Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRANSISTOR OUTPUT SSR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
Solid State Relays G3TA-IAZR02S-US attributes and parameters. Explore more Solid State Relays devices from Omron
Optoelectronic Type:
G3TA-IAZR02S-US Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.95.00
SB
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Eic Semiconductor
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
AQV252
Panasonic
Panasonic AQV252 is a solid state relay with max. forward current of 0.05A, optoelectronic transistor output SSR type, and max. operating temp of 85°C. Ideal for applications requiring low on-state resistance (1.4Ω), high isolation voltage (1500V), and max. on-state current of 0.4A in temperatures ranging from -40°C to 85°C packed in tubes.
AQY280S
The Panasonic AQY280S is a single solid state relay with a max forward current of 0.05A and on-state resistance of 25 ohm. It features a transistor output SSR optoelectronic type, operates b/w -40 to 85°C, and offers an isolation voltage of 1500V. Ideal for applications requiring precise switching in industrial automation systems.
D1D40
Crydom
The Crydom D1D40 is a SINGLE Solid State Relay with a control current of 0.0016 A and max on state current of 40 A. Featuring MOSFET output circuit type, it operates b/w -20 to 80 °C, making it ideal for DC input applications requiring high isolation voltage up to 2500 V.
D2450
Hbcontrols
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; No. of Elements: 1; Maximum Isolation Voltage: 4000 V; Maximum Forward Current: .012 A; Length: 57.3 mm;
LH1501BABTR
Vishay Semiconductors
TRANSISTOR OUTPUT SSR; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .2 A; Configuration: SINGLE; Additional Features: UL RECOGNIZED; Maximum On State Resistance: 25 ohm;
CPC1390GR
Littelfuse
CPC1390GR by Littelfuse is a SINGLE solid state relay with TRANSISTOR OUTPUT SSR. It has a max forward current of 0.05A, on-state resistance of 22 ohm, and isolation voltage of 5000V. Ideal for applications requiring reliable switching in temperatures ranging from -40 to 85°C.
D1D20K
The Crydom D1D20K is a single solid state relay with a control current of 0.01 A and max on-state current of 20 A. Featuring a MOSFET output circuit type, it offers an optoelectronic transistor output SSR design for applications requiring high isolation voltage up to 3750 V. Ideal for panel mounting, this relay operates in temperatures ranging from -40°C to 100°C.
AQV214EHA
AQV214EHA by Panasonic is a solid state relay with a max forward current of 0.05A and max on-state current of 0.12A. It features a transistor output SSR configuration, with an isolation voltage of 5000V, making it ideal for applications requiring reliable switching in temperatures ranging from -40 to 85°C.
ODC24
Potter & Brumfield
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Control Voltage: 16.5 V; Output Circuit Type: Triac; Minimum Operating Temperature: -30 Cel;
D2W202F
The Crydom D2W202F is a solid state relay with a control current of 0.003 A and max on-state current of 2 A. It features an optoelectronic trigger output SSR, operates at temperatures from -30 to 80 °C, and has a max isolation voltage of 4000 V. Ideal for DC input applications requiring reliable switching in compact spaces.
AQH2213AX
Aromat
TRIGGER OUTPUT SSR; Maximum Forward Current: .05 A; Packing Method: TR; Minimum Operating Temperature: -30 Cel; No. of Elements: 1; Maximum Operating Temperature: 85 Cel;
D2425
Solid State Relays; Control Current: .0034 A; Output Circuit Type: Back to Back SCR; Input Type: DC; Height: 22.9 mm; Minimum Operating Temperature: -30 Cel;
AQY221N2VY
AQY221N2VY by Panasonic is a single solid state relay with a control current of 0.001 A and max forward current of 0.005 A. Featuring a MOSFET output circuit type, it operates b/w -40 to 85 °C and offers an isolation voltage of 1500 V. Ideal for DC input applications requiring low on-state resistance at 0.12 A.
CPC2030N
The Littelfuse CPC2030N is a solid state relay with separate configuration and 2 elements. It has a max forward current of 0.05A, on-state resistance of 30 ohm, and isolation voltage of 1500V. Ideal for applications requiring reliable switching in temperatures ranging from -40°C to 85°C.
AQG22105
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); Length: 24.5 mm; JESD-609 Code: e0; Height: 4.5 mm; Output Circuit Type: MOSFET;
AQY210SZ
The Panasonic AQY210SZ is a SINGLE Solid State Relay with 0.0009 A Control Current and 0.05 A Max Forward Current. Featuring a MOSFET Output Circuit, it operates b/w -40 to 85 °C, making it ideal for AC/DC applications requiring high isolation voltage of 1500 V in compact spaces due to its 2.1 mm Height and 4.3 mm Length in SURFACE MOUNT configuration.
PF240D25R
Sensata Technologies
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn); Maximum On State Current: 25 A; JESD-609 Code: e3; No. of Elements: 1; Additional Features: ULRECOGNIZED,VDEAPPROVED;
CPC1117N
CPC1117N by Littelfuse is a SINGLE MOSFET SSR with 0.05A max forward current, 16 ohm max on-state resistance, and 1500V isolation voltage. Ideal for DC input applications in compact designs requiring high reliability and low power consumption.
SSR240A50
Potter & Brumfield SSR240A50 is a Solid State Relay with Back to Back SCR output circuit. It operates b/w -30°C to 80°C, with a control voltage of 90V AC. Ideal for applications requiring reliable switching in compact spaces.
G3VM-353D
Omron
Omron's G3VM-353D is a single solid state relay with max. forward current of 0.025A and optoelectronic transistor output SSR type. It operates b/w -20°C to 65°C, has max. on-state resistance of 25 ohm, isolation voltage of 2500V, and can handle max. on-state current of 0.15A. Ideal for applications requiring precise switching in temperature-sensitive environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
G3TA-IAZR02S-USAC100-240
TRANSISTOR OUTPUT SSR; Configuration: SINGLE WITH BUILT-IN LED DISPLAY; Additional Features: UL RECOGNIZED; Maximum On State Current: .025 A; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -30 Cel;
G3TA-IDZR02SM-US
G3TA-IDZR02SM-USDC4-24
TRANSISTOR OUTPUT SSR; Configuration: SINGLE; Maximum On State Current: .025 A; No. of Elements: 1; Minimum Operating Temperature: -30 Cel; Maximum Isolation Voltage: 4000 V;
G3TA-IDZR02S-US
G3TA-IDZR02S-USDC5-24
TRANSISTOR OUTPUT SSR; Configuration: SINGLE WITH BUILT-IN LED DISPLAY; Maximum Operating Temperature: 80 Cel; Maximum On State Current: .025 A; Maximum Forward Current: .005 A; No. of Elements: 1;
G3TA-OA202SL-US
TRIGGER OUTPUT SSR;
G3TA-OA202SL-USDC12
TRIGGER OUTPUT SSR; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -30 Cel; Configuration: SINGLE WITH BUILT-IN LED DISPLAY; No. of Elements: 1;
G3TA-OA202SL-USDC24
TRIGGER OUTPUT SSR; Maximum On State Current: 2 A; Minimum Operating Temperature: -30 Cel; Maximum Isolation Voltage: 4000 V; No. of Elements: 1; Configuration: SINGLE WITH BUILT-IN LED DISPLAY;
G3TA-OA202SZ-US
G3TA-OA202SZ-USDC12
TRIGGER OUTPUT SSR; Configuration: SINGLE WITH BUILT-IN LED DISPLAY; Minimum Operating Temperature: -30 Cel; Maximum Isolation Voltage: 4000 V; No. of Elements: 1; Maximum Operating Temperature: 80 Cel;
G3TA-OA202SZ-USDC24
TRIGGER OUTPUT SSR; Maximum Isolation Voltage: 4000 V; Maximum On State Current: 2 A; No. of Elements: 1; Configuration: SINGLE WITH BUILT-IN LED DISPLAY; Additional Features: UL RECOGNIZED, ZERO VOLTAGE CROSSING;
G3TA-OD201S-US
G3TA-OD201S-USDC12
TRANSISTOR OUTPUT SSR; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 80 Cel; Maximum Isolation Voltage: 4000 V; Additional Features: UL RECOGNIZED; No. of Elements: 1;
G3TA-OD201S-USDC24
TRANSISTOR OUTPUT SSR; No. of Elements: 1; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 80 Cel; Maximum On State Current: 1 A; Maximum Isolation Voltage: 4000 V;
G3TA-ODX02S-US
G3TA-ODX02S-USDC12
TRANSISTOR OUTPUT SSR; Maximum Isolation Voltage: 4000 V; No. of Elements: 1; Maximum On State Current: 2 A; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 80 Cel;
G3TA-ODX02S-USDC24
TRANSISTOR OUTPUT SSR; Maximum Isolation Voltage: 4000 V; No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -30 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved