Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EGPD800ELL821MM25H by Nippon Chemi-con is a 820uF aluminum electrolytic capacitor with 80V rated DC voltage. It features low tan delta of 0.08, high ripple current of 1686mA, and low ESR of 33mohm. Ideal for applications requiring reliable energy storage in automotive electronics and industrial equipment.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Corohmni
$0.307
Aztec Data Supply Inc.
$0.510
AZTECH Wire
$16.216
Argo Parts USA
Bastille Electronics
Continental Prestige Electronics
Authorized Procurement Solutions
The use of aluminum as the dielectric material ensures high performance and durability.
A low tan delta value indicates minimal loss of energy, making this capacitor efficient.
With low leakage current, this capacitor maintains stable performance over time.
The high ripple current rating allows this capacitor to handle fluctuating loads with ease.
Bulk packaging provides cost savings for large-scale production.
Having 2 terminals simplifies the installation process.
The radial package style offers easy mounting and maintenance.
Wire terminals provide a secure connection for reliable operation.
The negative tolerance ensures consistent performance within a specified range.
The high maximum operating temperature range allows for use in various environments.
The terminal pitch spacing is ideal for standard PCB layouts.
The type of capacitor ensures high capacitance and long lifespan.
The low minimum operating temperature range makes this capacitor suitable for extreme conditions.
The matte tin finish on the terminals enhances conductivity and corrosion resistance.
The polarized design ensures proper orientation during installation.
a compact diameter allows for easy integration into various electronic devices.
A low ESR value indicates high efficiency and performance.
The through-hole mounting feature provides secure installation on PCBs.
The length of this capacitor fits well within standard equipment dimensions.
The positive tolerance ensures consistency and reliability in performance.
The high capacitance rating makes this capacitor suitable for various applications.
Compliance with the AEC-Q200 standard ensures high quality and reliability.
The high rated DC voltage allows this capacitor to be used in a wide range of voltage applications.
Fixed Capacitors EGPD800ELL821MM25H attributes and parameters. Explore more Fixed Capacitors devices from Nippon Chemi-con
Additional Features:
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Ripple Current (mA):
Tan Delta:
Terminal Finish:
Terminal Pitch:
Terminal Shape:
EGPD800ELL821MM25H Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.20
SB
Since its founding in 1931, Nippon Chemi-Con has worked on the development of various electronic components, starting with aluminum electrolytic capacitors. It is our greatest pleasure to be able to contribute to the development of cutting-edge industries as a member. Advances in globalization have ushered in a new era for the electronics industry. New markets are opening up on the world stage, new values are emerging, and new competition is beginning. Nippon Chemi-Con transforms itself at a speed that anticipates change, builds a highly mobile and flexible management system, and aims to be a company optimized for the times. This is because we believe that our primary mission is to always look at the times from the same point of view as our customers, read the next generation, and link it to product development as soon as possible. As we enter the century of the environment, there is a demand for eco-friendly products that are friendly to the earth and people. We believe that this era full of change is the perfect opportunity to make use of the technological capabilities we have cultivated over many years, and we will work with even greater determination to develop products that create the trends of the times. Nippon Chemi-Con will continue to take on the challenge of creating a prosperous future through the development of small electronic components.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Silicon Transistor
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1554216002
Molex
WIRE AND CABLE;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Synsemi
Crimson Semiconductor
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
LM358AN
National Semiconductor
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nexperia
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Bytesonic Electronics
C1206C105K5RACTU
KEMET Corporation
The KEMET C1206C105K5RACTU is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
ECA2AHG4R7
Panasonic
ECA2AHG4R7 by Panasonic is a 4.7uF Aluminum Electrolytic Capacitor with 100V URdc. It features Tan Delta of 0.08, Leakage Current of 0.0047mA, and Ripple Current of 38mA. Ideal for applications requiring high capacitance stability in temperatures ranging from -55 to 105°C such as automotive electronics meeting AEC-Q200 standard.
C0402C104K4RACAUTO
C0402C104K4RACAUTO by KEMET Corporation is a ceramic capacitor with a capacitance of 0.1 uF and rated DC voltage of 16 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This surface mount capacitor is commonly used in automotive applications, meeting the AEC-Q200 standard.
M39006/22-0377
Vishay Intertechnology
Vishay Intertechnology's M39006/22-0377 is a TANTALUM CAPACITOR with 68uF capacitance, 60V URdc, and 0.13 Tan Delta. Ideal for MIL-PRF-39006/22 applications requiring high ripple current (368.55mA) and low leakage current (0.002mA).
CGA3E2X8R1E104K080AA
TDK
TDK's CGA3E2X8R1E104K080AA is a ceramic capacitor with capacitance of 0.1uF, rated for 25V DC voltage. It has X8R temperature characteristics, -55 to 150°C operating range, and ±10% tolerance. Ideal for surface mount applications in automotive electronics meeting AEC-Q200 standard.
202R18W102KV4E
Johanson Dielectrics
202R18W102KV4E by Johanson Dielectrics is a ceramic capacitor with 0.001 uF capacitance and 2000 V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications due to its rectangular package shape and surface mounting feature.
02016D104KAT2A
KYOCERA AVX
02016D104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 6.3V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, ideal for SMT applications requiring compact size and high reliability in electronic circuits.
VJ0805Y104KXACW1BC
Vishay Bc Components
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
EMK325ABJ107MM-T
Taiyo Yuden
EMK325ABJ107MM-T by Taiyo Yuden is a ceramic capacitor with 100uF capacitance and 16V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high capacitance and voltage requirements.
UUD1H101MNL1GS
Nichicon
Nichicon UUD1H101MNL1GS is a 100uF aluminum electrolytic capacitor with 50V URdc. It features low tan delta of 0.14, high ripple current of 150mA, and -55 to 105°C operating temperature range. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact cylindrical package design.
GRT31CR61H106KE01L
Murata Manufacturing
Murata Manufacturing's GRT31CR61H106KE01L is a ceramic capacitor with 10uF capacitance, 50V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact SMT package design.
CC0402MRX5R5BB106
Yageo
Yageo's CC0402MRX5R5BB106 is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. With X5R temperature characteristics, it operates b/w -55°C to 85°C, ideal for surface mount applications in electronics requiring compact components with high capacitance stability.
CGA9P3X7S2A156M250KB
TDK CGA9P3X7S2A156M250KB is a rectangular package ceramic capacitor with 15uF capacitance and 100V rated DC voltage. It has a temperature coefficient of 22% and can operate b/w -55°C to 125°C. This capacitor is suitable for surface mount applications in automotive electronics (AEC-Q200).
12105C475K4Z2A
12105C475K4Z2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications requiring compact, high-performance capacitors with negative tolerance of 10%.
C1005X7R1C104K050BC
The TDK C1005X7R1C104K050BC is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size (1x0.5x0.5mm) and wraparound terminals for easy mounting in electronic devices.
CGA3E2X7R1H103K080AA
TDK's CGA3E2X7R1H103K080AA is a 0603 SMT ceramic capacitor with capacitance of 0.01uF, rated at 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for automotive applications meeting AEC-Q200 standard.
T491X107K025AT
T491X107K025AT by KEMET: Tantalum capacitor with 100uF capacitance, 25V rated DC voltage, and 0.08 Tan Delta. Ideal for applications requiring high ripple current handling in compact SMT designs.
12105C475K4T2A
12105C475K4T2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
0402ZD105KAT2A
0402ZD105KAT2A by KYOCERA AVX is a ceramic capacitor with 1uF capacitance, 10V URdc. X5R temperature code, -55 to 85°C operating range. SMT package for surface mount applications in electronics requiring compact design and reliable performance.
T491D106K035AT
KEMET T491D106K035AT is a 10uF, 35V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 155mA. Ideal for applications requiring compact SMT capacitors with high reliability and performance in a wide temperature range from -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EGPD800ELL102ML35H
Nippon Chemi-con
EGPD800ELL102ML35H by Nippon Chemi-con is a 1000uF, 80V aluminum electrolytic capacitor with tan delta of 0.08 and ESR of 27mohm. Ideal for applications requiring high ripple current (2052mA) and operating temperatures ranging from -40 to 135 °C.
EGPD800ELL511MK30H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 510 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD350ELL242MU25H
ALUMINUM ELECTROLYTIC CAPACITOR; Dielectric Material: ALUMINUM (WET); Terminal Finish: MATTE TIN; JESD-609 Code: e3; No. of Terminals: 2;
EGPD800ELL112MM30H
EGPD800ELL112MM30H by Nippon Chemi-con is a fixed aluminum electrolytic capacitor with a capacitance of 1100 uF and a rated DC voltage of 80 V. It has a low tan delta of 0.08, making it suitable for applications requiring high ripple current and low leakage current.
EGPD350ELL302MU30H
ALUMINUM ELECTROLYTIC CAPACITOR; Dielectric Material: ALUMINUM (WET); No. of Terminals: 2; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
EGPD800ELL132ML40H
EGPD800ELL132ML40H by Nippon Chemi-con is a 1300 uF aluminum electrolytic capacitor with a rated DC voltage of 80V. It has a low tan delta of 0.08 and a leakage current of 3.12 mA, making it suitable for applications requiring high capacitance and low power loss.
EGPD800ELL132MM35H
EGPD800ELL132MM35H by Nippon Chemi-con is a 1300 uF aluminum electrolytic capacitor with a rated DC voltage of 80 V. It has a low tan delta of 0.08 and leakage current of 3.12 mA, making it suitable for applications requiring high ripple current and low ESR.
EGPD800ELL162MM40H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1600 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL751MK40H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 750 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD101ELL221MK25H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL102MU40H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 1000 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL271MK20H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 270 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL391MK25H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 390 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL681ML25H
EGPD800ELL681ML25H by Nippon Chemi-con is a 680uF Aluminum Electrolytic Capacitor with 80V URdc. It features a Tan Delta of 0.08, Leakage Current of 1.632mA, and Ripple Current of 1608mA. Ideal for applications requiring high capacitance and voltage stability in automotive electronics and industrial equipment.
EGPD800ELL751ML30H
EGPD800ELL751ML30H by Nippon Chemi-con is a fixed aluminum electrolytic capacitor with a capacitance of 750 uF and a rated DC voltage of 80 V. It has a low tan delta of 0.08, making it suitable for applications requiring high ripple current and low leakage current, such as automotive electronics.
EGPD800ELL471ML20H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL621MK35H
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 620 uF; Rated DC Voltage (URdc): 80 V; Maximum Operating Temperature: 135 Cel; Dielectric Material: ALUMINUM (WET);
EGPD800ELL621MM20H
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved