Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
4N25SR2M by Onsemi is a SINGLE optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 7500V. Ideal for applications requiring transistor output optocouplers in surface mount configurations.
Median Price
$0.382
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Farnell
1+ parts
$0.475
100+ parts
$0.238
1k+ parts
$0.184
10k+ parts
$0.158
Future Electronics
$0.605
$0.465
$0.365
-
Adafruit Industries
$0.650
$0.592
$0.533
Newark
$0.696
$0.357
$0.343
$0.328
Mouser Electronics
$0.740
$0.373
$0.284
Element14
$1.010
$0.516
$0.506
Rochester
$0.264
$0.220
$0.196
Verical
$0.245
Flip Electronics (Authorized)
DigiKey
$0.287
$0.270
Arrow
$0.290
$0.273
Master Electronics
$0.274
$0.261
Chip1Stop
$0.176
$0.159
Freelance Electronics
$0.139
$0.145
$0.137
Digiode
Nova Conductors
$0.242
Maritex
$0.584
$0.324
$0.276
IBS Electronics
$0.853
$0.217
NAC Semi
$0.278
Chip Stock
Vyrian
ComSIT Distribution GmbH
ComSIT USA
Mil-Aero Solutions, Inc.
ACDS - Activité Composants Distribution Service
Bristol Electronics
Atlantic Semiconductor
Flip Electronics
Semi Source
VNN
Connector Distribution Corp
Right Parts Inc.
TME
$0.240
$0.210
LIBRA Elektronik GmbH
Ashlea Components Ltd
Connect4Technologies Inc.
Prism Electronics
Electronics Depot
Corohmni
Semicontronic
$0.143
Ampacity Inc.
Corphita
$0.185
Aztec Data Supply Inc.
$0.199
Component Stockers USA
$0.200
$0.190
$0.170
Modulus Dynamics
$0.201
Argo Parts USA
$0.239
$0.232
Netroflash
Advanced Electronics
Continental Prestige Electronics
$0.667
$0.255
$0.179
$0.162
Metaverse IC Inc.
Authorized Procurement Solutions
Perfect Parts
Kepictronics
A-Z Elektronik GmbH
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
Problanco Electronics
Cyclops Electronics Ltd (Excess)
SupplyDigital Components
Eastek
$0.265
GreenTree Electronics
Infinite Electronics LLP (Excess)
Lixinc
TANS Electronics
Supply Digital
Futuretech Components
UHIMA Technologies
Robosynatics
$3.255
Lucentia Tech
Single configuration makes it easy to install and use in various electronic circuits.
Capable of handling higher current loads efficiently, providing reliable performance.
Transistor output optocoupler offers improved signal amplification and isolation capabilities.
Suitable for use in various temperature environments without risk of overheating.
Can operate efficiently even in low-temperature conditions.
Tin terminal finish provides good conductivity and solderability for easy installation.
Efficient power dissipation helps prevent overheating and ensures product longevity.
Provides reliable signal transfer with minimal loss, ensuring accurate data transmission.
Low dark current helps maintain signal integrity in low-light conditions.
High breakdown voltage protects the device during voltage surges, ensuring longevity.
Consistent current transfer ratio ensures reliable performance in various applications.
High isolation voltage protects sensitive components from voltage spikes, enhancing safety.
Surface mount design makes it easy to integrate into compact electronic devices and PCBs.
Low forward voltage drop minimizes power loss and improves energy efficiency.
Optocoupler Transistor Outputs 4N25SR2M attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
4N25SR2M Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
EU2B-YS3203F
Idec
ROTARY SWITCH;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
4N32M
Everlight Electronics
DARLINGTON OUTPUT OPTOCOUPLER; Terminal Finish: NOT SPECIFIED; Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED; Maximum Dark Current: 100 nA; Maximum Forward Current: .06 A;
HMHA2801AR2
The Onsemi HMHA2801AR2 is a SINGLE Optocoupler Transistor Output with a Max Forward Current of 0.05A and Min C-E Breakdown Voltage of 80V. Ideal for applications requiring high isolation voltage up to 3750V, such as industrial control systems and power supplies.
TLP292-4(GB-TP,E
Toshiba
Toshiba's TLP292-4(GB-TP,E is a 4-channel optocoupler with AC input-transistor output. It has a max forward current of 0.05A, min transfer ratio of 100%, and max isolation voltage of 3750V. Ideal for applications requiring high isolation voltage and reliable signal transmission in temperature range -55 to 125°C.
HCPL-817-300E
Broadcom
Broadcom's HCPL-817-300E is a SINGLE optocoupler with max. forward current of 0.05A, ideal for applications requiring transistor output optocouplers. It offers a min. operating temp of -30°C and max. isolation voltage of 5000V, making it suitable for high-power circuits in various industries. With a response time of 0.000018s and matte tin terminal finish, this device ensures efficient performance and reliability in surface mount installations.
FOD817B300
FOD817B300 by Onsemi is a single optocoupler with max forward current of 0.05A, operating temp range -55 to 110°C, and isolation voltage of 5000V. Ideal for applications requiring transistor output optocouplers like motor control systems due to its fast response time of 18µs.
TLP293-4(E(T
Toshiba's TLP293-4(E(T optocoupler features 4 separate channels with a max forward current of 0.05A. With a min transfer ratio of 50%, it offers high isolation voltage of 3750V, making it ideal for applications requiring reliable signal transmission in harsh environments.
TCMT1100
Vishay Intertechnology
Vishay Intertechnology's TCMT1100 is a single optocoupler with a max forward current of 0.06A and operating temperature range from -40°C to 100°C. With a min C-E breakdown voltage of 70V, it offers high isolation at 3750V making it ideal for surface mount applications requiring reliable signal transfer in harsh environments.
PS2501L-1-F3-A
PS2501L-1-F3-A by Renesas Electronics is a SINGLE optocoupler with max. forward current of 0.08A, operating temp. range -55 to 100°C, and isolation voltage of 5000V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and nominal current transfer ratio of 300%.
SFH6186-4T
Vishay Intertechnology SFH6186-4T is a single optocoupler with max. forward current of 0.05A, operating temp. range -55 to 100°C, and isolation voltage of 5300V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer in harsh environments.
LTV-817S-TA1-D
Lite-on Technology
LTV-817S-TA1-D by Lite-on Technology is a single optocoupler with max forward current of 0.05 A, operating temp range -30 to 110 °C. It features transistor output, min current transfer ratio of 300%, and max isolation voltage of 5000 V. Ideal for applications requiring high isolation and signal transmission efficiency in electronic circuits.
SFH6156-2
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: UL APPROVED; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A;
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: MATTE TIN; Maximum Dark Current: 200 nA; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e3;
TLP291-4(V4-GB-TP,E
Toshiba TLP291-4(V4-GB-TP,E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 2500V, such as in industrial automation and power management systems.
SFH6186-2T
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 55 V; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .05 A; Maximum Operating Temperature: 100 Cel;
TLP181(F)
Toshiba's TLP181(F) optocoupler has a max forward current of 0.05A, isolation voltage of 3750V, and operates b/w -55°C to 110°C. Ideal for surface mount applications, it offers a min CTR of 50% and max power dissipation of 0.15W.
FOD817CSD
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum Response Time: .000018 s; Maximum Dark Current: 100 nA;
TLP185(GB-TPL,SE(T
Toshiba's TLP185(GB-TPL,SE(T optocoupler features a single transistor output with max. forward current of 0.05A and min. CTR of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature in temp range -55 to 110°C.
SFH6156-3-X001
SFH6156-3-X001 by Infineon is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 5300V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio of 100%.
CNY17-3
Isocom Components
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum Forward Current: .06 A; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V;
4N27
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Isolation Voltage: 1500 V; No. of Elements: 1; Minimum Operating Temperature: -55 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
4N25
Ct Micro International
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5000 V; Additional Features: UL APPROVED, VDE APPROVED; Maximum Operating Temperature: 110 Cel; Configuration: SINGLE;
Motorola
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A; Configuration: SINGLE; JESD-609 Code: e0;
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 2500 V; Maximum Forward Current: .08 A; Minimum Collector-emitter Breakdown Voltage: 30 V; No. of Elements: 1;
Three-five Systems
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; JESD-609 Code: e0; Maximum Forward Voltage: 1.5 V;
General Instrument Optoelectronics
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; No. of Elements: 1; JESD-609 Code: e3;
Qt Optoelectronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel; Maximum Dark Current: 50 nA; Maximum Isolation Voltage: 5300 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Additional Features: UL RECOGNIZED;
North American Philips Discrete Products Div
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Response Time: .0000028 s; JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel;
Tt Electronics Plc
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Additional Features: UL RECOGNIZED; Maximum Power Dissipation: .15 W;
Harris Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Forward Current: .08 A; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 20 %;
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5300 V; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 30 V; No. of Elements: 1;
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .06 A; JESD-609 Code: e0; Maximum Response Time: .0000028 s;
General Electric Solid State
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.5 V; Maximum Response Time: .0000028 s; Maximum On State Current: .15 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Nominal Current Transfer Ratio: 20 %; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel;
4N25 by Texas Instruments is a single optocoupler with max forward current of 0.08A, dark current of 50nA, and min collector-emitter breakdown voltage of 30V. It has a nominal transfer ratio of 50% and isolation voltage up to 2500V. Ideal for applications requiring high isolation and signal transmission efficiency in electronic circuits.
Dpac Technologies
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 7500 V; JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 50 nA; Configuration: SINGLE; Maximum Forward Current: .08 A;
Intersil
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 1.5 V; Maximum Response Time: .0000028 s; Maximum Forward Current: .06 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5300 V; JESD-609 Code: e3; Maximum Forward Current: .1 A;
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 2500 V; No. of Elements: 1; Maximum Operating Temperature: 100 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved