Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EMVY500ADA221MJA0G by Nippon Chemi-con is a 220uF, 50V ALUMINUM ELECTROLYTIC CAPACITOR with Tan Delta of 0.12 and Leakage Current of 0.11mA. It is used in SMT applications for filtering and energy storage due to its high Ripple Current of 500mA and compact CYLINDRICAL PACKAGE design.
Median Price
$0.325
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Verical
$0.383
$0.307
$0.267
TTI
$0.176
Mouser Electronics
$0.321
Nova Conductors
$0.459
Bristol Electronics
$1.125
$0.450
Chip Stock
Vyrian
Pegasus Components GmbH
QIE Inc.
Aztec Data Supply Inc.
$0.128
Ampacity Inc.
$0.150
Argo Parts USA
$0.445
Netroflash
Corohmni
Continental Prestige Electronics
$0.759
$0.337
$0.224
Perfect Parts
Kepictronics
Abacus Technologies
Aluminum electrolytic capacitors are known for their high capacitance values and excellent performance in a wide range of applications, making this product a reliable choice.
Low tan delta indicates that the dielectric material has low dissipation factor, ensuring minimal energy loss and high efficiency of the capacitor.
Low leakage current ensures that the capacitor maintains its charge over time, contributing to the stability and reliability of the circuit.
High ripple current handling capability allows the capacitor to smooth out voltage fluctuations effectively, making it suitable for power supply applications.
The high capacitance value makes this capacitor suitable for filtering and energy storage applications, providing ample charge storage capacity.
With a high rated voltage, this capacitor can withstand voltage spikes and surges, ensuring reliable operation in various electronic circuits.
Fixed Capacitors EMVY500ADA221MJA0G attributes and parameters. Explore more Fixed Capacitors devices from Nippon Chemi-con
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
EMVY500ADA221MJA0G Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Since its founding in 1931, Nippon Chemi-Con has worked on the development of various electronic components, starting with aluminum electrolytic capacitors. It is our greatest pleasure to be able to contribute to the development of cutting-edge industries as a member. Advances in globalization have ushered in a new era for the electronics industry. New markets are opening up on the world stage, new values are emerging, and new competition is beginning. Nippon Chemi-Con transforms itself at a speed that anticipates change, builds a highly mobile and flexible management system, and aims to be a company optimized for the times. This is because we believe that our primary mission is to always look at the times from the same point of view as our customers, read the next generation, and link it to product development as soon as possible. As we enter the century of the environment, there is a demand for eco-friendly products that are friendly to the earth and people. We believe that this era full of change is the perfect opportunity to make use of the technological capabilities we have cultivated over many years, and we will work with even greater determination to develop products that create the trends of the times. Nippon Chemi-Con will continue to take on the challenge of creating a prosperous future through the development of small electronic components.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Lite-on Semiconductor
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
Surge Components
BSS123NH6327XTSA1
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
440LS10-R
Vishay Intertechnology
Vishay Intertechnology's 440LS10-R is a ceramic capacitor with 0.01 uF capacitance, rated at 760 V AC. It has a temperature coefficient of -56/+22% and operates b/w -30 to 125 °C. Ideal for applications requiring fixed capacitors in bulk packaging with radial terminal style.
EEEFK1V101XP
Panasonic
Panasonic EEEFK1V101XP is a 100uF aluminum electrolytic capacitor with 35V rated DC voltage. It has tan delta of 0.12 and ripple current of 210mA, suitable for surface mount applications in automotive electronics due to AEC-Q200 compliance.
GRM155R71C104KA88J
Murata Manufacturing
Murata Manufacturing's GRM155R71C104KA88J is a ceramic capacitor with capacitance of 0.1uF, rated for 16V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in electronics requiring compact components with high reliability.
GRM188R60J106KE47D
Murata Manufacturing's GRM188R60J106KE47D is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C, making it ideal for surface mount applications in various electronic devices.
EEUFR1H102B
Panasonic EEUFR1H102B is a 1000uF, 50V aluminum electrolytic capacitor with tan delta of 0.12 and ripple current of 2490mA. Ideal for applications requiring high capacitance and voltage stability in temperatures ranging from -40 to 105°C.
CL10A475KQ8NNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL10A475KQ8NNNC is a ceramic capacitor with 4.7uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 15% temp coef. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
T491C106K025AT
KEMET Corporation
KEMET T491C106K025AT is a 10uF, 25V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 108mA. Ideal for surface mount applications in electronics requiring stable capacitance at temperatures ranging from -55 to 125°C.
ESH475M050AC3AA
Nissei Electric
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
CL21C221JBANNNC
Samsung Electro-mechanics CL21C221JBANNNC is a ceramic capacitor with capacitance of 0.00022uF and rated DC voltage of 50V. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high precision and stability in various electronic circuits.
C1005X5R0J475K050BC
TDK
The TDK C1005X5R0J475K050BC is a ceramic capacitor with 4.7uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
C0603C104K4RACTU
KEMET Corporation's C0603C104K4RACTU is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact fixed capacitors with reliable performance.
M39006/25-0143
KYOCERA AVX
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0805C105K4RACTU
The KEMET C0805C105K4RACTU is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over varying temperatures.
C1210C226M3RACTU
KEMET Corporation's C1210C226M3RACTU is a ceramic capacitor with 22uF capacitance, 25V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance from -55 to 125 °C.
06035C103JAT2A
06035C103JAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, 50V URdc, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125 °C.
CKG57NX7S2A226M500JJ
CKG57NX7S2A226M500JJ by TDK is a ceramic capacitor with 22uF capacitance, rated for 100V. With X7S temperature characteristics and -55 to 125°C operating range, it's ideal for automotive applications meeting AEC-Q200 standard. Its compact size of 5x5x6mm and J bend terminals make it suitable for surface mount installations.
C1206C106K4RACTU
KEMET C1206C106K4RACTU is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance from -55 to 125°C. Features wraparound terminals and compact rectangular package design.
M39006/22-0639
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 86 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CC0603KRX5R6BB475
Yageo
Yageo CC0603KRX5R6BB475 is a SMT ceramic capacitor with 4.7uF capacitance, 10V URdc, and X5R temp characteristics. Ideal for applications requiring compact size, it operates b/w -55 to 85 °C in various electronic circuits.
CL10C101JB8NNNC
CL10C101JB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance over a wide temperature range. With its compact SMT package style and surface mounting feature, this capacitor is ideal for use in electronic devices where space is limited.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EMVY101ARA101MKE0S
United Chemi-con
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 100 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Polarity: POLARIZED;
Nippon Chemi-con
EMVY101ARA101MKE0S by Nippon Chemi-con is a 100uF aluminum electrolytic capacitor with a rated DC voltage of 100V. It features a tan delta of 0.1 and leakage current of 0.1mA, making it suitable for applications requiring high ripple current handling capabilities. With a cylindrical package shape and surface mounting feature, it is ideal for use in automotive electronics meeting AEC-Q200 standards.
EMVY350ARA471MKE0S
EMVY350ARA471MKE0S by Nippon Chemi-con is a 470uF aluminum electrolytic capacitor with 35V rated DC voltage. It features tan delta of 0.14, leakage current of 0.1645mA, and ripple current of 410mA. Ideal for automotive applications meeting AEC-Q200 standard, it operates b/w -55°C to 105°C with SMT mounting in a cylindrical package.
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 470 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Length: 13.7 mm;
EMVY250ADA331MHA0G
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY500ADA221MJA0G
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 220 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); No. of Terminals: 2;
EMVY500ADA470MF80G
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); JESD-609 Code: e6;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY500ADA101MHA0G
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY350ADA221MHA0G
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 220 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Negative Tolerance: 20 %;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY500ADA4R7ME55G
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Package Style (Meter): SMT;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY350ADA100ME55G
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Size Code: 2321;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY6R3ADA152MJA0G
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 1500 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Package Style (Meter): SMT;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1500 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY500ADA221MJA0N
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved