Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 78250; Approvals (V): UL; Length: 9.52 mm; Width: 8.89 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
J2 Sourcing AB
1+ parts
100+ parts
1k+ parts
10k+ parts
Corel Iberica Componentes, S.L.
Cyclops Electronics Ltd (Excess)
Pulse & Datacom Transformers 78250 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Newport Components
Application:
Approvals (V):
Minimum ET Product:
Height:
Isolation Voltage:
Length:
Manufacturer Series:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Inductance (Primary):
Transformer Type:
Width:
78250 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
NSN
3110-00-100-3666, 3110001003666, 5306-00-639-5213, 5306006395213, 5962-00-276-5514, 5962002765514, 5999-00-401-0402, 5999004010402, 6625-00-148-8102, 6625001488102, 9905-14-376-3849, 9905143763849
NIIN
001003666, 006395213, 002765514, 004010402, 001488102, 143763849
Newport Components - C and D Technologies - Murata PS Company Overview Newport Components was acquired by C&D Technologies December 2000. C&D Technologies, Inc. is a technology company that produces and markets systems for the power conversion and storage of electrical power, including industrial batteries and electronics. This specialized focus has established the company as a leading and valued supplier of products in three major categories - reserve power systems, electronic power supplies and material handling systems. C&D's success in these key markets has been supported by dedication to customer service. Approximately 70 percent of the company's current sales are reserve power systems supplied to leading operators of telecommunications, data transmission, infrastructure computer systems and utilities to enable them to maintain critical operations during power outages. The Power division of C&D Technologies was acquired by Murata Power Solutions in 2007.
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
Nexperia
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
ISRF-0239-D502
Schurter Ag
ISRF-0239-D502 by Schurter Ag is a pulse transformer with an isolation voltage of 3200V and max pulse rise time of 500ns. With primary inductance of 1600uH, it operates b/w -25°C to 100°C. Ideal for datacom applications, this surface mount transformer has dimensions of L22.7xB22.3xH14.0mm.
100B-1003XNLT
Pulser
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); No. of Functions: 1; Packing Method: TR; Dimensions: L12.7XB6.73XH5.97 (mm);
14255R-100
Dialog Semiconductor
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 1; Length: 17 mm; Packing Method: TR, 13 INCH; Maximum Operating Temperature: 85 Cel;
HX5120NL
Pulse Electronics
HX5120NL by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. Featuring primary inductance of 350uH, it operates b/w -40 to 85°C. Ideal for surface mount applications, this transformer has dimensions of L16.51xB9.14xH2.08 mm.
7490140123B
Wuerth Elektronik & Kg
7490140123B by Wurth Elektronik is a DATACOM TRANSFORMER with 4500V isolation voltage, 350uH inductance, and UL approval. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 85°C and features a compact size of 8.4mm x 14.75mm x 17.1mm for surface mount installation.
1001C
Murata Manufacturing
1001C by Murata Manufacturing is a pulse transformer with an isolation voltage of 2000 V, inductance of 3000 uH, and min ET product of 200 V-us. It is designed for applications requiring high voltage isolation and precise signal transmission, commonly used in data communication systems and power supplies.
HCTSM80101AALE1
Bourns HCTSM80101AALE1 pulse transformer offers 5000V isolation voltage, 250uH inductance, and 1:1 turns ratio. Ideal for AEC-Q200 approved applications requiring high isolation and temperature range from -40 to 125°C. Suitable for surface mount with dimensions of 6.5x10.8x12.3mm, it is commonly used in datacom systems.
100B-1003XNL
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Width: 6.98 mm; Length: 12.95 mm; Dimensions: L12.7XB6.73XH5.97 (mm);
750311457
Wurth Elektronik 750311457 is a Datacom Transformer with 2 primary windings, 50uH inductance, and 2500V isolation voltage. It has dimensions of L17.75xB13.46xH12.7 mm and operates b/w -40 to 125 °C. Ideal for applications requiring a transformer with a turns ratio of 4:1, output current up to 4A, and max input voltage of 36V.
HM2102NLT
HM2102NLT by Pulse Electronics is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 4300V. With inductance of 450uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high voltage isolation.
74050
Pico Electronics
The Pico Electronics 74050 pulse transformer features an isolation voltage of 500V, inductance of 3700uH, and min ET product of 50V-us. Ideal for MIL-PRF-21038 approved applications requiring reliable data transmission and pulse signal processing in a compact L11.43xB11.43xH7.11 mm package.
DA2320-ALD
Coilcraft
Coilcraft's DA2320-ALD is a pulse transformer with 1500V isolation voltage, 264uH primary inductance, and 24.5 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 125 °C and features surface mounting with dimensions of L6.6xB5.0xH5.4 mm.
DA2319-ALD
Coilcraft's DA2319-ALD is a pulse transformer with 1500V isolation voltage and 296uH primary inductance. Ideal for gate drive applications, it operates b/w -40 to 125°C, with dimensions of L6.6xB5.0xH5.4mm and a turns ratio of 1:1 for surface mounting.
78253/35MC
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78253; Terminal Finish: Tin (Sn); Length: 9.52 mm; Width: 8.89 mm;
H0068ANLT
H0068ANLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It has dimensions of L12.7xB8.81xH2.08 (mm) and is designed for LAN, 10/100 BASE-TX, and Ethernet applications. Operating temperature ranges from 0 to 70°C, making it suitable for various networking environments.
HX1188NL
HX1188NL by Pulse Electronics is a Datacom Transformer with an Isolation Voltage of 1650V, Inductance of 350uH, and Turns Ratio of 1:1. It is designed for surface mount applications in data communication and networking equipment due to its compact dimensions (L12.7xB7.11xH5.97 mm) and wide operating temperature range (-40 to 85°C).
1029
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Length: 15.06 mm; Dimensions: 15.06mm X 15.06mm X 15.75mm;
78250VC
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 78250; Terminal Finish: Bright Tin (Sn); Inductance (Primary): 1000 uH; JESD-609 Code: e3;
M21038/27-29T
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27; Height: 6.35 mm; Application: GENERAL PURPOSE; No. of Functions: 1;
74015
The Pico Electronics 74015 is a pulse transformer with an isolation voltage of 500V and inductance of 1300uH. It is approved for MIL-PRF-21038 and commonly used in pulse and datacom applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Newport Components
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved