Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
GRM21BR61C106KE15L by Murata Manufacturing is a ceramic capacitor with a capacitance of 10 uF and a rated DC voltage of 16 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
Median Price
$0.029
Lifecycle Status
Suppliers In-Stock
66
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.391
100+ parts
$0.372
1k+ parts
10k+ parts
-
TTI Europe
$0.016
Future Electronics
$0.076
Element14
$0.106
$0.053
$0.044
Chip1Stop
$0.012
$0.009
Farnell
$0.038
$0.022
Arrow
$0.017
Verical
$0.020
Distrelec
DF Sales Co.
$0.015
Voyager Components
Nova Conductors
$0.052
TME
$0.130
$0.035
$0.021
$0.019
Component Electronics Inc.
$0.580
$0.430
$0.380
Classic Components Corporation
J2 Sourcing AB
Vyrian
Chip Stock
Microfarads
IBS Electronics
$0.164
NAC Semi
$0.156
ComSIT USA
ComSIT Distribution GmbH
Greenchips
SIE Connect GmbH - GreenChips
Holdelec - ElecDif-Pro
Prism Electronics
Cyclops Electronics Ltd
Rutronik
$0.013
Ack Elektronik San.Tic.Ltd.Sti
Inventory MP
Dan-Mar Components
Bristol Electronics
Contempo Components LLC
LWI Electronics Inc
Next Level Components, LLC
Connector Distribution Corp
Right Parts Inc.
North Shore Components
SPM Sales
Atlantic Semiconductor
Pegasus Components GmbH
LIBRA Elektronik GmbH
PC Components Company LLC
Sunrise Surplus Inc.
Elcom Components
NPI Materials, Inc.
Sensible Micro Corp
A2Z Electronics, Inc.
Connect4Technologies Inc.
Ashlea Components Ltd
Lantek
EPE Components Inc.
Rebound Electronics
EMSNET
Netsource Technology, Inc.
Extreme Components
Speed Components Ltd
Electronics Depot
Semi Source
Florida Circuit
Component Sense
QIE Inc.
Legend Electronics Inc.
NexGen Digital
Semicontronic
Argo Parts USA
$0.036
Corohmni
$0.046
Continental Prestige Electronics
$0.059
$0.048
Advanced Electronics
Aztec Data Supply Inc.
$0.403
Modulus Dynamics
$0.475
Benley Electronics
$1.750
GreenTree Electronics
$0.023
S.R.D Solutions
Authorized Procurement Solutions
Epart123
$0.075
Kepictronics
Robosynatics
$0.045
Lucentia Tech
Cyclops Electronics Ltd (Excess)
XScomponents
Eastek
Akira Global LLC
Computer Components Inc. - USA
Futuretech Components
Formix International (Excess)
Speed Components Ltd (Excess)
Netroflash
$0.051
$0.049
Ceramic is a common and reliable dielectric material that provides stable performance over a wide temperature range.
Rectangular packages are easy to handle and provide efficient use of space on circuit boards.
Multi-layer construction allows for increased capacitance in a compact size, ideal for space-constrained applications.
The embossed tape packaging method ensures easy handling and protection during transportation and storage.
The two terminal design simplifies the installation and connection of the capacitor in circuits.
X5R temperature characteristics provide stable performance over a wide temperature range, suitable for various operating conditions.
The 10uF capacitance value is suitable for filtering and decoupling applications in electronic circuits.
The 16V rated DC voltage allows for use in a variety of voltage applications while ensuring reliable operation.
Fixed Capacitors GRM21BR61C106KE15L attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
GRM21BR61C106KE15L Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - GRM Series Production Capacity 31/Jul/2023
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Hitano Enterprise
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
C0603C103J3GACTU
KEMET Corporation
KEMET Corporation's C0603C103J3GACTU is a ceramic capacitor with capacitance of 0.01uF, rated for 25V. With a temperature coefficient of 30ppm/°C, it operates b/w -55 to 125 °C, making it ideal for surface mount applications in various electronic devices.
BFC237076104
Vishay Intertechnology
Vishay Intertechnology BFC237076104 is a film capacitor with 0.1 uF capacitance, 63 V rated DC voltage, and 40 V rated AC voltage. It features polyester dielectric material, radial package style, and through hole mount for automotive applications meeting AEC-Q200 standard.
M39006/22-0377
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
GRM033R71A103KA01D
Murata Manufacturing
The Murata Manufacturing GRM033R71A103KA01D is a ceramic capacitor with 0.01uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact components with stable performance.
GRM1555C1H120JA01D
GRM1555C1H120JA01D by Murata is a ceramic capacitor with capacitance of 0.000012 uF and rated DC voltage of 50V. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high precision and stability. Its compact rectangular package and surface mount feature enhance versatility in various electronic circuits.
GRM155R71C104KA88D
Murata Manufacturing's GRM155R71C104KA88D is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
T491B105K035AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C4532X5R1E226M250KA
TDK
TDK's C4532X5R1E226M250KA is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85°C, making it suitable for various surface mount applications requiring stable performance in a compact rectangular package.
UCL1V101MCL6GS
Nichicon
Nichicon UCL1V101MCL6GS is a 100uF, 35V aluminum electrolytic capacitor with 0.12 Tan Delta and 0.035mA Leakage Current. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and -55 to 105°C operating temperature range.
M39006/25-0052
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM1885C1H101JA01D
Murata Manufacturing's GRM1885C1H101JA01D is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in temperatures ranging from -55 to 125 °C. With SMT package style, it is ideal for compact electronic devices.
TAJA106K016RNJV
KYOCERA AVX
TAJA106K016RNJV by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 16V URdc. It has a compact SMT package style, -55 to 125 °C operating temperature range, and 3000 mohm ESR. Ideal for applications requiring high reliability and stable capacitance in harsh environments.
M39006/22-0350
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C103K5RACAUTO7411
KEMET Corporation's C0603C103K5RACAUTO7411 is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.01 uF capacitance. Ideal for automotive applications due to AEC-Q200 standard compliance, rated at 50V DC voltage, and compact SMT package style for surface mounting feature.
12105C106K4T2A
12105C106K4T2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance, rated for 50V. It features X7R temperature characteristics and -55 to 125 °C operating range, suitable for AEC-Q200 applications. With a compact SMT package style and multi-layer design, it offers high reliability in automotive electronics.
UMK107AB7105KA-T
Taiyo Yuden
Taiyo Yuden's UMK107AB7105KA-T is a ceramic capacitor with 1uF capacitance and 50V URdc. With X7R temperature characteristics, it has a -55 to 125 °C operating range. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm.
GRM188Z71A106KA73D
GRM188Z71A106KA73D by Murata is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
C1206C226M8RACTU
KEMET C1206C226M8RACTU is a ceramic capacitor with 22uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact rectangular package shape and wraparound terminals.
C1608X7R1H104K080AE
TDK C1608X7R1H104K080AE is a SMT ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in varying temperatures.
BFC241646803
Vishay Intertechnology BFC241646803 is a film capacitor with 0.068 uF capacitance, 63 V rated DC voltage, and 25 V rated AC voltage. It features polypropylene dielectric material and is suitable for applications requiring a temperature range of -55 to 85 °C. Ideal for through hole mounting in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GRM21BR61E226ME44L
The Murata Manufacturing GRM21BR61E226ME44L is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
GRM21BR60J226ME39L
Murata Manufacturing's GRM21BR60J226ME39L is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C, making it ideal for surface mount applications in various electronic devices.
GRM21BR61A476ME15L
The Murata Manufacturing GRM21BR61A476ME15L is an 0805 SMT ceramic capacitor with a capacitance of 47uF, rated at 10V. With X5R temperature characteristics and -55 to 85°C operating range, it's ideal for surface mount applications requiring stable performance in compact designs.
GRM21BR61E106KA73L
Murata Manufacturing's GRM21BR61E106KA73L is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
GRM21BR71H105KA12L
Murata Manufacturing's GRM21BR71H105KA12L is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 2x1.25x1.25mm, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
GRM21BR61A106KE19L
Murata Manufacturing's GRM21BR61A106KE19L is a ceramic capacitor with 10uF capacitance, 10% tolerance, and X5R temperature characteristics. It operates b/w -55 to 85°C, ideal for surface mount applications in various electronic devices requiring stable capacitance at different temperatures.
GRM21BR71A106KE51L
Murata Manufacturing's GRM21BR71A106KE51L is a ceramic capacitor with 10uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (2x1.25x1.25mm) and high operating temperature range (-55 to 125°C).
GRM21BR60J107ME15L
Murata Manufacturing's GRM21BR60J107ME15L is a ceramic capacitor with 100uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GRM21BR61H106KE43L
Murata Manufacturing's GRM21BR61H106KE43L is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications due to its compact size of 2x1.25x1.25mm.
GRM21BR71H104KA01L
Murata Manufacturing's GRM21BR71H104KA01L is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GRM21BR61H475KE51L
Murata Manufacturing's GRM21BR61H475KE51L is a ceramic capacitor with 4.7uF capacitance and 50V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 2x1.25x1.25mm, making it suitable for various electronic devices requiring stable capacitance performance.
GRM21BR71C105KA01L
Murata Manufacturing's GRM21BR71C105KA01L is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. With X7R temperature characteristics, it operates b/w -55°C to 125°C. Ideal for surface mount applications in electronics due to its compact size and high reliability.
GRM21BR6YA106KE43L
Murata Manufacturing's GRM21BR6YA106KE43L is an 0805 SMT ceramic capacitor with 10uF capacitance and 35V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and reliable performance in various electronic devices.
GRM21BR71A106KA73L
Murata Manufacturing's GRM21BR71A106KA73L is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and 15% temp coef. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GRM21BR61A226ME51L
Murata Manufacturing's GRM21BR61A226ME51L is a ceramic capacitor with 22uF capacitance, 10V URdc, and X5R temp characteristics. Ideal for SMT applications due to its compact size and surface mounting feature.
GRM2195C1H103JA01D
GRM2195C1H103JA01D by Murata Manufacturing is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance over a wide temperature range. With surface mounting feature and compact dimensions (2mm x 1.25mm x 0.85mm), it is ideal for use in electronic devices where space is limited.
GRM216R71H103KA01D
Murata Manufacturing's GRM216R71H103KA01D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, with ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance at varying temperatures.
GRM21BR61E226ME44K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
GRM21BR60J476ME15L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
GRM21BR61C106KE15C
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved