Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EGPD800ELL511MK30H by Nippon Chemi-con is a 510uF aluminum electrolytic capacitor with 80V rated DC voltage. It features low tan delta of 0.08, high ripple current of 1315mA, and low ESR of 42mohm. Ideal for applications requiring reliable performance in temperatures ranging from -40 to 135°C.
Median Price
$2.895
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
$3.410
100+ parts
$1.680
1k+ parts
$1.349
10k+ parts
$1.213
Verical
-
$2.380
Nova Conductors
$1.380
Electro Sonic
$1.487
$1.281
$0.826
IBS Electronics
$1.689
$1.232
Vyrian
Aztec Data Supply Inc.
$0.030
AZTECH Wire
$0.590
$0.570
$0.560
$0.540
Netroflash
Continental Prestige Electronics
$1.352
Argo Parts USA
Corohmni
$1.420
Authorized Procurement Solutions
Aluminum electrolytic capacitors are known for their high capacitance value, making them suitable for high voltage applications.
Low tan delta indicates that this capacitor has low dissipation factor and is efficient in storing and releasing charge.
Low leakage current helps in maintaining the charge for longer durations without significant loss.
High ripple current rating allows this capacitor to handle fluctuations in current effectively, making it suitable for power supply applications.
Radial package style provides easy mounting on circuit boards, enhancing the ease of assembly.
High capacitance value enables this capacitor to store and release large amounts of charge, making it suitable for applications that require high energy storage.
Fixed Capacitors EGPD800ELL511MK30H attributes and parameters. Explore more Fixed Capacitors devices from Nippon Chemi-con
Additional Features:
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Ripple Current (mA):
Tan Delta:
Terminal Finish:
Terminal Pitch:
Terminal Shape:
EGPD800ELL511MK30H Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.20
SB
Since its founding in 1931, Nippon Chemi-Con has worked on the development of various electronic components, starting with aluminum electrolytic capacitors. It is our greatest pleasure to be able to contribute to the development of cutting-edge industries as a member. Advances in globalization have ushered in a new era for the electronics industry. New markets are opening up on the world stage, new values are emerging, and new competition is beginning. Nippon Chemi-Con transforms itself at a speed that anticipates change, builds a highly mobile and flexible management system, and aims to be a company optimized for the times. This is because we believe that our primary mission is to always look at the times from the same point of view as our customers, read the next generation, and link it to product development as soon as possible. As we enter the century of the environment, there is a demand for eco-friendly products that are friendly to the earth and people. We believe that this era full of change is the perfect opportunity to make use of the technological capabilities we have cultivated over many years, and we will work with even greater determination to develop products that create the trends of the times. Nippon Chemi-Con will continue to take on the challenge of creating a prosperous future through the development of small electronic components.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
Goodwork Semiconductor
Sensitron Semiconductor
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
C0402C470K5GACTU
KEMET Corporation
KEMET C0402C470K5GACTU is a ceramic capacitor with 0.000047uF capacitance, rated for 50V. With C0G temperature characteristics and 10% tolerance, it's ideal for SMT applications in a wide temp range (-55 to 125°C). Its compact size (1x0.5x0.5mm) makes it suitable for various electronic devices.
T491A475K016AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
GRM31CR71H475KA12L
Murata Manufacturing
Murata Manufacturing's GRM31CR71H475KA12L is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and high reliability.
GRM21BR71H105KA12L
Murata Manufacturing's GRM21BR71H105KA12L is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 2x1.25x1.25mm, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
C0603C471J5GACTU
KEMET Corporation's C0603C471J5GACTU is a ceramic capacitor with 0.00047uF capacitance and 50V URdc. Featuring C0G temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications due to its compact size of 1.6mm x 0.8mm x 0.8mm.
C3225X7S1H106M250AB
TDK
TDK C3225X7S1H106M250AB is a SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X7S temp code. Ideal for surface mount applications in electronics due to its compact size and high temp range (-55 to 125 °C). Features include multi-layer design, matte tin finish, and negative/positive tolerance of 20%.
CL31B104KBCNNNC
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
TAJC476K016RNJ
KYOCERA AVX
TAJC476K016RNJ by KYOCERA AVX is a 47uF TANTALUM CAPACITOR with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0075mA, and Ripple Current of 188mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125°C.
CL10B475KQ8NQNC
CL10B475KQ8NQNC by Samsung Electro-mechanics is a ceramic capacitor with a capacitance of 4.7 uF and a rated DC voltage of 6.3 V. It has a temperature coefficient of 0.15 ppm/°C and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
GRM188R71A225KE15D
GRM188R71A225KE15D by Murata is a ceramic capacitor with 2.2uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
M39006/21-0143
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CGA5L1X7R1H106K160AE
TDK's CGA5L1X7R1H106K160AE is a ceramic capacitor with 10uF capacitance, rated at 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
EEE1HA101UAP
Panasonic
Panasonic EEE1HA101UAP is a 100uF aluminum electrolytic capacitor with 50V rated DC voltage. It features tan delta of 0.18, leakage current of 0.05mA, and ripple current of 200mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 85°C.
M39006/22-0565
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
0402ZD105KAT2A
0402ZD105KAT2A by KYOCERA AVX is a ceramic capacitor with 1uF capacitance, 10V URdc. X5R temperature code, -55 to 85°C operating range. SMT package for surface mount applications in electronics requiring compact design and reliable performance.
UWT1V221MNL1GS
Nichicon
The Nichicon UWT1V221MNL1GS is a 220uF aluminum electrolytic capacitor with a rated DC voltage of 35V. It features a tan delta of 0.14, leakage current of 0.077mA, and ripple current of 190mA, making it ideal for automotive applications meeting AEC-Q200 standards.
VJ0603Y102KXACW1BC
Vishay Intertechnology
Vishay Intertechnology's VJ0603Y102KXACW1BC is a ceramic capacitor with capacitance of 0.001 uF and rated DC voltage of 50V. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for surface mount applications requiring stable performance in a compact package.
GCM21BR71A106KE22L
Murata Manufacturing's GCM21BR71A106KE22L is an 0805 SMT ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 10% tolerance. It operates b/w -55°C to 125°C, suitable for automotive applications meeting AEC-Q200 standard.
EEUFR1A222L
Panasonic EEUFR1A222L is a 2200uF, 10V Aluminum Electrolytic Capacitor with 0.23 Tan Delta and 0.22mA Leakage Current. Ideal for applications requiring high ripple current handling, such as power supplies and audio amplifiers due to its cylindrical package design and through-hole mounting feature.
EEEFK1H101P
Panasonic EEEFK1H101P is a 100uF Aluminum Electrolytic Capacitor with 50V URdc. It has a Tan Delta of 0.10 and Ripple Current of 262.5mA, suitable for automotive applications meeting AEC-Q200 standard. With -55 to 105 °C operating range, it's ideal for surface mount designs requiring compact cylindrical package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EGPD800ELL102ML35H
Nippon Chemi-con
EGPD800ELL102ML35H by Nippon Chemi-con is a 1000uF, 80V aluminum electrolytic capacitor with tan delta of 0.08 and ESR of 27mohm. Ideal for applications requiring high ripple current (2052mA) and operating temperatures ranging from -40 to 135 °C.
EGPD350ELL242MU25H
ALUMINUM ELECTROLYTIC CAPACITOR; Dielectric Material: ALUMINUM (WET); Terminal Finish: MATTE TIN; JESD-609 Code: e3; No. of Terminals: 2;
EGPD800ELL112MM30H
EGPD800ELL112MM30H by Nippon Chemi-con is a fixed aluminum electrolytic capacitor with a capacitance of 1100 uF and a rated DC voltage of 80 V. It has a low tan delta of 0.08, making it suitable for applications requiring high ripple current and low leakage current.
EGPD350ELL302MU30H
ALUMINUM ELECTROLYTIC CAPACITOR; Dielectric Material: ALUMINUM (WET); No. of Terminals: 2; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
EGPD800ELL132ML40H
EGPD800ELL132ML40H by Nippon Chemi-con is a 1300 uF aluminum electrolytic capacitor with a rated DC voltage of 80V. It has a low tan delta of 0.08 and a leakage current of 3.12 mA, making it suitable for applications requiring high capacitance and low power loss.
EGPD800ELL132MM35H
EGPD800ELL132MM35H by Nippon Chemi-con is a 1300 uF aluminum electrolytic capacitor with a rated DC voltage of 80 V. It has a low tan delta of 0.08 and leakage current of 3.12 mA, making it suitable for applications requiring high ripple current and low ESR.
EGPD800ELL162MM40H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1600 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL751MK40H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 750 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD101ELL221MK25H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL102MU40H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1000 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL821MM25H
EGPD800ELL821MM25H by Nippon Chemi-con is a 820uF aluminum electrolytic capacitor with 80V rated DC voltage. It features low tan delta of 0.08, high ripple current of 1686mA, and low ESR of 33mohm. Ideal for applications requiring reliable energy storage in automotive electronics and industrial equipment.
EGPD800ELL271MK20H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 270 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL391MK25H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 390 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL681ML25H
EGPD800ELL681ML25H by Nippon Chemi-con is a 680uF Aluminum Electrolytic Capacitor with 80V URdc. It features a Tan Delta of 0.08, Leakage Current of 1.632mA, and Ripple Current of 1608mA. Ideal for applications requiring high capacitance and voltage stability in automotive electronics and industrial equipment.
EGPD800ELL751ML30H
EGPD800ELL751ML30H by Nippon Chemi-con is a fixed aluminum electrolytic capacitor with a capacitance of 750 uF and a rated DC voltage of 80 V. It has a low tan delta of 0.08, making it suitable for applications requiring high ripple current and low leakage current, such as automotive electronics.
EGPD800ELL471ML20H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL621MK35H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 620 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL621MM20H
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved