Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NARROW BAND HIGH POWER;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
Native Components
$0.084
$0.081
Northwest PG Solutions
$0.093
$0.082
One Stop Electronics
$15.000
UNI Independent Distributors
Corphita
Authorized Procurement Solutions
RF & Microwave Amplifiers CGD985LC attributes and parameters. Explore more RF & Microwave Amplifiers devices from NXP Semiconductors
RF or Microwave Device Type:
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM358D-T
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LM358N
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
TQP3M9035
Qorvo
The Qorvo TQP3M9035 is a wide band medium power RF amplifier with 15 dB gain, suitable for frequencies ranging from 50 MHz to 6 GHz. It can handle up to 23 dBm of CW input power and operates in temperatures from -40°C to 85°C. Ideal for RF and microwave applications requiring high performance amplification.
HMC414MS8GE
Hittite Microwave
NARROW BAND MEDIUM POWER; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Gain: 17 dB; Maximum Operating Frequency: 2800 MHz;
ADL8106ACEZ
Analog Devices
WIDE BAND LOW POWER;
HMC7950LS6TR
Analog Devices' HMC7950LS6TR is a wide band low power RF amplifier with 13 dB gain, operating from 2-28 GHz. It can handle up to 20 dBm CW input power and operates b/w -40°C to +85°C. Ideal for RF & microwave applications requiring high frequency amplification in a compact form factor.
TQP3M9008
Triquint Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; Construction: COMPONENT;
XP1035-QH-0G00
M/a-com Technology Solutions
XP1035-QH-0G00 by M/a-com is a GAAS technology RF amplifier with 26 dB gain, operating from 5900 MHz to 9500 MHz. It has a max input power of 15 dBm and operates on a 6V power supply. Ideal for wideband medium-power applications, it features surface mounting and can withstand temperatures from -55°C to 85°C.
ERA-2SM+
Mini-circuits
The Mini-circuits ERA-2SM+ is a wide band low power RF amplifier with 11.9 dB gain and 50 ohm impedance. It operates from 0 to 6000 MHz, handles up to 15 dBm input power, and has a VSWR of 1.6. Ideal for RF & microwave applications requiring compact surface mount components.
HMC637ALP5E
HMC637ALP5E by Analog Devices is a wide band medium power RF amplifier with a gain of 12 dB. It has a max input power of 25 dBm and operates in temperatures ranging from -40 to 85°C. This component is suitable for applications requiring amplification in the frequency range of 0-6000 MHz.
HMC372LP3ETR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
ADL5544ARKZ-R7
ADL5544ARKZ-R7 by Analog Devices is a wide band medium power RF amplifier with 18.5 dB gain, operating from 30 MHz to 6 GHz. It has a max input power of 18 dBm and operates on a 5V supply, making it suitable for various RF and microwave applications. The component is constructed using bipolar technology in a plastic/epoxy package for surface mounting.
6001
Teledyne Technologies
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Body Material: METAL; Technology: GAAS; Power Supplies (V): 7;
HMC636ST89ETR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 16 dBm;
RA07N4047M-101
Mitsubishi Electric
RA07N4047M-101 by Mitsubishi Electric is a RF amplifier module with max input power of 14.77 dBm and VSWR of 4. It operates in the frequency range of 400-470 MHz, ideal for narrowband high-power applications. With a temperature range from -30 to 90°C, it is suitable for various RF and microwave systems.
RF5110GSR
Rf Micro Devices
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Technology: HYBRID; No. of Functions: 1; Gain: 33 dB;
HMC788ALP2ETR
HMC788ALP2ETR by Analog Devices is a wide band low power RF amplifier with 9 dB gain, suitable for frequencies ranging from 10 MHz to 10 GHz. It can handle a max input power of 20 dBm and operates in temperatures b/w -40°C to 85°C. Ideal for applications requiring RF amplification in various electronic systems.
ABA-31563-BLKG
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 3;
HMC516LC5
HMC516LC5 by Analog Devices is a wide band low power RF amplifier with 18 dB gain and 50 ohm impedance. It operates from 9-18 GHz, with a max input power of 5 dBm. Ideal for RF & microwave applications requiring high performance in a compact ceramic package.
XP1039-QJ-0G0T
Mimix Broadband
WIDE BAND HIGH POWER; Gain: 15.5 dB; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 25 dBm; Terminal Finish: Matte Tin (Sn);
CMD311P34
TQP7M9102-PCB900
WIDE BAND MEDIUM POWER; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CGD914
NXP Semiconductors
WIDE BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Power Supplies (V): 24; Minimum Operating Temperature: -20 Cel; Minimum Operating Frequency: 40 MHz;
CGD914,112
WIDE BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; JESD-609 Code: e4; Package Equivalence Code: SOT-115J; Power Supplies (V): 24;
CGD914MI
WIDE BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Gain: 20.2 dB; Minimum Operating Frequency: 40 MHz; Power Supplies (V): 24;
CGD923
WIDE BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Additional Features: LOW NOISE, HIGH RELIABILITY; JESD-609 Code: e4; Maximum Operating Temperature: 100 Cel;
CGD923,112
WIDE BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Terminal Finish: GOLD; Minimum Operating Frequency: 40 MHz; Package Equivalence Code: SOT-115J;
CGD942C
WIDE BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Additional Features: LOW NOISE, HIGH RELIABILITY; Maximum Operating Frequency: 870 MHz; Construction: MODULE;
CGD942C,112
RF/Microwave Amplifiers; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Package Equivalence Code: SOT-115J; No. of Functions: 1; Power Supplies (V): 24;
CGD944C
WIDE BAND HIGH POWER; Gain: 24 dB; Maximum Operating Temperature: 100 Cel; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 3 dBm; Minimum Operating Temperature: -20 Cel;
CGD944C,112
RF/Microwave Amplifiers; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Power Supplies (V): 24; No. of Functions: 1; Package Equivalence Code: SOT-115J;
CGD982HC
CGD982LC
WIDE BAND HIGH POWER;
CGD985HC
CGD987HC
CGD987HCI
NARROW BAND HIGH POWER; Maximum Operating Frequency: 1003 MHz; Gain: 26 dB; Minimum Operating Frequency: 40 MHz; Terminal Finish: GOLD; JESD-609 Code: e4;
CGD987HCI,112
RF/Microwave Amplifiers; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SOT-115J; Power Supplies (V): 24; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved