Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HEF4094BTT,118 by NXP Semiconductors is an 8-bit digital shift register with a propagation delay of 330 ns. Operating at a supply voltage range of 3V to 15V, it features positive edge triggering and 3-state output characteristics. Ideal for automotive applications, this CMOS technology-based IC has a compact package style with small outline and thin profile.
Median Price
$0.180
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
1k+ parts
$0.170
10k+ parts
-
Digiode
$0.171
Nova Conductors
$0.182
Vyrian
Anansix
Corphita
$0.162
Continental Prestige Electronics
$0.178
Netroflash
Argo Parts USA
$0.177
Component Stockers USA
$0.980
Microchip USA
$1.235
Corohmni
$3.960
UNI Independent Distributors
This plastic/epoxy material is lightweight, durable, and cost-effective, making the product easy to handle and ideal for various applications.
The surface mount feature allows for easy installation on PCBs, saving space and making the product suitable for compact electronic devices.
Operating at a standard voltage of 5V ensures compatibility with a wide range of systems and power sources.
With a low propagation delay of 330 ns, this shift register can quickly and efficiently process data in real-time applications.
The 3-STATE output feature allows the device to provide high impedance when disabled, reducing power consumption and improving system efficiency.
Having an automotive-grade temperature specification means that this shift register is designed to withstand harsh environmental conditions, making it suitable for automotive applications.
The wide voltage range of up to 15V provides flexibility and reliability, allowing the product to operate in various power supply configurations.
Digital Shift Registers HEF4094BTT,118 attributes and parameters. Explore more Digital Shift Registers devices from NXP Semiconductors
Count Direction:
Family:
JESD-30 Code:
Length:
Logic IC Type:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Output Polarity:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Propagation Delay (tpd):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Trigger Type:
Width:
Minimum fmax:
HEF4094BTT,118 Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitronic Enterprise
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Bkc Semiconductors
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
SN74AHC594N
SN74AHC594N by Texas Instruments is an 8-bit digital shift register with a supply voltage of 3.3V, operating temperature range from -40 to 125°C, and max frequency of 95MHz. It is commonly used in automotive applications due to its CMOS technology, positive edge trigger type, and through-hole terminal form.
74HCT594D-T
NXP Semiconductors
NXP Semiconductors' 74HCT594D-T is an 8-bit digital shift register with a propagation delay of 48ns. Operating b/w -40 to 125°C, it has a supply voltage range of 4.5V to 5.5V and supports a max frequency of 20MHz. Ideal for automotive applications due to its compact size and positive edge trigger type.
SN74AS194D
SN74AS194D by Texas Instruments is a 4-bit digital shift register with a propagation delay of 7 ns at 5V. It operates on TTL technology, has a max frequency of 80 MHz, and is suitable for applications requiring bidirectional count direction. The package style is small outline with gull wing terminals in a tube packing method.
74AHC594D,112
Nexperia
SERIAL IN PARALLEL OUT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
DM8570N
DM8570N by National Semiconductor is an 8-bit digital shift register with TTL technology. It operates at a max frequency of 25MHz and requires a nominal voltage of 5V. This rectangular package with 14 terminals is ideal for commercial applications requiring precise data shifting capabilities.
74HCT595D
Philips Semiconductors
Shift Registers; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HC595MG4
CD74HC595MG4 by Texas Instruments is an 8-bit digital shift register with a propagation delay of 41ns. It operates at a nominal voltage of 5V and has a max frequency of 25MHz. Ideal for applications requiring high-speed data transfer in compact electronic devices.
TPIC6C595D
TPIC6C595D by Texas Instruments is an 8-bit digital shift register with a supply voltage of 5V and load capacitance of 30pF. It features positive edge trigger, open-drain output, and operates in temperatures ranging from -40 to 125°C. Ideal for automotive applications due to its compact size, CMOS technology, and dual terminal position.
SN74HC165D
SN74HC165D by Texas Instruments is an 8-bit digital shift register with a propagation delay of 38ns. Operating at a supply voltage of 5V, it features positive edge triggering and a max frequency of 25MHz. Ideal for automotive applications due to its temperature grade and small outline package style.
74HC594D
Toshiba
MC74VHC595DR2G
MC74VHC595DR2G by Onsemi is an 8-bit digital shift register with a propagation delay of 17ns. It operates at a nominal voltage of 3.3V and has a max frequency of 115MHz. Ideal for applications requiring positive edge triggering, such as military-grade temperature environments.
CD4094BPWRG4
CD4094BPWRG4 by Texas Instruments is a digital shift register with 8 bits and a propagation delay of 840 ns. It operates at a nominal voltage of 5V and can handle temperatures up to 125°C. This versatile component is commonly used in military-grade applications due to its small size and CMOS technology.
CD4517BE
CD4517BE by Texas Instruments is a digital shift register with 64 bits and 2 functions. It operates at a supply voltage of 5V, has a propagation delay of 220ns, and features positive edge trigger type. Ideal for military applications due to its temperature grade and through-hole terminal form.
74HC164N
74HC164N by NXP Semiconductors is an 8-bit digital shift register with a propagation delay of 255 ns and a max frequency of 24 MHz. It operates at a nominal voltage of 5V and has a load capacitance of 50 pF. This CMOS technology component is commonly used in automotive applications for data shifting tasks due to its positive edge trigger type.
74HC165PW-Q100,118
NXP Semiconductors' 74HC165PW-Q100,118 is an 8-bit digital shift register with a propagation delay of 250 ns. Operating at a max frequency of 20 MHz, it has a supply voltage range of 2-6 V and is AEC-Q100 qualified for automotive applications. The compact rectangular package measures 5x4.4 mm with a terminal pitch of 0.65 mm, making it suitable for space-constrained designs in automotive electronics.
74LV164D-Q100J
SERIAL IN PARALLEL OUT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Shift Registers; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
74AHC594PW-Q100,11
NXP Semiconductors' 74AHC594PW-Q100,11 is an AEC-Q100 compliant digital shift register with 8 bits and a supply voltage range of 2-5.5V. Featuring a propagation delay of 15.1ns, it operates in automotive-grade temperatures (-40 to 125°C) and supports a max frequency of 70MHz. Ideal for automotive applications requiring high-speed data shifting in compact designs.
SN74LV164D
SN74LV164D by Texas Instruments is an 8-bit digital shift register with a propagation delay of 32ns and a max frequency of 35MHz. It operates at a nominal voltage of 3.3V, suitable for industrial applications requiring positive edge triggering in a compact small outline package.
74HC165D,652
NXP Semiconductors' 74HC165D,652 is an 8-bit digital shift register with a supply voltage of 5V and propagation delay of 250ns. It operates in automotive-grade temperatures from -40 to 125°C, suitable for applications requiring high-speed data transfer up to 24MHz. The small outline package with gull wing terminals makes it ideal for compact electronic designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HEF4094BT,653
SERIAL IN PARALLEL OUT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
HEF4094BT,653 by NXP Semiconductors is an 8-bit digital shift register with a supply voltage of 5V and propagation delay of 330ns. It features a 3-STATE output and operates in industrial temperature range (-40 to 85°C). Ideal for applications requiring positive edge triggering and true output polarity, such as data storage and signal processing systems.
HEF4094BTT-Q100J
SERIAL IN PARALLEL OUT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
HEF4021BT,653
PARALLEL IN SERIAL OUT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
NXP Semiconductors' HEF4021BT,653 is an 8-bit digital shift register with a supply voltage of 5V and propagation delay of 250ns. It operates in industrial temperatures (-40 to 85°C) and has a max frequency of 6MHz. Ideal for applications requiring true output polarity, such as data storage and signal processing systems.
HEF4094BTTJ
SERIAL IN PARALLEL OUT; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
HEF4094BTS,118
SERIAL IN PARALLEL OUT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
HEF4014BT,653
HEF4014BT,653 by NXP Semiconductors is an 8-bit digital shift register with a supply voltage of 5V and a propagation delay of 260ns. It is used in industrial applications for data storage and transfer.
HEF4094BT-Q100J
HEF4094BT-Q100J by NXP Semiconductors is an 8-bit digital shift register with a propagation delay of 330 ns and a max frequency of 5 MHz. It operates at a supply voltage range of 3-15 V, making it suitable for automotive applications requiring fast data shifting in compact spaces.
HEF4014BT,652
HEF4021BTTJ
PARALLEL IN SERIAL OUT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
HEF4021BTTJ by NXP Semiconductors is an 8-bit digital shift register with a propagation delay of 250 ns. It operates at a nominal voltage of 5V and has a max frequency of 6 MHz. This CMOS technology chip is commonly used in automotive applications for data storage and transfer.
HEF4094BT
Shift Registers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved