Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADG736BRMZ by Analog Devices is a CMOS SPDT switch with 2 functions, operating at a supply voltage of 1.8-5.5V. With a max on-state resistance of 12 ohm and switching time of 20 ns, it is ideal for automotive applications requiring fast and efficient signal routing in compact spaces.
Median Price
$4.083
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Verical
1+ parts
$1.850
100+ parts
-
1k+ parts
10k+ parts
Farnell
$3.530
$1.920
$1.590
Chip1Stop
$3.580
$2.420
$2.300
Arrow
$3.996
$2.351
$2.028
DigiKey
$4.170
$2.623
$2.343
$2.273
Mouser Electronics
$2.620
$2.330
$2.270
Newark
$2.400
Analog Devices Inc
$5.150
$2.363
Element14
$5.730
$4.220
$3.600
$2.770
Distrelec
Richardson RFPD
$2.150
Nova Conductors
$2.099
Digiode
$2.109
NAC Semi
$14.490
$11.750
Chip Stock
Dynamic Solutions
VNN
Vyrian
Cyclops Electronics Ltd
ComSIT Distribution GmbH
ECAB
Bristol Electronics
Ack Elektronik San.Tic.Ltd.Sti
Speed Components Ltd
Sea View Technologies
Prism Electronics
Atlantic Semiconductor
Electronics Depot
Goldney Electronics S.L.
Advanced Electronics
$1.530
$1.453
Semicontronic
$1.800
$1.755
$1.746
Ampacity Inc.
Corphita
$1.998
Argo Parts USA
$2.098
Netroflash
Continental Prestige Electronics
$3.110
$2.290
$1.550
Parana Technologies
$15.139
$14.080
IDEA Electronic Components Group
$16.279
$15.465
Corohmni
$18.049
Aztec Data Supply Inc.
$18.940
Microchip USA
$23.530
DigiPath Technology Company
$25.395
$24.379
Perfect Parts
Alle Elektronik GmbH
Authorized Procurement Solutions
A-Z Elektronik GmbH
Kepictronics
Cyclops Electronics Ltd (Excess)
GreenTree Electronics
Pacific Micro-Tech
Infinite Electronics LLP (Excess)
S.R.D Solutions
The use of plastic/epoxy material ensures durability and reliability of the product in various environmental conditions.
The 3 V nominal supply voltage provides optimal power efficiency for the multiplexers and switches.
The high maximum operating temperature of 125°C allows the product to function reliably in extreme heat conditions.
The CMOS technology used in the product ensures low power consumption and high noise immunity, making it a reliable choice for electronic applications.
The ability to handle a maximum signal current of 0.03 A ensures stable and efficient signal transmission in the device.
Multiplexers & Switches ADG736BRMZ attributes and parameters. Explore more Multiplexers & Switches devices from Analog Devices
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Signal Current:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
ADG736BRMZ Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - 8/10L MSOP Products Assembly Transf 26/Oct/2015
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Crimson Semiconductor
Daco Semiconductor
Philips Semiconductors
ADG5404BRUZ-REEL7
Analog Devices
ADG5404BRUZ-REEL7 by Analog Devices is a CMOS multiplexer with 4 channels, 16 ohm max resistance, and 78 dB isolation. It operates in automotive grade applications at -40 to 125 °C, with a supply voltage range of +-9/+-22 V. Ideal for signal switching in compact designs due to its small outline package.
TS3A44159RGTR
Texas Instruments
TS3A44159RGTR by Texas Instruments is a CMOS SPDT switch with 2 functions, 4 channels, and 0.8 ohm max on-state resistance. Operating at -40 to 85 °C, it has a nominal bandwidth of 35 kHz. Ideal for industrial applications requiring high isolation and low on-state resistance.
74HC4051DB,112
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG413DYZ-T
Intersil
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LVC2G66DCURG4
SN74LVC2G66DCURG4 by Texas Instruments is a CMOS SPST switch with 2 channels, 30 ohm Ron, and 5.6 ns switch-on time. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package for space-constrained applications. Ideal for multiplexing signals in systems requiring low power consumption (Isup: 0.015 mA).
ADG708BRUZ-REEL7
ADG708BRUZ-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at -40 to 125 °C and has a max on-state resistance of 4.5 ohm. Ideal for automotive applications, it features a small outline package with dual terminals and common output voltage.
ADG738BRUZ-REEL7
ADG738BRUZ-REEL7 by Analog Devices is an 8-channel audio/video switch with a max on-state resistance of 11 ohm and switching voltage of 5.5 V. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package suitable for surface mount applications.
DG442DY
Vishay Intertechnology's DG442DY is a CMOS SPST multiplexer with 4 functions, -40 to 85°C operating temp, and 15V supply voltage. With a small outline package style, it suits industrial applications requiring separate output and break-before-make switching.
MAX399ESE
Maxim Integrated
MAX399ESE by Maxim Integrated is a CMOS differential multiplexer with 4 channels, 2 functions, and a max on-state resistance of 100 ohm. It operates in industrial temperature grades from -40 to 85 °C and has a small outline package suitable for surface mount applications. With a nominal voltage of +-5 V, it offers reliable signal switching with break-before-make functionality.
CD4051BE
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NXP Semiconductors
NXP Semiconductors' 74HC4051DB,112 is an 8-channel CMOS multiplexer with a max supply voltage of 10V. It features a max on-state resistance of 180 ohm and switching type is break-before-make. Ideal for automotive applications due to its temperature grade and small outline package style.
74HC4051D-T
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1611BRUZ
ADG1611BRUZ by Analog Devices is a CMOS SPST switch with 4 functions, operating at -40 to 125°C. With a small outline package and separate output, it has a max on-state resistance of 1.2 ohm and switching time as low as 159 ns. Ideal for automotive applications requiring high isolation and fast switching capabilities.
ADG1419BCPZ-REEL7
ADG1419BCPZ-REEL7 by Analog Devices is a SPDT multiplexer with 8 terminals, operating voltage of +-5/+-15/12V. It has a max on-state resistance of 3.2 ohm and switching time of 140 ns. Ideal for automotive applications due to its BICMOS technology and high off-state isolation of 64 dB.
MPC506AU/1KG4
The Texas Instruments MPC506AU/1KG4 is a CMOS single-ended multiplexer with 16 channels. It operates at temperatures ranging from -40 to 85°C and has a max on-state resistance of 1500 ohm. This small outline package switch is ideal for industrial applications requiring high isolation and fast switching times.
ADG704BRMZ-REEL7
ADG704BRMZ-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of 1.8V to 5.5V and offers a max on-state resistance of 8 ohm. With industrial temperature grade, it's ideal for applications requiring fast switching speeds and high off-state isolation.
DG408DY+
Analog Devices' DG408DY+ is a CMOS multiplexer with 8 channels, 100 ohm max on-state resistance, and 225 ns switch-on time. Ideal for industrial applications requiring a small outline package, -40 to 85°C operating range, and break-before-make switching.
74HC4052DB,118
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
PCA9546APWRE4
PCA9546APWRE4 by Texas Instruments is a 16-terminal multiplexer with a supply voltage range of 2.3V to 5.5V, offering separate outputs and low on-state resistance of 45 ohm. Ideal for applications requiring signal routing in compact spaces due to its small outline, thin profile package style and dual terminal position.
PTPS2116DRLR
PTPS2116DRLR by Texas Instruments is a small outline, very thin profile multiplexer with 2 channels. It operates b/w -40 to 125°C and has a common output with 0.04 ohm max on-state resistance. Ideal for applications requiring dual terminal position switching at supply voltages ranging from 1.6V to 5.5V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADG706BRUZ
ADG706BRUZ by Analog Devices is a 28-terminal SPST multiplexer with 16 channels. It operates at -40 to 85°C, with a max on-state resistance of 4.5 ohm and switching time of 50 ns. Ideal for industrial applications requiring high-speed signal switching in compact designs.
ADG704BRMZ
ADG704BRMZ by Analog Devices is a CMOS multiplexer with 4 channels, 10 terminals, and a max supply voltage of 5.5V. It operates in industrial temperature range (-40 to 85 °C) and has a common output. Ideal for applications requiring fast switching with low on-state resistance (8 ohm) and high off-state isolation (60 dB).
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG719BRTZ-REEL7
ADG719BRTZ-REEL7 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 12 ohm and switching voltage of 5.5 V, suitable for automotive applications due to its low profile design and high isolation level of 67 dB.
ADG733BRUZ
ADG733BRUZ by Analog Devices is a 3-function multiplexer and switch with a supply voltage range of 2.25V to 2.75V. It has a small outline, thin profile package style and can operate in industrial temperature conditions (-40°C to 85°C). This IC is commonly used for signal routing and switching applications.
ADG779BKSZ-REEL7
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG708BRUZ
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG704BRMZ-REEL
ADG704BRMZ-REEL by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of 1.8V to 5.5V and offers a max on-state resistance of 8 ohm. With fast switching times of 24ns turn-on and 16ns turn-off, it is ideal for industrial applications requiring precise signal routing in compact spaces.
ADG706BRUZ-REEL7
ADG706BRUZ-REEL7 by Analog Devices is a CMOS SPST multiplexer with 16 channels. It operates at -40 to 85°C, with a max on-state resistance of 4.5 ohm and switch-on time of 50 ns. Ideal for industrial applications requiring high isolation and low resistance switching in compact designs.
ADG719BRMZ
SPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
ADG719BRTZ-500RL7
ADG719BRTZ-500RL7 by Analog Devices is a SPDT switch with 6 terminals, operating at a voltage range of 1.8V to 5.5V. It offers low on-state resistance of 12 ohm and fast switching times of 15ns turn-on and 8ns turn-off, suitable for automotive applications requiring high-speed signal routing in compact spaces.
ADG706BRUZ-REEL
ADG706BRUZ-REEL by Analog Devices is a 16-channel SPST CMOS multiplexer with 4.5 ohm Ron and 0.3 ohm resistance match. It operates at -40 to 85 °C, with Vsup ranging from 2.25V to 2.75V, making it ideal for industrial applications requiring precise signal switching in compact designs.
ADG708BRUZ-REEL
ADG708BRUZ-REEL by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at -40 to 125°C, with a max on-state resistance of 4.5 ohm and common output. Ideal for automotive applications due to its small size (5x4.4mm) and low supply current (0.001mA).
ADG709BRUZ
ADG709BRUZ by Analog Devices is a 16-terminal CMOS multiplexer with a max operating temperature of 125°C. It features a common output, differential multiplexer type, and small outline thin profile package style. Ideal for automotive applications due to its break-before-make switching and high off-state isolation of 60 dB.
ADG712BRUZ
ADG712BRUZ by Analog Devices is a CMOS SPST switch with 4 functions, operating at -40 to 85°C. It has a max on-state resistance of 8 ohm and switching voltage of 5.5V, suitable for industrial applications requiring high isolation and fast response times. The package is small outline with dual terminals, making it ideal for compact designs in various electronic systems.
ADG719BRTZ-REEL
ADG719BRTZ-REEL by Analog Devices is a SPDT switch with 6 terminals, operating at a voltage range of 1.8V to 5.5V. It features a max on-state resistance of 12 ohm and offers high off-state isolation of 67 dB. Ideal for automotive applications due to its CMOS technology and compact design with low profile package style.
ADG712BRZ
ADG712BRZ by Analog Devices is a CMOS SPST switch with 4 functions, operating at a supply voltage range of 1.8V to 5.5V. With a max on-state resistance of 8 ohm and fast switching times of 20ns turn-on and 12ns turn-off, it is ideal for industrial applications requiring precise signal routing in compact spaces.
ADG734BRUZ
ADG734BRUZ by Analog Devices is a CMOS SPDT switch with 4 functions, operating at -40 to 85 °C. It has a max on-state resistance of 4.5 ohm and switching voltage of 3/5/+-3 V, suitable for industrial applications requiring high isolation and fast switching times.
ADG719BRTZ-R2
ADG719BRTZ-R2 by Analog Devices is a SPDT switch with 6 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 12 ohm and nominal off-state isolation of 67 dB. Ideal for automotive applications due to its low profile design and CMOS technology.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved