Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NXP Semiconductors' TJA1021T/10/C,118 is a LIN transceiver with 8 terminals. It operates b/w -40°C to 150°C, ideal for automotive applications. The package is small outline, surface mountable, and AEC-Q100 compliant.
Median Price
$1.530
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.470
100+ parts
$0.793
1k+ parts
-
10k+ parts
Newark
$1.590
$0.930
$0.816
Arrow
$1.613
$0.764
Mouser Electronics
$1.740
$1.060
$0.933
$0.890
DigiKey
$1.810
$1.074
$0.970
Element14
$2.590
$1.540
$1.370
$1.330
Rochester
$1.080
$0.896
$0.799
Verical
$1.121
$0.999
EBV Elektronik
Farnell
$0.650
$0.570
$0.535
Future Electronics
$0.755
Digiode
$0.697
Nova Conductors
$0.877
Maritex
$2.161
$1.575
$1.141
Component Electronics Inc.
$3.850
$2.880
$2.500
Vyrian
NAC Semi
$0.954
IBS Electronics
$1.066
Anansix
ComSIT Distribution GmbH
ComSIT USA
Q Components
Ampacity Inc.
$0.580
Semicontronic
$0.566
$0.563
Corphita
$0.661
Continental Prestige Electronics
$0.795
$0.780
Argo Parts USA
Netroflash
$0.859
Vigor
$1.270
Microchip USA
$4.775
Modulus Dynamics
$9.391
Advanced Electronics
$11.708
$11.123
Corohmni
$13.589
Aztec Data Supply Inc.
$15.760
Perfect Parts
Glotronic Ltd.
UNI Independent Distributors
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
Plastic/Epoxy material provides durability and reliability, making the product a good choice for long-term use.
Surface mount technology allows for easy installation and space-saving design, ideal for compact systems.
AEC-Q100 screening ensures high quality and reliability, making the product suitable for automotive applications.
Rectangular shape provides compatibility with standard mounting options, making integration easier.
A sufficient number of terminals for connectivity options, ensuring versatility in usage.
Small outline package style saves space and is suitable for compact devices or applications with limited space availability.
High maximum operating temperature allows for reliable performance in various environmental conditions.
Low minimum operating temperature ensures the product can function even in extreme cold environments.
Nickel Palladium Gold terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term performance.
Dual terminal position offers redundancy and flexibility in connection options, enhancing reliability.
Low seated height allows for a compact design and easy fitting in tight spaces.
Narrow width enables the product to be used in applications where space is limited.
High peak reflow temperature ensures proper soldering and reliability during the manufacturing process.
Compact length contributes to the overall small size of the product, suitable for miniaturized devices.
Gull wing terminal form provides mechanical strength and ease of soldering, enhancing product durability and assembly quality.
LIN transceiver type makes the product suitable for use in telecommunications applications, ensuring compatibility and efficient data transmission.
Nominal supply voltage of 12V provides compatibility with standard power sources, making integration easier.
Fine terminal pitch allows for more terminals in a compact space, enabling high-density connections and versatile usage options.
Network Interfaces TJA1021T/10/C,118 attributes and parameters. Explore more Network Interfaces devices from NXP Semiconductors
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Screening Level:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
TJA1021T/10/C,118 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - TJA1021/27/29 Datasheet Chg 24/Mar/2019 TJA1021Tx 17/Feb/2023
PCN Assembly/Origin - Quad source Adv Notice 05/Dec/2016
PCN Packaging - All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Siemens
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
RN2483A-I/RM105
Microchip Technology
RN2483A-I/RM105 by Microchip is a surface mount Ethernet transceiver with 47 terminals. It operates in industrial temperature range (-40 to 85°C) and requires 3.3V supply voltage. This compact module (17.78mm x 26.67mm) is ideal for network interfaces in various applications.
DP83865DVH/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
LTC2875HS8#TRPBF
LTC2875HS8#TRPBF by Analog Devices is a BICMOS technology interface circuit with 8 terminals, operating temperature range of -40 to 125°C. It features matte tin terminal finish, small outline package style, and is suitable for automotive applications requiring a nominal voltage of 3.3V.
SN65HVD231QDR
SN65HVD231QDR by Texas Instruments is a BICMOS interface circuit with 1Mbps data rate and 3.3V nominal voltage. It operates in automotive temperature grade range (-40 to 125°C) and has a small outline package style for surface mount applications. With low supply current (0.017mA), it's ideal for network interfaces in automotive electronics.
KSZ8041TLI
KSZ8041TLI by Microchip Tech is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It has a 48-terminal flatpack package style, matte tin finish, and requires 3.3V supply voltage. Ideal for industrial applications requiring reliable network interfaces in compact spaces.
TCAN4550RGYR
TCAN4550RGYR by Texas Instruments is a network interface chip carrier with 20 terminals, operating temperature range of -40 to 125°C. It has a data rate of 5 Mbps, suitable for automotive applications requiring a nominal voltage of 12V. The package style is very thin profile, making it ideal for surface mount applications in telecom interface circuits.
PCA82C250T/YM,112
PCA82C250T/YM,112 by NXP Semiconductors is a BICMOS technology-based network interface with 1 transceiver. It operates at a nominal voltage of 5V and has a max supply current of 0.07mA. This small outline package is commonly used in automotive applications for interface circuits.
RTL8211FSI-VS-CG
Realtek Semiconductor
Realtek's RTL8211FSI-VS-CG is a 48-terminal Ethernet transceiver with a data rate of 1000 Mbps. It operates b/w -40°C to 85°C, making it suitable for various network interface applications. The chip carrier package style with a very thin profile and no-lead terminal form enables surface mount installation in compact spaces.
SN65HVD233QDRQ1
SN65HVD233QDRQ1 by Texas Instruments is an AEC-Q100 compliant network interface IC with 8 terminals. It operates at -40 to 125°C, supporting a data rate of 1 Mbps at 3.3V supply voltage. Ideal for automotive applications requiring robust communication in harsh environments.
KSZ9031RNXCC
KSZ9031RNXCC by Microchip: Ethernet transceiver with 1000 Mbps data rate, operates at 0-70°C. Features 48 terminals in square chip carrier package for network interfaces. Ideal for commercial telecom applications requiring a compact design and low power consumption.
SN65HVD233DG4
SN65HVD233DG4 by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating b/w -40 to 125°C, it has a supply voltage of 3.3V and consumes up to 6mA. Ideal for automotive applications due to its small outline package and robust temperature grade.
LAN8742AI-CZ-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
MCP2561T-E/SNVAO
MCP2561T-E/SNVAO by Microchip is an AEC-Q100, TS 16949 certified CAN transceiver with 1Mbps data rate. Operating at -40 to 125°C, it has a supply voltage of 5V and consumes max. 70mA current. Ideal for automotive applications due to its small outline package and dual terminal position.
DP83848CVV/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
DP83640TVV
DP83640TVV by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at 3.3 V, suitable for industrial temperature range (-40 to 85 °C). The package style is flatpack, low profile, fine pitch, with a quad terminal position.
LAN8742AI-CZ-TR by Microchip Technology is an Ethernet transceiver with a data rate of 100 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a small package size (4mm x 4mm). It is suitable for network interfaces in various applications.
ISO1042DWVR
ISO1042DWVR by Texas Instruments is a network interface IC with 8 terminals and a small outline package style. It operates at temperatures ranging from -40 to 125 °C and has a nominal voltage of 5V. This IC is commonly used in automotive applications for interface circuits.
DM9161EP
Davicom Semiconductor
DM9161EP by Davicom Semiconductor is a 48-terminal Ethernet transceiver with CMOS technology. It operates at a max temperature of 70°C and has a supply voltage of 3.3V. The package style is flatpack, low profile, fine pitch, making it suitable for network interface applications.
SN65HVD233DR
SN65HVD233DR by Texas Instruments is an automotive-grade interface circuit with 1Mbps data rate. It operates at -40 to 125°C, consuming a max of 6mA at 3.3V. The small outline package with gull wing terminals makes it suitable for network interfaces in harsh environments.
ISO1042QDWVRQ1
ISO1042QDWVRQ1 by Texas Instruments is an AEC-Q100 compliant network interface IC with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. Featuring nickel palladium gold finish, it has a terminal pitch of 1.27mm and nominal voltage of 1.8V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TJA1051TK/3,118
NXP Semiconductors' TJA1051TK/3,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features AEC-Q100 screening level for automotive applications. This small outline package has 8 terminals, 0.65mm pitch, and operates at peak reflow temperature of 260°C.
TJA1042T/3,118
NXP Semiconductors' TJA1042T/3,118 is a network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its temperature grade. The IC features a small outline package style, Gull Wing terminal form, and nickel palladium gold silver finish.
TJA1042TK/3/1J
NXP Semiconductors' TJA1042TK/3/1J is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 8 terminals. It operates b/w -40 to 150°C, has a supply voltage of 5V, and consumes only 0.07 mA. Ideal for automotive applications due to its small outline package style and dual terminal position.
TJA1051T/3/1J
NXP Semiconductors' TJA1051T/3/1J is a CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm and supports surface mount assembly.
TJA1051T/3,118
NXP Semiconductors' TJA1051T/3,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It operates in automotive grade temperatures (-40 to 125°C) and has AEC-Q100 screening level for reliability. With a small outline package style, it's ideal for automotive network interfaces.
TJA1051TK/3/1J
NXP's TJA1051TK/3/1J is an AEC-Q100 compliant CAN transceiver with 5 Mbps data rate, operating at 5V. It features a small outline package with 8 terminals and peak reflow temp of 260°C. Ideal for automotive applications requiring high-speed network interfaces in compact spaces.
TJA1050T/CM,118
TJA1050T/CM,118 by NXP Semiconductors is a network interface IC with 1 transceiver. It operates at a data rate of 1 Mbps and has a nominal voltage of 5V. This small outline package is commonly used in automotive applications.
TJA1042TK/3,118
NXP Semiconductors' TJA1042TK/3,118 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. Operating b/w -40 to 125 °C, it supports data rates up to 1 Mbps. Ideal for automotive applications requiring a compact, low-power interface circuit.
TJA1043T,118
NXP Semiconductors' TJA1043T,118 is a CAN transceiver with 5V nominal voltage and 1Mbps data rate. It features 14 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures reliability in harsh environments.
TJA1042T/3/1J
NXP Semiconductors' TJA1042T/3/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminals, and supports a 5V supply voltage. Ideal for interface circuits in automotive applications due to its robust design and high-temperature tolerance.
TJA1051T/3/CM,118
NXP Semiconductors' TJA1051T/3/CM,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features 8 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures high reliability in harsh environments.
TJA1042T/3/CM,118
NXP Semiconductors' TJA1042T/3/CM,118 is a network interface with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for interface circuits in automotive applications. The small outline package with matte tin finish and gull wing terminals makes it ideal for surface mount designs.
TJA1043T/1J
NXP Semiconductors' TJA1043T/1J is a 14-terminal interface circuit with AEC-Q100 screening. It operates at 5V nominal voltage, suitable for automotive applications. With small outline package style and gull wing terminal form, it measures 8.65mm x 3.9mm x 1.75mm for compact designs.
TJA1042T/1J
NXP Semiconductors' TJA1042T/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminal form, and supports a nominal voltage of 5V. Ideal for interface circuits in automotive applications requiring robust communication solutions.
TJA1040T/CM,118
NXP Semiconductors' TJA1040T/CM,118 is a CMOS interface circuit with 8 terminals and 1 Mbps data rate. It operates at 5V supply voltage, consuming 0.07 mA current. Ideal for network interfaces in automotive applications due to its small outline package and dual terminal position.
TJA1021TK/20/C,118
NXP Semiconductors' TJA1021TK/20/C,118 is a LIN transceiver with 8 terminals. It operates b/w -40 to 150°C, suitable for automotive applications. The package style is small outline with a max seated height of 0.8mm, making it ideal for space-constrained designs.
TJA1051T/E/1J
NXP Semiconductors' TJA1051T/E/1J is an AEC-Q100 compliant CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm, making it ideal for space-constrained designs.
TJA1051T/E,118
NXP Semiconductors' TJA1051T/E,118 is a CAN transceiver with 1 Mbps data rate and 5V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has AEC-Q100 screening level. This small outline package with gull wing terminals is ideal for automotive network interfaces.
TJA1051T/1J
TJA1051T/1J by NXP Semiconductors is a CAN transceiver with 8 terminals, operating at 5V and supporting data rates up to 1 Mbps. It has a temperature range of -40 to 125°C, making it suitable for automotive applications. The package style is small outline with gull wing terminals, ideal for surface mount designs.
TJA1042T/3,112
NXP Semiconductors' TJA1042T/3,112 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its wide temperature range (-40 to 125°C) and small outline package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved