Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's GRM188R60J106ME47D is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and compact SMT package style. Ideal for applications requiring high capacitance in limited space like consumer electronics and automotive systems.
Median Price
$0.032
Lifecycle Status
Suppliers In-Stock
74
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.244
100+ parts
$0.232
1k+ parts
10k+ parts
-
Avnet
$0.011
Arrow
$0.014
Future Electronics
$0.050
Element14
$0.065
$0.057
$0.051
TTI Europe
$0.022
Chip1Stop
$0.033
$0.026
Verical
$0.045
Newark
$0.020
Farnell
$0.031
Distrelec
Greenchips
DF Sales Co.
$0.024
Freelance Electronics
TME
$0.060
$0.018
$0.015
Nova Conductors
$0.063
Maritex
$0.084
$0.019
$0.013
Bristol Electronics
$0.098
$0.049
$0.012
Component Electronics Inc.
$0.150
$0.120
$0.100
Classic Components Corporation
Component Sense
Vyrian
Chip Stock
ECAB
IBS Electronics
$0.147
NAC Semi
$0.102
Prism Electronics
Dan-Mar Components
Cyclops Electronics Ltd
Connector Distribution Corp
Right Parts Inc.
LIBRA Elektronik GmbH
Next Level Components, LLC
Sea View Technologies
EPE Components Inc.
Sensible Micro Corp
Semi Source
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
SPM Sales
Connect4Technologies Inc.
PC Components Company LLC
Rutronik
ComSIT Distribution GmbH
ComSIT USA
Atlantic Semiconductor
A2Z Electronics, Inc.
Speed Components Ltd
Global Solutions Electronics Company
Lantek
LWI Electronics Inc
Avant Electronics Limited
A&K Electronics
Flex Direct, LLC
Elcom Components
BCID Electronics Ltd.
Sunrise Surplus Inc.
Electronics Depot
North Shore Components
Zilex Electronics Inc.
Rebound Electronics
Goldney Electronics S.L.
Contempo Components LLC
Q Components
EMSNET
Ashlea Components Ltd
Holdelec - ElecDif-Pro
Velocity Electronics
Legend Electronics Inc.
SIE Connect GmbH - GreenChips
NPI Materials, Inc.
Semtec, LLC
Cogito LLC
NexGen Digital
Semicontronic
Argo Parts USA
$0.054
$0.052
Netroflash
Advanced Electronics
CoreStaff
$0.275
$0.108
Modulus Dynamics
$0.405
Aztec Data Supply Inc.
$0.417
Corohmni
$0.559
Perfect Parts
Abacus Technologies
GreenTree Electronics
$0.021
S.R.D Solutions
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
Cyclops Electronics Ltd (Excess)
Kepictronics
Speed Components Ltd (Excess)
Futuretech Components
Eastek
Robosynatics
$0.122
$0.119
Lucentia Tech
Formix International (Excess)
FE SAS
Ceramic material provides high dielectric strength, making the capacitor reliable and durable.
Rectangular shape allows for efficient packaging and space-saving on circuit boards.
Multi-layer design increases capacitance in a smaller footprint, ideal for compact electronic devices.
TR packaging with paper allows for easy handling and storage of the capacitors during transportation.
Two terminals enable easy and secure connection within a circuit.
Surface Mount Technology (SMT) package style allows for efficient placement on PCBs for automated assembly.
Wraparound terminals provide strong mechanical connection, reducing the risk of disconnection.
Negative tolerance ensures that the capacitor's capacitance does not fall below the specified value, maintaining performance consistency.
X5R code indicates a stable temperature coefficient, making the capacitor suitable for a wide temperature range.
Capacitor can operate reliably at high temperatures, suitable for industrial and automotive applications.
Ceramic capacitors are known for their stability, reliability, and low cost, making them a popular choice in various electronic circuits.
Capacitor can function in extremely low temperatures, making it suitable for harsh environmental conditions.
Low temperature coefficient ensures minimal capacitance change with temperature variations, maintaining stable performance.
Matte tin finish over nickel provides good solderability and corrosion resistance for reliable connections.
Low profile height allows for compact design and integration into slim electronic devices.
Narrow width saves space on PCBs, ideal for densely populated circuit boards.
Surface mount capability simplifies assembly processes and facilitates mass production of electronic devices.
Optimal length ensures a balanced form factor and compatibility with standard PCB layouts.
Positive tolerance ensures that the capacitor's capacitance does not exceed the specified value, maintaining consistent performance.
Capacitance value of 10 uF meets the requirements of various electronic circuits, providing sufficient energy storage.
Capacitor rated at 6.3 V DC voltage can handle typical operating voltages in electronic circuits, ensuring proper functionality.
Fixed Capacitors GRM188R60J106ME47D attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
GRM188R60J106ME47D Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - GRM Series Production Capacity 31/Jul/2023
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ATMEGA328P-AU
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Micro Commercial Components
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39006/25-0248
Vishay Intertechnology
Vishay Intertechnology's M39006/25-0248 is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 486mA ripple current. Ideal for MIL-PRF-39006/25 applications requiring -55 to 125 °C operating temperature range and polarized terminals.
T491D106K050AT
KEMET Corporation
KEMET T491D106K050AT is a 10uF, 50V tantalum capacitor with low Tan Delta of 0.06 and ESR of 800mohm. Ideal for applications requiring high ripple current (173mA) and operating temperatures from -55 to 125°C in surface mount designs.
C0603C104K4RACAUTO
KEMET C0603C104K4RACAUTO is a ceramic capacitor with 0.1uF capacitance, 16V URdc, X7R temp code. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating range. SMT package style, compact size of 1.6x.8x.8mm make it suitable for surface mount designs.
C3225X7S2A475M200AB
TDK
TDK C3225X7S2A475M200AB is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. Featuring X7S temperature characteristics, it operates b/w -55 to 125 °C, with ±20% tolerance. Ideal for surface mount applications requiring compact rectangular package design.
GRM21BR6YA106KE43L
Murata Manufacturing
Murata Manufacturing's GRM21BR6YA106KE43L is an 0805 SMT ceramic capacitor with 10uF capacitance and 35V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and reliable performance in various electronic devices.
C0805C102K5RACTU
KEMET C0805C102K5RACTU is a ceramic capacitor with 10% negative tolerance, X7R temperature characteristics, and 0.001 uF capacitance. Ideal for surface mount applications in electronics, it operates b/w -55 to 125 °C with a rated DC voltage of 50 V.
M39006/22-0360
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 160 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
08055C105K4T2A
KYOCERA AVX
08055C105K4T2A by KYOCERA AVX is a SMT ceramic capacitor with 1uF capacitance, 50V URdc, X7R temp code, and -55 to 125 °C operating range. Ideal for automotive applications due to AEC-Q200 standard compliance and compact size for surface mount installation.
C0603C221J5GACTU
The KEMET C0603C221J5GACTU is a ceramic capacitor with 0.00022uF capacitance and 50V URdc. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance over a wide temperature range. With SMT package style and compact dimensions of 1.6mm x 0.8mm x 0.8mm, it is ideal for space-constrained electronic devices.
CC0402JRNPO9BN100
Yageo's CC0402JRNPO9BN100 is a ceramic capacitor with 0.00001uF capacitance and 50V URdc. It has C0G temp characteristics, -55 to 125 °C operating range, and ±5% tolerance. Ideal for SMT applications due to its small 0402 size and multi-layer design.
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/250072
Cornell Dubilier Electronics
M39006/250072 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 702mA ripple current. It is polarized, has a tan delta of 0.37, and operates b/w -55 to 125 °C. Ideal for applications requiring high reliability in military or aerospace sectors.
GRM188R61E106KA73D
Murata Manufacturing's GRM188R61E106KA73D is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C, with ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
GRM188R71H102KA01D
GRM188R71H102KA01D by Murata Manufacturing is a ceramic capacitor with a capacitance of 0.001 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
UMK107B7474KA-TR
Taiyo Yuden
UMK107B7474KA-TR by Taiyo Yuden is a ceramic capacitor with 0.47uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high reliability and stability in various electronic devices.
M39006/25-0220
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Additional Features: RIPPLE CURRENT IS MEASURED AT 85CEL;
C5750X7S2A106M230KB
The TDK C5750X7S2A106M230KB is a ceramic capacitor with 10uF capacitance and 100V rated DC voltage. With X7S temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications due to its rectangular package shape and wraparound terminals.
GRM21BR61H475KE51L
Murata Manufacturing's GRM21BR61H475KE51L is a ceramic capacitor with 4.7uF capacitance and 50V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 2x1.25x1.25mm, making it suitable for various electronic devices requiring stable capacitance performance.
C0402C101J5GACTU
KEMET C0402C101J5GACTU is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance over a wide temperature range. With compact dimensions of 1mm x 0.5mm x 0.5mm, it is ideal for surface mount designs in various electronic devices.
06035C104K4T4A
06035C104K4T4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, X7R temperature coefficient, and 10% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and 50V rated DC voltage.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GRM155R71H103KA88D
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
GRM155R71C104KA88D
Murata Manufacturing's GRM155R71C104KA88D is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
GRM188R61C106KAALD
GRM188R61C106KAALD by Murata Manufacturing is a ceramic capacitor with a capacitance of 10 uF and a rated DC voltage of 16 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
GRM188R71H103KA01D
The Murata Manufacturing GRM188R71H103KA01D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. Featuring X7R temperature characteristics, it has a negative tolerance of 10% and positive tolerance of 10%. This SMT capacitor is ideal for applications requiring compact size and high reliability in electronic circuits.
GRM155R71H104KE14D
GRM155R71H104KE14D by Murata is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact components with stable performance.
GRM188R71A225KE15D
GRM188R71A225KE15D by Murata is a ceramic capacitor with 2.2uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
GRM188R71H104KA93D
Murata Manufacturing's GRM188R71H104KA93D is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and surface mounting feature.
GRM1555C1H101JA01D
GRM1555C1H101JA01D by Murata is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in a wide temperature range. With SMT package style, it is ideal for compact electronic devices needing high-quality capacitors.
GRM155R61A105KE15D
Murata Manufacturing's GRM155R61A105KE15D is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
GRM155R61E105KA12D
Murata Manufacturing's GRM155R61E105KA12D is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
GRM155R71E103KA01D
Murata Manufacturing's GRM155R71E103KA01D is a ceramic capacitor with 0.01uF capacitance and 25V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
GRM1555C1H102JA01D
Murata Manufacturing's GRM1555C1H102JA01D is a ceramic capacitor with 0.001uF capacitance and 50V URdc. It has C0G temperature characteristics, -55 to 125°C operating range, and ±5% tolerance. Ideal for SMT applications requiring compact size and stable performance in various electronic circuits.
GRM1885C1H101JA01D
Murata Manufacturing's GRM1885C1H101JA01D is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in temperatures ranging from -55 to 125 °C. With SMT package style, it is ideal for compact electronic devices.
GRM155R71C103KA01D
The Murata Manufacturing GRM155R71C103KA01D is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 16V. It has a temperature coefficient of 15ppm/°C, suitable for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125 °C.
GRM188R71E105KA12D
Murata Manufacturing's GRM188R71E105KA12D is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact rectangular package design.
GRM188R72A104KA35D
Murata Manufacturing's GRM188R72A104KA35D is a ceramic capacitor with 0.1uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
GRM188R61A106KE69D
Murata Manufacturing's GRM188R61A106KE69D is a 0603 SMT ceramic capacitor with 10uF capacitance and 10V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in various electronic devices.
GRM155R71H102KA01D
Murata Manufacturing's GRM155R71H102KA01D is a ceramic capacitor with 0.001uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.5mm, wraparound terminals, and multi-layer design.
GRM188R61A226ME15D
GRM188R61A226ME15D by Murata is a 0603 SMT ceramic capacitor with 22uF capacitance and 10V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±20% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in various electronic devices.
GRM188R60J106M
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved