Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NC7SZ66M5 by National Semiconductor is a SPST multiplexer with 5 terminals in a small outline package. It has a rectangular shape, gull wing terminals, and 1.2mm seated height. Ideal for compact electronic devices requiring signal switching in tight spaces.
Median Price
$0.617
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.595
1k+ parts
$0.493
10k+ parts
$0.440
DigiKey
$0.740
Verical
$0.550
Digiode
$0.463
Nova Conductors
$0.505
Freelance Electronics
$0.698
$0.733
$0.691
Chip Stock
DigiKey Marketplace
Vyrian
Bristol Electronics
Anansix
Pride Electronics
J2 Sourcing AB
Prism Electronics
Q Components
PC Components Company LLC
Extreme Components
A2Z Electronics, Inc.
Cyclops Electronics Ltd
First Choice Components Inc.
Ampacity Inc.
$0.414
Corphita
$0.438
Continental Prestige Electronics
$0.495
Argo Parts USA
$0.490
Perfect Parts
Netroflash
$0.480
$0.470
Supply Digital
Microchip USA
Kepictronics
The use of plastic/epoxy material for the package body ensures durability and resistance to external elements, making this product suitable for long-term use in various environments.
Being surface mountable allows for easy and efficient installation on circuit boards, saving space and simplifying the manufacturing process.
The rectangular package shape is commonly used for multiplexers and switches, providing a compact design that fits well within electronic devices and systems.
With 5 terminals, this multiplexer/switch offers versatility in connecting multiple input and output signals, allowing for various signal routing options.
The small outline, thin profile, and shrink pitch package style ensures that this product takes up minimal space on the circuit board, making it ideal for applications where board space is limited.
Dual terminal positions provide additional flexibility in circuit layout and connection options, allowing for optimized signal routing and reduced signal interference.
The low maximum seated height of 1.2 mm contributes to the overall compactness of the product, making it suitable for applications with tight space constraints.
The narrow width of 1.6 mm allows for efficient use of space on the circuit board, enabling dense packing of components and overall system miniaturization.
The SPST (Single Pole Single Throw) IC type offers basic on/off functionality, making this product suitable for simple signal switching applications.
The compact length of 2.9 mm further contributes to the space-saving design of this product, ensuring efficient utilization of board space.
The gull wing terminal form provides mechanical stability and ease of soldering during assembly, enhancing the reliability and manufacturability of the product.
The small terminal pitch of 0.95 mm allows for high-density mounting of the multiplexer/switch on the circuit board, facilitating compact and space-efficient designs.
Multiplexers & Switches NC7SZ66M5 attributes and parameters. Explore more Multiplexers & Switches devices from National Semiconductor
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
NC7SZ66M5 Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
National Semiconductor
Won-top Electronics
Bkc Semiconductors
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
Renesas Electronics
Philips Semiconductors
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
ADG721BRMZ-REEL7
Analog Devices
ADG721BRMZ-REEL7 by Analog Devices is a CMOS SPST switch with 2 functions, operating at -40 to 85°C. It has a max on-state resistance of 10 ohm and offers separate outputs. Ideal for industrial applications requiring a compact, low-power solution with high isolation levels.
MAX14662ETI+
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
MC14066BDTR2G
MC14066BDTR2G by Onsemi is a CMOS SPST multiplexer with 4 functions, operating at -55 to 125 °C. It has a supply voltage range of 3-18 V and offers separate outputs with an on-state resistance of 1050 ohm. Ideal for military-grade applications requiring high isolation and fast switching times.
TS5A23159DGSRE4
TS5A23159DGSRE4 by Texas Instruments is a 2-function SPDT switch with 1.8/5V power supplies, 2.5 ohm max on-state resistance, and 64dB nominal off-state isolation. Ideal for industrial applications, it operates b/w -40 to 85°C with a compact design of 3x3mm and 0.5mm terminal pitch for space-constrained PCBs.
ADG619BRTZ-REEL7
ADG619BRTZ-REEL7 by Analog Devices is an 8-terminal SPDT CMOS switch with a max on-state resistance of 6.5 ohm and common output. It operates at industrial temperature grades from -40 to 85 °C, making it suitable for applications requiring low-profile switches with high isolation levels.
ADG749BKSZ-REEL7
ADG749BKSZ-REEL7 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 12 ohm and switching time of 15 ns. Ideal for automotive applications due to its compact size, low power consumption, and high isolation level of 87 dB.
DG419DJ-E3
Vishay Intertechnology
Vishay Intertechnology's DG419DJ-E3 is an 8-terminal SPDT CMOS switch with a max on-state resistance of 35 ohm. Operating b/w -40 to 85 °C, it has a peak reflow temperature of 260C and switching voltage of +/-15 V. Ideal for industrial applications requiring fast response times and precise signal routing.
74HC4067DB,118
NXP Semiconductors' 74HC4067DB,118 is a CMOS multiplexer with 16 channels and a max supply voltage of 10V. It features a nominal off-state isolation of 50dB, on-state resistance match of 6 ohm, and peak reflow temperature of 260°C. Ideal for automotive applications due to its small outline package and dual terminal position.
CD74HC4067MG4
CD74HC4067MG4 by Texas Instruments is a CMOS multiplexer with 24 terminals, operating voltage of 2-6V, and on-state resistance of 270 ohm. It is ideal for military-grade applications requiring a bandwidth of 89 kHz, common output, and break-before-make switching.
DG408DY
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4051D,652
NXP Semiconductors' 74HC4051D,652 is an 8-channel CMOS multiplexer with a max supply voltage of 10V. It features a max on-state resistance of 180 ohm and switching type is break-before-make. Ideal for automotive applications due to its temperature grade and small outline package style.
ADG419BRZ
ADG419BRZ by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of +/-15 V. Ideal for applications requiring high off-state isolation (80 dB) and fast switching times (160 ns).
HEF4051BTD
DG408DY-T1
Temic Semiconductors
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
CD4052BPWRG4
CD4052BPWRG4 by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at temperatures from -55 to 125 °C. It has a max on-state resistance of 1050 ohm and a nominal bandwidth of 25 kHz. Ideal for military-grade applications requiring high isolation and low signal current consumption.
77052012A
Analog Devices 77052012A is a CMOS single-ended multiplexer with 8 channels, MIL-STD-883 screening, and ceramic-metal-sealed co-fired package. It operates at -55 to 125 °C with +-15 V supplies, 1000 ohm max on-state resistance, and 0.001 A signal current. Ideal for military applications requiring high isolation and low on-state resistance.
HEF4051BTD by NXP Semiconductors is an 8-channel single-ended multiplexer with a max on-state resistance of 175 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage range of 3-15 V. Ideal for applications requiring high-speed switching such as signal routing in electronic circuits.
Vishay Intertechnology's DG408DY is a CMOS multiplexer with 8 channels, 100 ohm max on-state resistance, and 150 ns switch-on/off time. Ideal for industrial applications requiring a small outline package, it operates b/w -40 to 85 °C with a supply voltage range of +/-5V to +/-15V.
DG403DY-T1-E3
Vishay Intertechnology's DG403DY-T1-E3 is a CMOS SPDT switch with 2 functions, 16 terminals, and max on-state resistance of 45 ohm. With a supply voltage range of ±15V and industrial temperature grade, it suits applications requiring fast switching times like signal routing in industrial electronics.
CBTL04083ABS,518
NXP Semiconductors' CBTL04083ABS,518 is a 4-function differential multiplexer with 2 channels and 42 terminals. Operating at -40 to 85°C, it has a supply voltage of 3.3V and max current of 5mA. Ideal for industrial applications requiring high-temperature resistance and precise signal switching in compact chip carrier packages.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NC7SB3157P6X
The Onsemi NC7SB3157P6X is a SPDT multiplexer with 6 terminals, operating at -40 to 85°C. It has a supply voltage range of 1.65-5.5V and offers common output with 30 ohm on-state resistance. Ideal for industrial applications requiring fast switching times (13ns on, 7ns off) and high isolation (57dB).
Fairchild Semiconductor
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NC7SB3157P6X_NL
Fairchild Semiconductor's NC7SB3157P6X_NL is a SPDT multiplexer with 2.3V nominal voltage, 30 ohm max on-state resistance, and 13ns switch-on time. It is ideal for industrial applications requiring common output switching at temperatures ranging from -40 to 85°C.
NC7SB3157P6X-F40
Multiplexers or Switches; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
NC7SZ66M5X
SPST; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
The Onsemi NC7SZ66M5X is a CMOS SPST switch with 1.8V nominal voltage and 60 ohm max on-state resistance. Ideal for industrial applications, it offers 50dB off-state isolation and operates b/w -40 to 85°C. With a small outline package and dual terminals, it suits compact designs requiring fast switching speeds.
NC7SZ66P5X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
The Onsemi NC7SZ66P5X is a CMOS SPST switch with 1 channel and a max supply voltage of 5.5V. It has a small outline, thin profile package style and is suitable for industrial temperature grades. Its key specifications include a max on-state resistance of 60 ohm and an off-state isolation of 50 dB.
NC7SZ66M5X_NL
NC7SZ66M5X_NL by Fairchild Semiconductor is a CMOS SPST switch with 5 terminals, operating at temperatures from -40 to 85°C. It has a low profile rectangular package with matte tin finish and shrink pitch style. With a max on-state resistance of 30 ohms and fast switching times of 7-9 ns, it is ideal for industrial applications requiring high-speed signal multiplexing.
NC7SB3157L6X
The Onsemi NC7SB3157L6X is a SPDT switch with 30 ohm Ron, 13 ns switch-on time, and 57 dB isolation. It operates at -40 to 85°C and has a supply voltage range of 1.65-5.5 V. Ideal for industrial applications requiring fast switching in compact designs.
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NC7SZ66P5X_NL
Fairchild Semiconductor's NC7SZ66P5X_NL is a CMOS SPST switch with 30 ohm Ron, 7 ns switch-on time, and 9 ns switch-off time. It operates b/w -40 to 85 °C and has a supply voltage range of 1.65V to 5.5V. Ideal for industrial applications requiring fast switching in compact designs.
NC7SBU3157P6X
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NC7SZ66L6X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
The Onsemi NC7SZ66L6X is a SPST multiplexer with 6 terminals, operating at a supply voltage range of 1.65V to 5.5V. It features a max on-state resistance of 60 ohm and offers an off-state isolation of 50 dB. Ideal for industrial applications requiring fast switching times and low power consumption in compact designs.
NC7SBU3157P6X_NL
NC7SZ66M5
NC7SZ66M5X_NF40
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved