Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Additional Features: LOW PROFILE;
Median Price
$0.700
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Verical
1+ parts
$0.580
100+ parts
1k+ parts
$0.570
10k+ parts
$0.540
DigiKey
$0.760
$0.508
-
$0.610
PEI Genesis
Master Electronics
$0.847
$0.622
$0.569
Chip1Stop
$0.641
$0.573
IBS Electronics
$0.575
$0.537
TME
$0.647
$0.614
Andel Nordic
$113.750
$79.625
Kepictronics
Assy Fe
Headers & Edge Type Connectors XF2W-0715-1A attributes and parameters. Explore more Headers & Edge Type Connectors devices from Omron
Additional Features:
Body Width:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
XF2W-0715-1A Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Multiple Series Dec/2017
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Taiwan Semiconductor
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
851-43-030-30-002000
Mill-max Mfg
The Mill-max Mfg 851-43-030-30-002000 is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 1.27mm and is designed for SURFACE MOUNT applications. Ideal for use in electronic devices requiring FEMALE SOCKET connectors on PCBs.
SM04B-SRSS-TB(LF)(SN)(P)
J S T Mfg
SM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a 2-row BOARD CONNECTOR with 0.039" pitch, 1A signal current, and 100M ohm insulation resistance. Ideal for board mounting applications requiring a male contact gender, POLYAMIDE insulator material, and operating temperatures from -25 to 85°C.
B4P-VH-FB-B(LF)(SN)
B4P-VH-FB-B(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.156" mating contact pitch, 0.698" body length, and 0.382" body width. It features tin (Sn) termination contact finish and glass-filled polybutylene terephthalate insulator material. Ideal for applications requiring a male straight mounting style connector with solder termination type.
640456-3
TE Connectivity
TE Connectivity 640456-3 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. Featuring TIN termination finish, it has a rated current of 5A and operates b/w -55 to 105°C. Ideal for use in electronics requiring a male contact gender with straight mounting style.
B8B-PH-K(LF)(SN)
B8B-PH-K(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 2A signal current rating, and 800VAC dielectric voltage. Ideal for applications requiring a male SQ PIN-SKT contact style, such as PCB connections in electronics with operating temperatures ranging from -25 to 85 °C.
SHR-02V-S-B
SHR-02V-S-B by J S T Mfg is a BOARD CONNECTOR with 2 FEMALE contacts. It has UL 94V-0 flammability rating, suitable for CABLE mounting with CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
851-43-025-10-002000
851-43-025-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, TIN finish. It has a terminal pitch of 1.27mm and uses SOLDER termination. Ideal for applications requiring FEMALE SOCKET connectors in STRAIGHT mounting style.
1-1473005-4
TE Connectivity 1-1473005-4 is a CARD EDGE CONNECTOR with 200 contacts, 0.024" pitch, and 50000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings due to its durability, right angle mounting style, and female contact gender.
FTSH-107-01-L-DV-K-P-TR
Samtec
Samtec FTSH-107-01-L-DV-K-P-TR is a 14-contact board connector with 0.05" pitch, ideal for commercial applications. Features include liquid crystal polymer insulator, phosphor bronze contact material, and gold mating finish over nickel. With a temperature range of -55 to 125°C, it offers reliable signal current up to 3.3A.
SM02B-SRSS-TB(LF)(SN)
SM02B-SRSS-TB(LF)(SN) by J S T Mfg is a 2-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male contacts, surface mount termination, and right-angle mounting.
DF40C-90DS-0.4V(51)
Hirose Electric
DF40C-90DS-0.4V(51) by Hirose Electric is a 90-contact board stacking connector with gold termination, liquid crystal polymer insulator, and phosphor bronze contacts. It has a mating pitch of 0.016", withstands 100VAC, and operates b/w -35 to 85°C. Ideal for PCB applications requiring high durability and reliability in commercial settings.
35362-0350
Molex
Molex 35362-0350 is a board connector with 3 contacts, featuring a mating contact pitch of 0.079" and body dimensions of 0.382" x 0.217" x 0.335". It uses TIN over copper termination for reliability in commercial applications.
B2P-VH-BK(LF)(SN)
B2P-VH-BK(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 10A signal current, and POLYAMIDE66 insulator. It has a dielectric voltage of 1500VAC and operates b/w -25 to 85°C. Ideal for PCB applications requiring a polarized housing with male SQ PIN-SKT contacts.
43645-0300
The Molex 43645-0300 is a board connector with a mating contact pitch of 0.118". It has a body length of 0.388" and insulation resistance of 1,000,000,000 ohm. This connector is commonly used in commercial applications and has a max operating temperature of 105°C.
B3P-VH-FB-B(LF)(SN)
B3P-VH-FB-B(LF)(SN) by J S T Mfg is a 3-contact board connector with 0.156" pitch, ideal for applications requiring straight mounting. Featuring tin over copper finish and brass contacts, it has a body size of 0.535" x 0.382" x 0.433". The UL 94V-0 rated connector uses solder termination and glass-filled polybutylene terephthalate insulator material.
51021-0700
The Molex 51021-0700 is a board connector with 7 contacts, 0.049" pitch, and 0.413" body length. It has an insulation resistance of 100M ohm and operates b/w -40°C to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
71918-120LF
Amphenol Communications Solutions
71918-120LF by Amphenol is a 20-contact board connector with 0.1" mating contact pitch, suitable for commercial applications. Featuring a 2-row PCB layout and UL-rated insulation material, it offers a rated current of 3A and operates b/w -65°C to 125°C temperature range.
BM04B-SRSS-TB(LF)(SN)(P)
BM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, COPPER ALLOY material, and TIN finish. It is used for surface mount applications in headers & edge type connectors. The connector has UL Flammability Code of 94V-0 and mating contact finish of TIN OVER COPPER.
B10B-PHDSS(LF)(SN)
B10B-PHDSS(LF)(SN) by J S T Mfg is a 2-row BOARD CONNECTOR with 10 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 800VAC, it is ideal for applications requiring reliable board-to-board connections in electronics.
61000418221
Wuerth Elektronik & Kg
61000418221 by Wurth Elektronik is a 4-contact board connector with 0.1" pitch, gold over nickel finish, and polyamide insulator. It operates b/w -40 to 125°C, has a dielectric voltage of 500VAC, and offers an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable signal transmission in black insulator color.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XF2W-5015-1AE
Omron
Omron XF2W-5015-1AE is a FFC/FPC connector with 50 contacts and a mating contact pitch of 0.020". It has a durability of 20 cycles and can withstand temperatures from -30 to 85°C. This connector is commonly used in commercial applications requiring surface mount termination.
XF2W-0615-1A
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Total No. of Contacts: 6;
XF2W-1815-1A
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; UL Flammability Code: 94V-0;
XF2W-0915-1A
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Mounting Type: BOARD;
XF2W-1615-1A
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Maximum Operating Temperature (Cel): 85;
XF2W-0815-1A
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Filter Feature: NO;
XF2W-1815-1A-R100
FFC/FPC CONNECTOR; Contact Material: COPPER ALLOY; JESD-609 Code: e4; Mating Contact Finish: GOLD (6) OVER NICKEL (79); Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier;
XF2W-0415-1A-R100
FFC/FPC CONNECTOR; Mating Contact Finish: GOLD (6) OVER NICKEL (79); Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Contact Material: COPPER ALLOY; JESD-609 Code: e4;
XF2W-0615-1A-R100
FFC/FPC CONNECTOR; Contact Material: COPPER ALLOY; JESD-609 Code: e4; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Mating Contact Finish: GOLD (6) OVER NICKEL (79);
XF2W-0915-1A-R100
FFC/FPC CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: GOLD (6) OVER NICKEL (79); Contact Material: COPPER ALLOY; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier;
XF2W-1015-1A
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 250VAC; Body Width: .043 inch; Mounting Option-1: LOCKING; Contact Material: COPPER ALLOY;
XF2W-1415-1A-R100
FFC/FPC CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: GOLD (6) OVER NICKEL (79); Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Contact Material: COPPER ALLOY;
XF2W-0715-1A-R100
FFC/FPC CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Contact Material: COPPER ALLOY; Mating Contact Finish: GOLD (6) OVER NICKEL (79);
XF2W-1615-1A-R100
FFC/FPC CONNECTOR; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; Mating Contact Finish: GOLD (6) OVER NICKEL (79); Contact Material: COPPER ALLOY; JESD-609 Code: e4;
XF2W-0515-1A-R100
XF2W-1015-1A-R100
FFC/FPC CONNECTOR; Contact Material: COPPER ALLOY; Mating Contact Finish: GOLD (6) OVER NICKEL (79); JESD-609 Code: e4; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier;
XF2W-0815-1A-R100
XF2W-0415-1A
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 250VAC; Reference Standard: UL; Total No. of Contacts: 4; Maximum Operating Temperature (Cel): 85;
XF2W-0515-1A
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; PCB Contact Pattern: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved