Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
R46KI347050M1K by KEMET Corp is a POLYPROPYLENE film capacitor with 0.47 uF capacitance, rated 560V URdc & 275V URac. It has a rectangular package shape for through-hole mounting applications in various industries.
Median Price
$0.493
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Distrelec
1+ parts
100+ parts
$0.450
1k+ parts
$0.375
10k+ parts
$0.343
DigiKey
$1.070
$0.538
$0.401
$0.347
Mouser Electronics
$1.090
$0.471
$0.437
$0.363
Element14
-
$0.508
$0.376
$0.320
Farnell
$0.431
$0.353
$0.310
Newark
$0.622
$0.557
$0.545
Arrow
$0.298
$0.264
Verical
$0.428
Chip1Stop
$0.248
$0.247
$0.240
Nova Conductors
$0.371
TME
$0.950
$0.459
$0.365
$0.286
Bristol Electronics
$0.408
$0.305
$0.283
Dan-Mar Components
Vyrian
ACDS - Activité Composants Distribution Service
Corohmni
$0.113
Semicontronic
$0.211
$0.206
$0.205
Aztec Data Supply Inc.
$0.300
Argo Parts USA
$0.360
Continental Prestige Electronics
$0.340
$0.293
Perfect Parts
Authorized Procurement Solutions
Polypropylene is known for its excellent electrical properties, making it a reliable choice for capacitors.
Rectangular package allows for efficient utilization of space and easy integration into circuit boards.
Bulk packing is cost-effective and suitable for mass production.
Suitable for applications requiring AC voltage handling up to 275V.
Capable of handling DC voltage up to 560V, making it versatile for various circuit designs.
With a capacitance of 0.47uF, this capacitor is ideal for filtering and smoothing applications.
Can withstand high temperatures up to 110°C, suitable for industrial environments.
Operational even at low temperatures, making it suitable for diverse environmental conditions.
Fixed Capacitors R46KI347050M1K attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated AC Voltage (URac):
Rated DC Voltage (URdc):
Reference Standard:
Terminal Finish:
Terminal Pitch:
Terminal Shape:
Width:
R46KI347050M1K Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.25.00.70
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Surge Components
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
C1005X5R1A475K050BC
TDK
The TDK C1005X5R1A475K050BC is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications due to its small size (1x0.5x0.5mm) and wraparound terminals for surface mounting in various electronic devices.
ECEA1EKS4R7
Panasonic
ECEA1EKS4R7 by Panasonic is a 4.7 uF aluminum electrolytic capacitor with a rated DC voltage of 25 V. It has a tan delta of 0.14 and a leakage current of 0.003 mA, making it suitable for applications requiring stable capacitance and low power loss. Its cylindrical package shape and through-hole mount feature make it easy to install in various electronic devices.
ECA1CHG102B
ECA1CHG102B by Panasonic is a 1000uF aluminum electrolytic capacitor with 16V rated DC voltage. It features tan delta of 0.20, leakage current of 0.16mA, and ripple current of 560mA, making it ideal for automotive applications meeting AEC-Q200 standard.
CL21A106KPFNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics' CL21A106KPFNNNE is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications requiring compact size and high reliability.
PME261JC6100KR30
KEMET Corporation
PME261JC6100KR30 by KEMET: Film capacitor with 0.1uF capacitance, 1000V DC & 500V AC voltage ratings. Ideal for applications requiring fixed capacitors in bulk packaging, such as industrial electronics and power supplies. Operating temperature range from -40°C to 100°C, with a compact rectangular package style for through-hole mounting.
ECA2AM4R7
ECA2AM4R7 by Panasonic is a 4.7uF ALUMINUM ELECTROLYTIC CAPACITOR with 100V URdc, suitable for applications requiring high ripple current (50mA) and low leakage current (0.0047mA). With a cylindrical package shape and through-hole mount feature, it is ideal for electronic circuits operating b/w -40°C to 85°C.
GCM188R71E105KA64D
Murata Manufacturing
Murata Manufacturing's GCM188R71E105KA64D is a ceramic capacitor with 1uF capacitance, rated at 25V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
BFC238320474
Vishay Intertechnology BFC238320474 is a 0.47uF film capacitor with 630V DC and 220V AC ratings. Featuring polypropylene dielectric, it has a rectangular package shape for through-hole mounting applications. With a temperature range of -55 to 105 °C, it is ideal for various electronic circuits requiring high capacitance and voltage tolerance.
C1210C106K5RACTU
KEMET C1210C106K5RACTU is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (3.2x2.5x2.5mm) and high operating temperature range (-55 to 125°C).
C1206C104K1RACTU
C1206C104K1RACTU by KEMET is a ceramic capacitor with 0.1uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and compact dimensions of 3.2mm x 1.6mm x 0.78mm.
M39006/25-0143
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM188R61E225KA12D
Murata Manufacturing's GRM188R61E225KA12D is a ceramic capacitor with 2.2uF capacitance and 25V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C. Ideal for surface mount applications due to its compact size of 1.6mm x 0.8mm x 0.8mm.
C0402C102K5RACTU
KEMET C0402C102K5RACTU is a ceramic capacitor with 0.001uF capacitance, 50V URdc, and X7R temp characteristics. Ideal for SMT applications due to its small size (1x0.5x0.5mm) and high temp range (-55 to 125°C). Suitable for various electronic circuits requiring stable capacitance under harsh conditions.
C0603C223K5RACTU
The KEMET C0603C223K5RACTU is a ceramic capacitor with 0.022uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact rectangular package capacitors.
GRM188R61H225KE11D
GRM188R61H225KE11D by Murata Manufacturing is a ceramic capacitor with 2.2uF capacitance and 50V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C. Ideal for surface mount applications in various electronic devices due to its compact size and high reliability.
C3216X5R1V226M160AC
TDK C3216X5R1V226M160AC is a SMT ceramic capacitor with 22uF capacitance, 35V URdc, and X5R temp. coef. Ideal for surface mount applications in electronics due to its compact size and high temp. rating of -55 to 85 °C.
C3216X7R2A105K160AA
TDK's C3216X7R2A105K160AA is a 1uF ceramic capacitor with 10% tolerance, X7R temperature coefficient, and 100V rated DC voltage. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range from -55 to 125°C.
CGA2B2X7R1E103K050BA
TDK's CGA2B2X7R1E103K050BA is a ceramic capacitor with capacitance of 0.01uF, rated at 25V DC. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
UCD1H221MNL1GS
Nichicon
Nichicon UCD1H221MNL1GS is a 220uF aluminum electrolytic capacitor with 50V URdc. It has low tan delta of 0.10 and leakage current of 0.11mA, suitable for AEC-Q200 applications in automotive electronics due to its high ripple current rating of 350mA.
M39006/22-0565
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R46.KI.3100.00.M1.K
R46.KI.3100.00.M1.K by KEMET: POLYPROPYLENE film capacitor with 0.1uF capacitance, 275V URac, -40 to 110°C temp range. Ideal for IEC60384-14 standard applications requiring reliable fixed capacitors in bulk packaging.
R46KI310000M1K
Nissei Electric
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 560 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
R46KI310000M1K by KEMET Corp is a film capacitor with 0.1uF capacitance, rated 560V URdc & 275V URac. It has POLYPROPYLENE dielectric material, -40 to 110 °C operating temp range & is used in applications requiring high voltage tolerance.
R46KN422000P0M
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 560 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
R46KF310000P1M
R46KI322040P0M
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 560 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
R46.KI.3100.50.M1.K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE; Negative Tolerance: 10 %;
R46KI310050M1K
R46KI310050M1K by KEMET Corp is a POLYPROPYLENE film capacitor with capacitance of 0.1uF, rated DC voltage of 560V, and rated AC voltage of 275V. It is used in applications requiring high temperature tolerance up to 110°C, such as power supplies and industrial equipment due to its through hole mounting feature.
R46.KI.2470.00.01.K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .047 uF; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE; Positive Tolerance: 10 %;
R46KI24700001K
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .047 uF; Rated DC Voltage (URdc): 560 V; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE;
R46.KI.3220.00.M2.M
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .22 uF; Maximum Operating Temperature: 110 Cel; Dielectric Material: POLYPROPYLENE; Minimum Operating Temperature: -40 Cel;
R46KI310040H1M
R46KI310040H1M by KEMET Corp is a POLYPROPYLENE film capacitor with capacitance of 0.1uF, rated DC voltage of 560V, and URac of 275V. It is used in applications requiring high reliability and performance under temperatures ranging from -40 to 125 °C, such as power supplies and industrial equipment.
FILM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 560 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: POLYPROPYLENE;
R46KI322000M2M
R46KI347050M1K
R46KI347050M1K by Nissei Electric is a film capacitor with a capacitance of 0.47 uF and rated DC voltage of 560 V. It has a max operating temperature of 110°C and can be mounted through hole. This capacitor is commonly used in applications requiring fixed capacitors for electrical circuits.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved