Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 220 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); No. of Terminals: 2;
Median Price
$0.325
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
$0.448
10k+ parts
$0.350
Chip1Stop
TTI
$0.176
Mouser Electronics
$0.321
Nova Conductors
$0.459
Chip Stock
Vyrian
Pegasus Components GmbH
QIE Inc.
Bristol Electronics
$0.731
Aztec Data Supply Inc.
$0.128
Ampacity Inc.
$0.150
Argo Parts USA
$0.445
Netroflash
$0.450
Corohmni
Continental Prestige Electronics
$0.759
$0.337
$0.224
Perfect Parts
Kepictronics
Abacus Technologies
Fixed Capacitors EMVY500ADA221MJA0G attributes and parameters. Explore more Fixed Capacitors devices from United Chemi-con
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
Length:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Width:
EMVY500ADA221MJA0G Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
United Chemi-Con Inc., a wholly owned subsidiary of Nippon Chemi-Con Corporation, was established in the United States in 1970. The company is the largest manufacturer and supplier of aluminum electrolytic capacitors in North America, with more than 8,000 unique products available. United Chemi-Con Inc. is headquartered in Rolling Meadows, Ill., with manufacturing and warehouse facilities located in Buena Park, Calif., and Lansing, N.C. This—combined with our sales, service and field engineering support throughout the country—ensures customers are met with a superior level of customer service. To suit the industry’s ever-changing needs, United Chemi-Con Inc. is continuously developing and introducing an array of new products. Additionally, our stringent, regulation-compliant environmental policy strives to minimize our—and our customers’—carbon footprint. So we can promote advanced technology—and protect the planet.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Synsemi
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
GRM32ER71A476KE15L
Murata Manufacturing
Murata Manufacturing's GRM32ER71A476KE15L is a ceramic capacitor with 47uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. It is ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125°C.
C0805C105K5RACTU
KEMET Corporation
KEMET C0805C105K5RACTU is a ceramic capacitor with 1uF capacitance, rated at 50V. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring compact rectangular package design.
C1608X5R1E106M080AC
TDK
C1608X5R1E106M080AC by TDK is a ceramic capacitor with a capacitance of 10 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
GRM1885C1H103JA01D
GRM1885C1H103JA01D by Murata is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, operating from -55 to 125 °C, making it ideal for SMT applications requiring stable performance in a compact size.
06035D104KAT2A
KYOCERA AVX
06035D104KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X5R temp characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for applications requiring compact fixed capacitors in electronic circuits.
C1206C471J5GACTU
KEMET C1206C471J5GACTU is a ceramic capacitor with 0.00047uF capacitance and 50V URdc. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in temperatures ranging from -55 to 125 °C. With SMT package style and matte tin finish, it is ideal for surface mount installations in various electronic devices.
CC0402JRNPO9BN330
Yageo
Yageo CC0402JRNPO9BN330 is a 0402 SMT ceramic capacitor with capacitance of 0.000033 uF, rated for 50V. With C0G temp characteristics and 5% tolerance, it's ideal for applications requiring stable performance in temperatures ranging from -55 to 125 °C. Its compact size and multi-layer design make it suitable for various electronic devices.
C1206C475K3RACTU
KEMET C1206C475K3RACTU is a ceramic capacitor with 4.7uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
C1210C226K3RACTU
KEMET C1210C226K3RACTU is a 22uF ceramic capacitor with X7R temperature characteristics, 25V rated DC voltage, and 10% negative tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range from -55 to 125°C.
GRM21BR6YA106KE43L
Murata Manufacturing's GRM21BR6YA106KE43L is an 0805 SMT ceramic capacitor with 10uF capacitance and 35V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and reliable performance in various electronic devices.
M39006/25-0236
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C103K5RACAUTO7411
KEMET Corporation's C0603C103K5RACAUTO7411 is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.01 uF capacitance. Ideal for automotive applications due to AEC-Q200 standard compliance, rated at 50V DC voltage, and compact SMT package style for surface mounting feature.
06035A470JAT2A
06035A470JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.000047uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance in a wide temperature range from -55 to 125 °C. With SMT package style and wraparound terminals, it is ideal for surface mounting feature in various electronic devices.
B32652-A2102-J
B32652-A2102-J by TDK is a film capacitor with 0.001 uF capacitance, 2000 V rated DC voltage, and 700 V rated AC voltage. It is ideal for applications requiring high voltage tolerance and temperature range of -55 to 85 °C, such as power supplies and industrial equipment.
T491C475K025AT
T491C475K025AT by KEMET: Tantalum capacitor with 4.7uF capacitance, 25V rated DC voltage, and 0.06 Tan Delta. Ideal for applications requiring compact SMT capacitors with low leakage current and high ripple current handling capabilities.
M39006/22-0565
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
T491B105K035AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CL10B103KB8NNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL10B103KB8NNNC is a ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
GRM32ER72A225KA35L
Murata Manufacturing's GRM32ER72A225KA35L is a ceramic capacitor with 2.2uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
GRM188R71E104KA01D
Murata Manufacturing's GRM188R71E104KA01D is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EMVY101ARA101MKE0S
United Chemi-con
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 100 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Polarity: POLARIZED;
Nippon Chemi-con
EMVY101ARA101MKE0S by Nippon Chemi-con is a 100uF aluminum electrolytic capacitor with a rated DC voltage of 100V. It features a tan delta of 0.1 and leakage current of 0.1mA, making it suitable for applications requiring high ripple current handling capabilities. With a cylindrical package shape and surface mounting feature, it is ideal for use in automotive electronics meeting AEC-Q200 standards.
EMVY350ARA471MKE0S
EMVY350ARA471MKE0S by Nippon Chemi-con is a 470uF aluminum electrolytic capacitor with 35V rated DC voltage. It features tan delta of 0.14, leakage current of 0.1645mA, and ripple current of 410mA. Ideal for automotive applications meeting AEC-Q200 standard, it operates b/w -55°C to 105°C with SMT mounting in a cylindrical package.
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 470 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Length: 13.7 mm;
EMVY250ADA331MHA0G
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY500ADA221MJA0G
EMVY500ADA221MJA0G by Nippon Chemi-con is a 220uF, 50V ALUMINUM ELECTROLYTIC CAPACITOR with Tan Delta of 0.12 and Leakage Current of 0.11mA. It is used in SMT applications for filtering and energy storage due to its high Ripple Current of 500mA and compact CYLINDRICAL PACKAGE design.
EMVY500ADA470MF80G
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); JESD-609 Code: e6;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY500ADA101MHA0G
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY350ADA221MHA0G
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 220 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Negative Tolerance: 20 %;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY500ADA4R7ME55G
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Package Style (Meter): SMT;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY350ADA100ME55G
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Size Code: 2321;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY6R3ADA152MJA0G
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 1500 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Package Style (Meter): SMT;
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1500 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
EMVY500ADA221MJA0N
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved