Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 560 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
Median Price
$0.303
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.100
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.135
RS Americas
$0.626
$0.488
$0.388
DigiKey
$0.730
$0.317
$0.243
$0.214
Mouser Electronics
$0.244
$0.220
TTI Europe
$0.209
$0.181
$0.178
Verical
$0.256
$0.228
Farnell
$0.195
$0.167
TTI
$0.212
$0.179
Element14
$0.321
$0.226
Master Electronics
$0.213
Newark
$0.335
$0.295
$0.273
Chip1Stop
$0.426
Nova Conductors
$0.201
TME
$0.860
$0.302
$0.215
$0.169
R&J Components
Rutronik
$0.180
$0.160
Vyrian
Rapid Electronics
$0.245
IBS Electronics
$0.206
Martec Srl
Rebound Electronics
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Bristol Electronics
EMSNET
Semicontronic
$0.148
$0.144
Bastille Electronics
$0.191
Argo Parts USA
Corohmni
$0.260
Allen Electronics Distributors
$0.324
$0.239
Abacus Technologies
GreenTree Electronics
Perfect Parts
Cyclops Electronics Ltd (Excess)
Continental Prestige Electronics
$0.233
$0.142
Authorized Procurement Solutions
Glotronic Ltd.
Computer Components Inc. - USA
Fixed Capacitors R46KI322000M2M attributes and parameters. Explore more Fixed Capacitors devices from Nissei Electric
Capacitance:
Capacitor Type:
Dielectric Material:
JESD-609 Code:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Packing Method:
Positive Tolerance:
Rated AC Voltage (URac):
Rated DC Voltage (URdc):
Terminal Finish:
Terminal Shape:
R46KI322000M2M Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.25.00.70
SB
Nissei Electric Co., Ltd is an international company which manufactures film capacitors. It was established in Okaya city, Nagano prefecture in Japan in 1959 . We currently have 6 facilities and R&D centers in Japan and in China ; Hanamaki / Ichinohe / Okaya in Japan, and Shanghai / Yangzhou / Yichun in China. We have looked after the market in the United States, Japan, China and Europe. With our sales offices in Tokyo and Osaka in Japan, Shanghai and Shenzhen in China, and Hong Kong, we have formed our professional distribution network in the United States and Europe as well as Asian countries so that we are able to sell products around the world. Nissei Electric Co., Ltd aims to produce a variety of products that meet both industry standards and customers’ expectations for quality side. In consideration of the environment, we increasingly aim at the green technologies and offer products with renewable energy sources and have determined to reduce impacts on the environment. Our products have been widely used in communications, lighting, power supply, electrical appliances, industrial products and other various fields. Our primary commitment is to develop sophisticated slitting technologies for coated materials through focused research, innovative engineering, and high quality manufacturing. Our experts are continually researching new technologies, developing more efficient and advanced products, and providing consultations and test services for our client. Currently we are successfully making products with long life, small size and high capacity, which are used in the industry of new energy cars, solar power, wind power and the new LED light source.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
New England Semiconductor
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
CL10A475KP8NNNC
Samsung Electro-mechanics
Samsung Electro-mechanics' CL10A475KP8NNNC is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for SMT applications requiring compact size and high reliability. The capacitor's tan delta of 0.1 ensures low dissipation factor for efficient performance in various electronic devices.
CGA5L1X7R1E106K160AE
TDK
TDK's CGA5L1X7R1E106K160AE is a ceramic capacitor with 10uF capacitance, 25V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact 3.2x1.6x1.6mm size.
C0603C104K5RACTU
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
M39006/22-0345
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
GRM188R61E225KA12D
Murata Manufacturing
Murata Manufacturing's GRM188R61E225KA12D is a ceramic capacitor with 2.2uF capacitance and 25V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C. Ideal for surface mount applications due to its compact size of 1.6mm x 0.8mm x 0.8mm.
C0603C104J5RACTU
KEMET C0603C104J5RACTU is a ceramic capacitor with capacitance of 0.1uF, rated for 50V. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for SMT applications requiring compact size and high reliability. Its multi-layer design and wraparound terminals ensure stable performance in various electronic circuits.
M39006/22-0351
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CL31B106KBHNNNE
Samsung Electro-mechanics CL31B106KBHNNNE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability.
GRM21BR71H105KA12L
Murata Manufacturing's GRM21BR71H105KA12L is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 2x1.25x1.25mm, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
CL21B473KBCNNNC
Samsung Electro-mechanics CL21B473KBCNNNC is a ceramic capacitor with 0.047uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
UUD1H221MNL1GS
Nichicon
Nichicon UUD1H221MNL1GS is a 220uF, 50V aluminum electrolytic capacitor with low tan delta of 0.14 and leakage current of 0.11mA. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and high ripple current rating of 335mA.
CC0402MRX5R5BB475
Yageo
Yageo CC0402MRX5R5BB475 is a 4.7uF ceramic capacitor with X5R temp characteristics, 6.3V URdc, and 20% tolerance. Ideal for SMT applications in electronics due to its compact size (1x0.5x0.5mm) and temperature coefficient of 15%/°C.
GRM1555C1H101JA01D
GRM1555C1H101JA01D by Murata is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in a wide temperature range. With SMT package style, it is ideal for compact electronic devices needing high-quality capacitors.
M39006/22-0377
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C0603C103K5RAC7081
KEMET Corporation's C0603C103K5RAC7081 is a ceramic capacitor with capacitance of 0.01uF, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size and high reliability.
C0805C104K5RAC7215
KEMET C0805C104K5RAC7215 is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance. Ideal for surface mount applications in electronics due to its compact size of 2x1.25x0.78mm and operating range from -55°C to 125°C.
C0805C106K4PACTU
KEMET C0805C106K4PACTU is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X5R temperature coefficient. Ideal for SMT applications due to its rectangular package shape and wraparound terminals. Operating range from -55°C to 85°C makes it suitable for various electronic devices.
MAL202137479E3
Vishay Intertechnology's MAL202137479E3 is a 47uF aluminum electrolytic capacitor with 40V rated DC voltage. It features a tan delta of 0.11, leakage current of 0.0078mA, and ripple current of 110mA. Ideal for applications requiring high capacitance and reliability in temperatures ranging from -40 to 85°C.
C0402C220J5GACTU
KEMET Corporation's C0402C220J5GACTU is a ceramic capacitor with 0.000022 uF capacitance, rated for 50V. With a temperature coefficient of 30ppm/°C and operating range from -55 to 125 °C, it's ideal for SMT applications requiring precise voltage regulation in compact spaces.
CL05A105KP5NNNC
CL05A105KP5NNNC by Samsung Electro-mechanics is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55°C to 85°C. Ideal for surface mount applications due to its compact size of 1x0.5x0.55mm, making it suitable for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R46.KI.3100.00.M1.K
R46.KI.3100.00.M1.K by KEMET: POLYPROPYLENE film capacitor with 0.1uF capacitance, 275V URac, -40 to 110°C temp range. Ideal for IEC60384-14 standard applications requiring reliable fixed capacitors in bulk packaging.
R46KI310000M1K
R46KI310000M1K by KEMET Corp is a film capacitor with 0.1uF capacitance, rated 560V URdc & 275V URac. It has POLYPROPYLENE dielectric material, -40 to 110 °C operating temp range & is used in applications requiring high voltage tolerance.
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 560 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
R46KN422000P0M
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 560 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
R46KF310000P1M
R46KI322040P0M
R46KI310050M1K
R46.KI.3100.50.M1.K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE; Negative Tolerance: 10 %;
R46KI310050M1K by KEMET Corp is a POLYPROPYLENE film capacitor with capacitance of 0.1uF, rated DC voltage of 560V, and rated AC voltage of 275V. It is used in applications requiring high temperature tolerance up to 110°C, such as power supplies and industrial equipment due to its through hole mounting feature.
R46.KI.2470.00.01.K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .047 uF; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE; Positive Tolerance: 10 %;
R46KI24700001K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .047 uF; Rated DC Voltage (URdc): 560 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
R46.KI.3220.00.M2.M
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .22 uF; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE; Minimum Operating Temperature: -40 Cel;
R46KI310040H1M
R46KI310040H1M by KEMET Corp is a POLYPROPYLENE film capacitor with capacitance of 0.1uF, rated DC voltage of 560V, and URac of 275V. It is used in applications requiring high reliability and performance under temperatures ranging from -40 to 125 °C, such as power supplies and industrial equipment.
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 560 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: POLYPROPYLENE;
R46KI322000M2M
R46KI347050M1K
R46KI347050M1K by KEMET Corp is a POLYPROPYLENE film capacitor with 0.47 uF capacitance, rated 560V URdc & 275V URac. It has a rectangular package shape for through-hole mounting applications in various industries.
R46KI322000H4K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 560 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: POLYPROPYLENE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved