resistance, 256 positions, and 20% resistance tolerance. It operates b/w -40 to 125 °C and has a bandwidth of 0.145 kHz. Ideal for automotive applications due to its TS16949 screening level and CMOS technology.
DS1855E-010+
Maxim Integrated
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
DS1267S-100+
DS1267S-100+ by Maxim Integrated is a 3-WIRE SERIAL digital potentiometer with 100k ohm resistance, 256 positions, and 20% tolerance. It operates at -40 to 85 °C for industrial applications, offering precise resistance control in compact small outline package.
MAX5419LETA-T
MAX5419LETA-T by Maxim Integrated is a 2-WIRE SERIAL digital potentiometer with 200k ohm total resistance, 35 ppm/°C temp coefficient, and 256 positions. Ideal for industrial applications requiring precise resistance adjustments in a compact square package.
CAT5241YI-00-T2
Onsemi
CAT5241YI-00-T2 by Onsemi is a 100kΩ linear digital potentiometer with 4 functions, controlled via 2-wire serial interface. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max resistor terminal voltage of 6V. Package style is small outline, thin profile, shrink pitch.
DS1868BE-010+
Analog Devices' DS1868BE-010+ is a 20-terminal digital potentiometer with linear resistance law, operating at 5V. It features a small outline package for industrial applications, with a temperature range of -40 to 85°C. Ideal for precise voltage control in electronic circuits.
AD5242BRUZ10
AD5242BRUZ10 by Analog Devices is a 2-function, 10kΩ digital potentiometer with 256 positions. It operates at -40 to 105°C, has a linear resistance law, and uses a 2-wire serial control interface. Ideal for applications requiring precise resistance adjustments in industrial settings.
X9C104SZT1
Intersil
DIGITAL POTENTIOMETER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AD5122BRUZ10
AD5122BRUZ10 by Analog Devices is a 2-function Digital Potentiometer with 100k ohm total resistance, controlled via 2-wire serial interface. Suitable for automotive applications, it operates b/w -40 to 125 °C with a temperature coefficient of 35 ppm/°C and offers a bandwidth of 3 kHz.
MCP4261-103E/ST
MCP4261-103E/ST by Microchip is a 10k ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has 257 positions for precise control. Ideal for automotive applications, it features a CMOS technology with 1 kHz bandwidth and increment/decrement control interface.
AD5110BCPZ10-1-RL7
AD5110BCPZ10-1-RL7 by Analog Devices is a 2-WIRE SERIAL digital potentiometer with 10000 ohm total resistance, 35 ppm/°C temp coefficient, and 128 positions. Ideal for automotive applications due to its -40 to 125 °C operating range and nickel palladium gold finish. Compact SQUARE package with very thin profile, suitable for surface mount designs.
MAX5465EXT+T
Analog Devices' MAX5465EXT+T is a 50kΩ linear digital potentiometer with 35 ppm/°C temp coefficient. It operates at -40 to 85°C, has 32 positions, and uses INCREMENT/DECREMENT control interface. Ideal for applications requiring precise resistance adjustments in compact designs.
MAX5482EUD
MAX5482EUD by Maxim Integrated is a 50k ohm digital potentiometer with linear resistance law. It operates on 3/5V supplies, has 1024 positions, and a temperature coefficient of 35 ppm/°C. Ideal for industrial applications requiring precise incremental/decremental control in compact designs.
TPL0401A-10DCKR
Texas Instruments
TPL0401A-10DCKR by Texas Instruments is a 2-WIRE SERIAL digital potentiometer with 10000 ohm resistance, suitable for automotive applications. It offers linear resistance law, 128 positions, and operates b/w -40 to 125 °C. Ideal for precise voltage control in compact designs with low power consumption.
DS1803Z-010
DS1803Z-010 by Maxim Integrated is a 2-function, 10kΩ linear digital potentiometer with 256 positions. It operates at -40 to 85°C, has a bandwidth of 1 kHz, and uses a 2-wire serial control interface. Ideal for industrial applications requiring precise resistance adjustments in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP41010-I/SN
MCP41010-I/SN by Microchip is a 3-WIRE SERIAL digital potentiometer with 10000 ohm resistance, 256 positions, and 20% tolerance. It operates at -40 to 85 °C and has a CMOS technology with 1 kHz bandwidth. Ideal for industrial applications requiring precise resistance adjustments in compact designs.
MCP4011-103E/SN
MCP4011-103E/SN by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C, has 64 positions, and uses INCREMENT/DECREMENT control interface. Ideal for automotive applications due to TS 16949 screening level and CMOS technology.
MCP4021-103E/SN
MCP4021-103E/SN by Microchip is a digital potentiometer with 10000 ohm resistance, 150 ppm/°C temp coefficient, and 1 kHz bandwidth. It is used in automotive applications for increment/decrement control interface, with 64 positions and small outline package style.
MCP40D18T-103E/LT
MCP40D18T-103E/LT by Microchip is a 2-WIRE SERIAL digital potentiometer with 10000 ohm resistance, suitable for automotive applications. It operates at -40 to 125 °C and has a max supply current of 0.08 mA. The device features a small outline package with 128 positions and is designed for precise voltage control in tight spaces.
MCP4651T-103E/ST
MCP4651T-103E/ST by Microchip is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, suitable for automotive applications. It operates at -40 to 125 °C and has a bandwidth of 2 kHz. With a compact design and low power consumption of 0.6 mA, it's ideal for space-constrained environments requiring precise resistance adjustments.
MCP41050-I/SN
MCP41050-I/SN by Microchip Tech is a 3-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 256 positions, and 20% tolerance. It operates at -40 to 85 °C for industrial applications, offering precise voltage control with 0.6 mA supply current.
MCP41HV51-103E/ST
MCP41HV51-103E/ST by Microchip is a 3-WIRE SERIAL digital potentiometer with 100k ohm resistance, 256 positions, and 20% tolerance. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage of 3V. Its compact design features a small outline package with dual terminals and matte tin finish.
MCP4021-502E/SN
DIGITAL POTENTIOMETER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MCP4017T-104E/LT
MCP4017T-104E/LT by Microchip is a 2-WIRE SERIAL digital potentiometer with 100000 ohm resistance, 128 positions, and 150 ppm/°C temperature coefficient. It is used in automotive applications due to its TS16949 screening level and -40 to 125 °C operating temperature range.
MCP40D19T-503E/LT
MCP40D19T-503E/LT by Microchip Technology is a digital potentiometer with a nominal total resistance of 50k ohm and a max resistor terminal voltage of 5.5V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
MCP40D18T-104E/LT
DIGITAL POTENTIOMETER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
MCP4131-103E/P
DIGITAL POTENTIOMETER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MCP42050-I/SL
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
MCP41HV51-104E/ST
MCP41HV51-104E/ST by Microchip is a 3-WIRE SERIAL digital potentiometer with 100000 ohm total resistance, 256 positions, and 20% resistance tolerance. It operates in automotive grade applications at -40 to 125 °C, with a supply voltage of 3 V and max current draw of 0.3 mA. Ideal for fine-tuning circuits in automotive electronics.
MCP4017T-503E/LT
MCP41HV51-503E/ST
MCP41HV51-503E/ST by Microchip is a 3-WIRE SERIAL digital potentiometer with 100000 ohm resistance, 256 positions, and 20% tolerance. It operates b/w -40 to 125 °C and has a max voltage of 18 V. Ideal for automotive applications due to its TS16949 screening level and small form factor.
MCP42010-I/SL
MCP42010-I/SL by Microchip is a 3-WIRE SERIAL digital potentiometer with 2 functions, 10000 ohm total resistance, and 256 positions. It operates at -40 to 85 °C for industrial applications, offering precise control with a linear resistance law and max voltage of 5 V.
MCP4011T-103E/MC
MCP4011T-103E/MC by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C, suitable for automotive applications. Features include 64 positions, 150 ppm/°C temp coefficient, and INCREMENT/DECREMENT control interface.
MCP4451-103E/ST
MCP4451-103E/ST by Microchip is a 2-WIRE SERIAL Digital Potentiometer with 100k ohm resistance, 4 functions, and 150 ppm/°C temperature coefficient. Ideal for automotive applications, it operates b/w -40 to 125 °C with a max supply current of 0.6 mA.
MCP45HV51-103E/ST
DIGITAL POTENTIOMETER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved