Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CAT4137TD-GT3 by Onsemi is a LED display driver with 5 terminals, operating voltage range of 2.2V to 5.5V, and industrial temperature grade up to 85°C. It features small outline package style suitable for graphics applications requiring compact design and high reliability in harsh environments.
Median Price
$0.603
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.609
100+ parts
1k+ parts
10k+ parts
-
Verical
$0.598
Digiode
$0.579
Nova Conductors
$1.000
Chip Stock
TME
$0.527
Vyrian
Semicontronic
$0.510
$0.497
$0.495
Corphita
$0.548
Argo Parts USA
$0.597
Continental Prestige Electronics
$0.585
Corohmni
Advanced Electronics
Netroflash
$0.950
$0.930
Microchip USA
$3.556
Aztec Data Supply Inc.
$14.535
AZTECH Wire
$16.570
$15.910
$15.600
$15.280
Perfect Parts
Metaverse IC Inc.
Kepictronics
RC Electronics
$0.610
$0.560
$0.540
iodParts Technologies Inc.
Andel Nordic
Glotronic Ltd.
Lixinc
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
TANS Electronics
A-Z Elektronik GmbH
Alle Elektronik GmbH
Assy Fe
UHIMA Technologies
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
This material provides durability and protection for the graphics display driver, ensuring a longer lifespan.
Surface mount capability allows for easy and efficient installation on circuit boards, saving time and effort during assembly.
The high maximum supply voltage allows for compatibility with various power sources and ensures stable performance under different operating conditions.
The low minimum supply voltage ensures energy efficiency and flexibility in power options for the graphics display driver.
The high maximum operating temperature allows the graphics display driver to function reliably in industrial environments with elevated temperatures.
The low minimum operating temperature ensures the graphics display driver can operate in cold environments without risk of malfunction.
This finish provides excellent conductivity, corrosion resistance, and reliability for the terminal connections, improving the overall performance of the graphics display driver.
The CMOS technology offers low power consumption, fast switching speeds, and high noise immunity, enhancing the efficiency and reliability of the graphics display driver.
Graphics Display Drivers CAT4137TD-GT3 attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
CAT4137TD-GT3 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Mult Dev Pkg Chgs 16/Nov/2020 Mult Dev Reel Chg `6/Dec/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Meritek Electronics
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Eic Semiconductor
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
LM3915N-1/NOPB
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
LP8556TME-E05/NOPB
LP8556TME-E05/NOPB by Texas Instruments is a Graphics Display Driver with 12V power supply, 6 channels, and 12 segments. It operates b/w -30 to 85°C, has a terminal pitch of 0.4mm, and uses serial data input mode. Ideal for LED display driver applications due to its thin profile and fine pitch package style.
ZXLD1362ET5TA
Diodes Incorporated
ZXLD1362ET5TA by Diodes Inc. is a Graphics Display Driver with 24V power supply, 60V max supply voltage, and 0.625 MHz min fmax. Ideal for automotive applications due to AEC-Q100 screening level and compact design suitable for LED display drivers.
ICM7211AIPL
Rochester Electronics
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Shape: RECTANGULAR; No. of Digits/Characters: 4-DIGIT;
RT9367CGQW
Richtek Technology
LED DISPLAY DRIVER;
LM3409MY/NOPB
LM3409MY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. It operates in automotive-grade temperatures from -40 to 125°C, making it ideal for LED display driver applications. This small outline package has 10 terminals and is surface-mountable for compact designs.
ZXLD1371EST16TC
ZXLD1371EST16TC by Diodes Inc. is a graphics display driver with a max supply voltage of 60V and power supplies of 12V. It is used as an LED display driver in automotive applications.
LT3518IUF#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
LM3409QHVMY/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
LT3797ILXE#PBF
Analog Devices
LT3797ILXE#PBF by Analog Devices is a LED display driver with 48 terminals, operating voltage range of 2.5V to 40V, and automotive temperature grade up to 125°C. Ideal for graphics displays, it features a compact square package style suitable for surface mount applications in various electronic devices.
AL5809-150P1-7
Diodes Inc.'s AL5809-150P1-7 is a LED display driver with 2 segments. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 2.5V to 60V, it's designed for graphics displays in compact form factors.
LM3915N-1/NOPB by Texas Instruments is a LED display driver with 10-digit segments. It operates b/w 3V to 25V, suitable for bar graph displays in commercial applications. This rectangular package has 18 terminals and operates at temperatures from 0°C to 70°C.
LT3475EFE-1#TRPBF
Analog Devices' LT3475EFE-1#TRPBF is a LED display driver with 2 functions, operating at -40 to 85°C. It has a supply voltage range of 4-36V and comes in a small outline package suitable for industrial applications. The terminal finish is matte tin, and it features gull wing terminals with a pitch of 0.65mm.
PCA9532PW,112
NXP Semiconductors
NXP Semiconductors' PCA9532PW,112 is a SERIAL LED DISPLAY DRIVER with 16 segments. It operates b/w -40 to 85 °C and supports supply voltages of 2.3-5.5 V, making it ideal for industrial applications requiring precise graphics display control.
PCA9632DP2Z
PCA9632DP2Z by NXP Semiconductors is a LED display driver with 10 terminals, operating voltage range of 2.3V to 5.5V, and serial data input mode. It has a small outline package style suitable for graphics displays applications, with standard input characteristics and max frequency of 1MHz.
LM3914V/NOPB
LM3914V/NOPB by Texas Instruments is a LED display driver with 10 channels and segments. It operates at 3-20 V, with constant-current output and analog data input mode. Ideal for bar graph displays in commercial applications, it comes in a square chip carrier package with 20 terminals.
IS31FL3731-SALS2-TR
Integrated Silicon Solution
IS31FL3731-SALS2-TR by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with SERIAL data input mode. It operates b/w -40 to 85 °C and has 144 segments, suitable for industrial applications requiring high-quality graphics display drivers. The package style is SMALL OUTLINE, SHRINK PITCH with GULL WING terminals, making it ideal for compact designs.
TPS61160ADRVR
TPS61160ADRVR by Texas Instruments is a LED display driver with 10 segments, operating voltage range of 2.7V to 18V, and industrial temperature grade. It comes in a small outline package with dual terminals suitable for graphics display applications requiring high efficiency and low power consumption.
MAX7219ENG+
Maxim Integrated
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
TLC5916IPW
TLC5916IPW by Texas Instruments is a graphics display driver with 16 terminals, operating at -40 to 125 °C. It features constant-current output, serial data input mode, and supports segment display mode. Ideal for automotive applications due to its small outline package style and nickel palladium gold terminal finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CAT4238TD-GT3
Onsemi
CAT4238TD-GT3 by Onsemi is a 5-terminal LED display driver with a supply voltage range of 3-3.6V, suitable for industrial applications. It features a small outline package with very thin profile and shrink pitch, making it ideal for graphics display drivers. With an operating temperature range of -40 to 85°C and terminal finish in nickel palladium gold, this IC offers reliable performance in various environments.
Catalyst Semiconductor
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
CAT4237TD-GT3
CAT4237TD-GT3 by Onsemi is a Graphics Display Driver with 5.5V max supply voltage, 2.8V min supply voltage, and 85°C max operating temp. Ideal for LED display driver applications due to its compact size, CMOS technology, and industrial temperature grade suitability.
CAT4139TD-GT3
CAT4139TD-GT3 by Onsemi is a SERIAL LED DISPLAY DRIVER with 5.5V max supply voltage, 3.6V nominal voltage, and -40 to 85°C operating temperature range. Ideal for industrial applications requiring small outline, thin profile packages in graphics display drivers.
CAT4016Y-T2
CAT4016Y-T2 by Onsemi is a graphics display driver with 16 segments. It operates at 3-5.5V, -40 to 85°C, and has a max fmax of 25MHz. Ideal for LED displays, it features a small outline package with dual terminals and matte tin finish.
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
CAT4137TD-GT3
CAT4104VP2-GT3
CAT4104VP2-GT3 by Onsemi is a LED display driver with 8 terminals, operating voltage range of 3-5.5V, and industrial temperature grade. Its small outline package makes it suitable for graphics displays in various applications. With dual terminal position and nickel/palladium/gold finish, it ensures reliable performance at temperatures from -40 to 85°C.
CAT4004AHU2-GT3
CAT4004AHU2-GT3 by Onsemi is a LED display driver with 8 terminals, operating voltage range of 2.4V to 5.5V, and industrial temperature grade up to 85°C. It comes in a small outline package suitable for graphics applications requiring precise control over multiple segments.
CAT4104V-GT3
CAT4104V-GT3 by Onsemi is a LED display driver with 4 segments, operating at 3-5.5 V. Its small outline package and dual terminal position make it suitable for industrial applications requiring temperatures from -40 to 85°C. With a compact size of 4.9mm x 3.9mm x 1.75mm, it's ideal for graphics display drivers in various electronic devices.
CAT4103V-GT2
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CAT4109V-GT2
CAT4101TV-T75
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Shape: RECTANGULAR; Terminal Pitch: 1.7 mm;
CAT4003BTD-GT3
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
CAT4201TD-GT3
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
CAT4134HV2-GT2
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE;
CAT4137TD
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved