Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CAT4103V-GT2 by Onsemi is a graphics display driver with 16 terminals, operating voltage range of 3-5.5 V, and serial data input mode. Ideal for LED displays, it has a small outline package style, industrial temperature grade, and peak reflow temperature of 260°C.
Median Price
$1.152
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.110
1k+ parts
$0.921
10k+ parts
$0.821
DigiKey
$1.390
Verical
$1.027
Digiode
$0.864
Nova Conductors
$0.973
Chip Stock
Vyrian
DigiKey Marketplace
Bristol Electronics
Atlantic Semiconductor
Ampacity Inc.
$0.770
Semicontronic
$0.751
$0.747
Corphita
$0.819
Bastille Electronics
$0.924
$0.878
$0.866
Advanced Electronics
$4.221
$3.841
$3.461
Corohmni
$6.411
Aztec Data Supply Inc.
$13.830
Continental Prestige Electronics
Kulean Microsystems
Problanco Electronics
Kepictronics
SupplyDigital Components
Argo Parts USA
TANS Electronics
Glotronic Ltd.
Perfect Parts
UHIMA Technologies
Microchip USA
The plastic/epoxy material used in the package body makes the product lightweight and durable, ideal for applications where weight and longevity are important factors.
The serial data input mode allows for easy integration with microcontrollers and other digital systems, making it convenient to use in various electronic projects.
The high maximum supply voltage ensures compatibility with a wide range of power sources, giving flexibility in the design and implementation of the product.
The surface mount capability simplifies the assembly process and saves space on the PCB, making it easier to integrate into compact designs.
The wide operating temperature range allows the product to function reliably in harsh environments with extreme temperatures, ensuring consistent performance under varying conditions.
The nominal supply voltage of 5V is a standard power requirement in many electronic systems, making it a versatile choice for a wide range of applications.
Graphics Display Drivers CAT4103V-GT2 attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Data Input Mode:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Minimum fmax:
CAT4103V-GT2 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 27/Jun/2014
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Electronic Devices
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
TCA6424ARGJR
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
MMBF170LT1G
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
FAN5333ASX
FAN5333ASX by Onsemi is a LED display driver with 5.5V max supply voltage, 1.8V min supply voltage, and -40 to 85°C operating temperature range. It is ideal for industrial applications requiring small outline, low profile package style with shrink pitch terminals.
LT3797EUKG#TRPBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 52; Package Code: HVQCCN; Package Shape: RECTANGULAR;
TLC5928PWPR
TLC5928PWPR by Texas Instruments is a graphics display driver with 24 terminals, operating voltage of 3-5.5V, and serial data input mode. Ideal for LED displays, it has a small outline package style and can handle temperatures from -40 to 85°C.
TLC5940PWP
TLC5940PWP by Texas Instruments is a graphics display driver with 16 channels, operating at 30 MHz. It features a serial data input mode and open-drain output characteristics. Ideal for LED displays, it supports dot matrix display mode and has a max supply voltage of 5.5 V.
HV7620PG-G
AC PLASMA DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: QFP; Package Shape: RECTANGULAR;
LP5012PWR
LP5012PWR by Texas Instruments is a 12-channel LED display driver with serial data input mode. It operates b/w -40 to 85°C, with a supply voltage range of 2.7-5.5V. Ideal for industrial applications requiring low profile and small outline package styles.
MAX16834AUP+T
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM3407MYX/NOPB
LM3407MYX/NOPB by Texas Instruments is a graphics display driver with a supply voltage range of 4.5V to 30V, ideal for automotive applications. It offers constant-current output, operates b/w -40°C to 125°C, and has a small outline package style. This LED display driver features dual terminal position and matte tin finish in a square package shape.
LP5030RJVR
LP5030RJVR by Texas Instruments is a SERIAL graphics display driver with 30 channels and segments. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 2.7V to 5.5V, it offers a max frequency of 0.4 MHz for LED displays.
MAX7221EWG+
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
MAX6963ATH+
MAX6963ATH+ by Maxim Integrated is a Graphics Display Driver with DOT MATRIX mode and SERIAL data input. It operates at 2.7-3.6V, has 44 terminals in a square package, and supports multiplexed displays. Ideal for automotive applications due to its BICMOS technology and LED display driver interface.
AL5890-20Y-13
Diodes Incorporated
Diodes Inc.'s AL5890-20Y-13 is a Graphics Display Driver with 3 terminals, operating b/w -40 to 105°C. It supports a supply voltage range of 7-400V and has a max current of 40mA. Ideal for LED display driver applications due to its small outline package and standard input characteristics.
LM3914VX
LM3914VX by Texas Instruments is a LED display driver with 10-digit segments. It operates b/w 3-20 V, suitable for bar graph displays in commercial applications. This chip carrier package has 20 terminals, measures 8.89mm x 8.89mm, and uses parallel data input mode for easy integration.
TLD2310ELXUMA1
Infineon Technologies
TLD2310ELXUMA1 by Infineon Technologies is a LED display driver with 14 terminals and a max supply voltage of 40V. It features a small outline package style, suitable for graphics display applications. With AEC-Q100 screening level, this IC has a low profile design and is surface mountable.
CAP1166-1-BP-TR
Standard Microsystems
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HQCCN; Package Shape: SQUARE;
HV9910BLG-G
Microchip Technology
HV9910BLG-G by Microchip Technology is a LED display driver with 8 terminals and a supply voltage range of 8-15V. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various graphics display applications. The package style is small outline with a rectangular shape, designed for surface mount assembly.
TPS92515HVDGQT
TPS92515HVDGQT by Texas Instruments is a LED display driver with 10 terminals, operating voltage range of 5.5V to 65V, and temperature grade suitable for automotive applications. It features a small outline package style with heat sink, dual terminal position, and moisture sensitivity level of 2.
TPS92640PWPT/NOPB
TPS92640PWPT/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 85V and power supplies of 24V. It operates in automotive-grade temperatures from -40 to 125°C, providing constant-current output for LED displays. With a small outline package style and dual terminal position, it's ideal for various automotive lighting applications.
MAX16834AUP/V+
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR;
PCA9685PW_Q900
NXP Semiconductors
PCA9685PW_Q900 by NXP Semiconductors is a Graphics Display Driver with SERIAL data input mode, 16 segments, and 1 MHz min fmax. Ideal for LED display driver applications due to its compact SMALL OUTLINE package style and industrial temperature grade suitability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CAT4238TD-GT3
CAT4238TD-GT3 by Onsemi is a 5-terminal LED display driver with a supply voltage range of 3-3.6V, suitable for industrial applications. It features a small outline package with very thin profile and shrink pitch, making it ideal for graphics display drivers. With an operating temperature range of -40 to 85°C and terminal finish in nickel palladium gold, this IC offers reliable performance in various environments.
Catalyst Semiconductor
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
CAT4237TD-GT3
CAT4237TD-GT3 by Onsemi is a Graphics Display Driver with 5.5V max supply voltage, 2.8V min supply voltage, and 85°C max operating temp. Ideal for LED display driver applications due to its compact size, CMOS technology, and industrial temperature grade suitability.
CAT4139TD-GT3
CAT4139TD-GT3 by Onsemi is a SERIAL LED DISPLAY DRIVER with 5.5V max supply voltage, 3.6V nominal voltage, and -40 to 85°C operating temperature range. Ideal for industrial applications requiring small outline, thin profile packages in graphics display drivers.
CAT4016Y-T2
CAT4016Y-T2 by Onsemi is a graphics display driver with 16 segments. It operates at 3-5.5V, -40 to 85°C, and has a max fmax of 25MHz. Ideal for LED displays, it features a small outline package with dual terminals and matte tin finish.
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
CAT4137TD-GT3
CAT4137TD-GT3 by Onsemi is a LED display driver with 5 terminals, operating voltage range of 2.2V to 5.5V, and industrial temperature grade up to 85°C. It features small outline package style suitable for graphics applications requiring compact design and high reliability in harsh environments.
CAT4104VP2-GT3
CAT4104VP2-GT3 by Onsemi is a LED display driver with 8 terminals, operating voltage range of 3-5.5V, and industrial temperature grade. Its small outline package makes it suitable for graphics displays in various applications. With dual terminal position and nickel/palladium/gold finish, it ensures reliable performance at temperatures from -40 to 85°C.
CAT4004AHU2-GT3
CAT4004AHU2-GT3 by Onsemi is a LED display driver with 8 terminals, operating voltage range of 2.4V to 5.5V, and industrial temperature grade up to 85°C. It comes in a small outline package suitable for graphics applications requiring precise control over multiple segments.
CAT4104V-GT3
CAT4104V-GT3 by Onsemi is a LED display driver with 4 segments, operating at 3-5.5 V. Its small outline package and dual terminal position make it suitable for industrial applications requiring temperatures from -40 to 85°C. With a compact size of 4.9mm x 3.9mm x 1.75mm, it's ideal for graphics display drivers in various electronic devices.
CAT4109V-GT2
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CAT4101TV-T75
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Shape: RECTANGULAR; Terminal Pitch: 1.7 mm;
CAT4003BTD-GT3
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
CAT4201TD-GT3
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
CAT4134HV2-GT2
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE;
CAT4008Y-T2
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved