Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The KEMET Corporation C1206C106K8RACTU is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 15% temp coef. Ideal for surface mount applications in electronics requiring compact size and high reliability.
Median Price
$0.139
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.322
100+ parts
$0.204
1k+ parts
$0.172
10k+ parts
-
Mouser Electronics
$0.800
$0.337
$0.141
$0.107
DigiKey
$0.850
$0.357
$0.291
Element14
$0.223
TTI Europe
$0.101
TTI
$0.095
Farnell
$0.150
$0.118
Arrow
$0.116
Verical
$0.096
Avnet
Chip1Stop
$0.135
Greenchips
$0.144
$0.137
$0.131
Nova Conductors
$0.215
Bristol Electronics
$0.600
$0.300
$0.120
$0.075
TME
$0.710
$0.254
$0.182
Sensible Micro Corp
Vyrian
Semi Source
Schukat
Rutronik
Semtec, LLC
Holdelec - ElecDif-Pro
SIE Connect GmbH - GreenChips
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Component Sense
PC Components Company LLC
North Shore Components
ComSIT Distribution GmbH
Connector Distribution Corp
Right Parts Inc.
Resion
Prism Electronics
Goldney Electronics S.L.
A2Z Electronics, Inc.
Microfarads
LWI Electronics Inc
Lantek
Decca Corp
$0.081
$0.079
Ampacity Inc.
Semicontronic
Argo Parts USA
$0.183
$0.177
Netroflash
$0.200
Advanced Electronics
$0.329
$0.312
Corohmni
$0.378
Aztec Data Supply Inc.
$0.481
Modulus Dynamics
$0.492
Continental Prestige Electronics
$0.099
Metaverse IC Inc.
Robosynatics
$0.143
$0.140
Lucentia Tech
GreenTree Electronics
iodParts Technologies Inc.
Resion (Excess)
Authorized Procurement Solutions
Allen Electronics Distributors
$0.090
Infinite Electronics LLP (Excess)
Ceramic is known for its high stability and reliability, making it a good choice for applications requiring consistent performance.
The rectangular shape allows for efficient placement on circuit boards, maximizing use of space.
Multi-layer construction increases capacitance in a small package size, ideal for compact electronic devices.
This packing method ensures the capacitors are protected during shipping and storage, reducing the risk of damage.
The 1206 size code indicates a standard size, making these capacitors compatible with a wide range of electronic devices.
With two terminals, these capacitors are easy to install and connect in circuits.
Surface mount technology allows for automated assembly, increasing productivity and efficiency in manufacturing.
The wraparound terminal shape provides a strong connection, reducing the risk of intermittent connections.
A negative tolerance of 10% ensures that the actual capacitance will not be lower than the specified value, guaranteeing reliable performance.
X7R temperature characteristics provide stable capacitance over a wide range of temperatures, making these capacitors suitable for various environments.
With a maximum operating temperature of 125°C, these capacitors can withstand high temperatures without sacrificing performance.
Ceramic capacitors are known for their low cost, high reliability, and stability, making them a popular choice for many applications.
With a minimum operating temperature of -55°C, these capacitors can function effectively in cold environments.
The low temperature coefficient of 15% ensures that the capacitance remains stable over a wide temperature range, enhancing overall performance.
The matte tin finish over nickel terminals provides excellent solderability, ensuring a strong and reliable connection in circuits.
The low profile height of 1.6 mm allows for compact design and easy integration into tight spaces.
The narrow width of 1.6 mm enables placement in confined areas, maximizing use of available space on circuit boards.
Surface mounting feature simplifies the assembly process, reducing production time and cost.
The length of 3.2 mm provides a balance between size and capacitance, making these capacitors versatile for various applications.
A positive tolerance of 10% ensures that the actual capacitance will not exceed the specified value, guaranteeing consistent performance.
With a capacitance of 10 uF, these capacitors are suitable for filtering, decoupling, and timing applications in electronic circuits.
The rated DC voltage of 10 V makes these capacitors suitable for low-voltage applications, providing adequate voltage handling capabilities.
Fixed Capacitors C1206C106K8RACTU attributes and parameters. Explore more Fixed Capacitors devices from KEMET Corporation
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
C1206C106K8RACTU Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.24.00.20
SB
KEMET Corporation is an American electronics company that specializes in the design, manufacturing, and distribution of capacitors, electromagnetic compatibility solutions, and other electronic components. The company was founded in 1919 and is headquartered in Fort Lauderdale, Florida, with manufacturing facilities and sales offices around the world. KEMET Corporation and its subsidiaries (KEMET), is a wholly owned subsidiary of Yageo Corporation (TAIEX: 2327).
CEO
William M. Lowe, Jr.
Executive VP & CFO
Gregory C. Thompson
Executive VP & President - TOKIN Corporation
Shigenori (Sean) Oyama
Advanced Tantalum Manufacturing
Fabrication
Fab Initiation
USA
Simpsonville
Wafer Capacity
382
FELCO
Chicago
Fort Lauderdale
61
Indonesia
Batam
68
China
Anting-Shanghai
73
Mexico
Matamoros
286
Ciudad Victoria
265
Guadalupe
Monterrey
532
San Nicolas
North Macedonia
Skopje
126
Plant A
Suzhou
353
Plant B
Xiamen
432
Italy
Pontecchio
226
Portugal
Evora
233
TOKIN
Vietnam
Biên Hòa City
174
Thailand
Hom Sin
Chachoengsao
171
Japan
Sendai
378
Toyama
Nyuzen
209
Shiroishi
Finland
Suomussalmi
56
Bulgaria
Kyustendil
86
Sweden
Farjestaden
28
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
Philips Components
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
C1608X5R1A106K080AC
TDK
The TDK C1608X5R1A106K080AC is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals for easy mounting in various electronic devices.
TMK107B7105KA-T
Taiyo Yuden
TMK107B7105KA-T by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for SMT applications due to its compact rectangular package design and wraparound terminals.
CL10B104KB8NNNL
Samsung Electro-mechanics
CL10B104KB8NNNL by Samsung Electro-mechanics is a 0603 SMT ceramic capacitor with 0.1uF capacitance and 50V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for applications requiring compact size and high reliability in various electronic circuits.
CL31B106KBHNNNE
Samsung Electro-mechanics CL31B106KBHNNNE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability.
LMK107BJ475KA-T
Taiyo Yuden's LMK107BJ475KA-T is a ceramic capacitor with 4.7uF capacitance and 10V URdc. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
C5750X6S2W225K250KA
C5750X6S2W225K250KA by TDK is a ceramic capacitor with 2.2uF capacitance and 450V rated DC voltage. It has X6S temperature characteristics, -55 to 105 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring high reliability and performance.
M39006/22-0565
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
08051C103KAT2A
KYOCERA AVX
08051C103KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 100V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
12065C104KAT2A
12065C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 3.2mm x 1.6mm x 0.94mm and wraparound terminals.
T491C475K025AT
KEMET Corporation
T491C475K025AT by KEMET: Tantalum capacitor with 4.7uF capacitance, 25V rated DC voltage, and 0.06 Tan Delta. Ideal for applications requiring compact SMT capacitors with low leakage current and high ripple current handling capabilities.
04025C102KAT2A
04025C102KAT2A by KYOCERA AVX is a ceramic capacitor with 0.001uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.56mm and wraparound terminals.
CC0402KRX7R6BB104
Yageo
Yageo CC0402KRX7R6BB104 is a 0402 SMT ceramic capacitor with capacitance of 0.1uF, rated for 10V. It has X7R temperature characteristics and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and stable performance across -55 to 125°C range.
GCM32EC71H106KA03L
Murata Manufacturing
Murata Manufacturing's GCM32EC71H106KA03L is a ceramic capacitor with 10uF capacitance, rated for 50V. It has X7S temperature characteristics and operates b/w -55 to 125 °C. Ideal for automotive applications meeting AEC-Q200 standard.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
GRM32ER71E226KE15L
Murata Manufacturing's GRM32ER71E226KE15L is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
GRM155R60J106ME15D
Murata Manufacturing's GRM155R60J106ME15D is a ceramic capacitor with 10uF capacitance, 6.3V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (1x0.5x0.5mm) and high reliability with a temperature coefficient of 15%.
02016D104KAT2A
02016D104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 6.3V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, ideal for SMT applications requiring compact size and high reliability in electronic circuits.
EEEFTE221XAP
Panasonic EEEFTE221XAP is a 220uF aluminum electrolytic capacitor with 25V URdc. It has a tan delta of 0.14 and ripple current of 390mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
M39006/22-0351
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C1812C105K5RACTU
KEMET C1812C105K5RACTU is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
C1206C104K5RACTU
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
C1206C104M5RACTU
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
C1206C104J5RACTU
KEMET C1206C104J5RACTU is a ceramic capacitor with 0.1uF capacitance, 50V rated DC voltage, and X7R temperature characteristics code. Ideal for surface mount applications in electronics requiring stable performance from -55 to 125°C. Features wraparound terminals and compact rectangular package design.
C1206C105K3RACTU
C1206C105K3RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 1 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
C1206C104K1RACTU
C1206C104K1RACTU by KEMET is a ceramic capacitor with 0.1uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and compact dimensions of 3.2mm x 1.6mm x 0.78mm.
C1206C106K3PACTU
KEMET C1206C106K3PACTU is a 10uF ceramic capacitor with X5R temp characteristics, 25V rated DC voltage. Ideal for SMT applications, it has a compact size of 1.6mm x 1.6mm x 3.2mm and operates b/w -55°C to 85°C, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
C1206C105K5RACTU
The KEMET C1206C105K5RACTU is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C1206C471J5GACTU
KEMET C1206C471J5GACTU is a ceramic capacitor with 0.00047uF capacitance and 50V URdc. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in temperatures ranging from -55 to 125 °C. With SMT package style and matte tin finish, it is ideal for surface mount installations in various electronic devices.
C1206F104K5RACTU
C1206F104K5RACTU by KEMET: Ceramic capacitor with 0.1uF capacitance, 50V URdc, X7R temp code. SMT package style for surface mount applications. Operating range -55 to 125 °C, with 10% tolerance.
C1206C106K3RACTU
KEMET C1206C106K3RACTU is a ceramic capacitor with 10uF capacitance, 25V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range. Ideal for SMT applications requiring compact size and high reliability.
C1206C475K5RACTU
C1206C475K5RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 4.7 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
C1206C102KGRACTU
KEMET C1206C102KGRACTU is a ceramic capacitor with 0.001uF capacitance and 2000V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring high voltage and stable performance.
C1206C106K4RACTU
KEMET C1206C106K4RACTU is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance from -55 to 125°C. Features wraparound terminals and compact rectangular package design.
C1206C476M8PACTU
KEMET C1206C476M8PACTU is a ceramic capacitor with 47uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 20% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and compact size of 3.2x1.6x1.6mm.
C1206C225K5RACTU
KEMET C1206C225K5RACTU is a ceramic capacitor with 2.2uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in electronics requiring compact fixed capacitors.
C1206C226M8RACTU
KEMET C1206C226M8RACTU is a ceramic capacitor with 22uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact rectangular package shape and wraparound terminals.
C1206C475K5PACTU
KEMET Corporation's C1206C475K5PACTU is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact rectangular package with multi-layer design.
C1206C107M9PACTU
KEMET Corporation's C1206C107M9PACTU is a ceramic capacitor with 100uF capacitance, 6.3V rated DC voltage, and X5R temperature characteristics. Ideal for surface mount applications in electronics due to its compact rectangular package and wraparound terminals. Operating temperature range from -55°C to 85°C makes it suitable for various electronic devices.
C1206F105K5RACTU
KEMET C1206F105K5RACTU is a ceramic capacitor with 1uF capacitance, 50V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125°C.
C1206C103K5RACTU
C1206C103K5RACTU by KEMET is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved