Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Response Type: UNIVERSAL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Corphita
Active Filters MF5CWMX attributes and parameters. Explore more Active Filters devices from National Semiconductor
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Nominal Negative Supply Voltage:
Response Type:
Filter Technology:
Maximum Frequency - Cutoff or Center:
Minimum Frequency - Cutoff or Center:
Transfer Characteristics:
Poles and Zeros:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temperature Grade:
Total Functions:
Total Terminals:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
Qualified:
MF5CWMX Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
Diodes Incorporated
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Weitron Technology
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LTC1569IS8-6#TR
Analog Devices
LTC1569IS8-6#TR by Analog Devices is a continuous time filter with 10 poles and 0 zeros. It operates at a supply voltage of 3V, has a cutoff frequency range of 0-64 kHz, and is ideal for lowpass filtering applications in industrial settings.
TLC14IP
TLC14IP by Texas Instruments is an 8-terminal active filter with a CMOS technology, ideal for industrial applications. It operates at temperatures ranging from -40 to 85°C and has a lowpass response type with Butterworth transfer characteristics. With a max supply current of 3 mA and cutoff frequency range up to 20 kHz, it offers precise filtering capabilities in a compact rectangular package.
UAF42AP-1
UAF42AP-1 by Texas Instruments is a 14-terminal active filter with a max supply voltage of ±18 V. It operates in a temperature range of -25°C to 85°C and offers transfer characteristics including Butterworth, Bessel, and Chebyshev. Ideal for applications requiring continuous time filtering up to 100 kHz cutoff frequency.
MAX7400CPA+
MAX7400CPA+ by Analog Devices is an 8th order switched capacitor active filter with a cutoff frequency range of 0.001 kHz to 10 kHz. Operating at a supply voltage b/w 4.5V to 5.5V, it consumes a max current of 3.5mA and has a response type of lowpass. Ideal for commercial applications requiring precise elliptic transfer characteristics in a compact rectangular package design.
LTC1064-4CN
LTC1064-4CN by Analog Devices is a CMOS active filter with 8 poles and 0 zeros, ideal for industrial applications. It operates b/w -40 to 85 °C, with a cutoff frequency range up to 100 kHz. With a package style of IN-LINE and through-hole terminal form, it offers precise filtering capabilities in a compact design.
LTC1064-4CN#PBF
LTC1064-4CN#PBF by Analog Devices is a CMOS active filter with 8 poles, 0 zeros, and a max cutoff frequency of 100 kHz. It operates in an industrial temperature range from -40 to 85 °C and is ideal for lowpass filtering applications. The package style is in-line with through-hole terminals and matte tin finish.
MAX7422CUA+T
Analog Devices' MAX7422CUA+T is a BICMOS active filter with 5 poles and 0 zeros. It operates b/w 0-70 °C, with Vsup ranging from 2.7V to 3.6V. Ideal for lowpass filtering applications due to its switched capacitor technology in a small outline package.
MAX275AEWP+T
MAX275AEWP+T by Analog Devices is a 28-terminal active filter with -5.5V to 5.5V supply voltage range, 24mA max current, and operates b/w -40 °C to 85°C. Ideal for industrial applications requiring precise signal filtering in compact spaces due to its small outline package and surface mount capability.
LTC1067-50CS
LTC1067-50CS by Analog Devices is a CMOS active filter with 2 functions, operating b/w 0 to 70 °C. With a supply voltage range of 2.7V to 11V, it offers a cutoff frequency range from 0.001 kHz to 40 kHz. Ideal for applications requiring resistor programmable transfer characteristics in a small outline package.
LTC1067CS#TR
LTC1067CS#TR by Analog Devices is a CMOS active filter with 2 functions, operating b/w 0-70 °C. It features switched capacitor technology, resistor programmable transfer characteristics, and a cutoff frequency range of 0.001 kHz to 20 kHz. Ideal for applications requiring universal response types in commercial temperature grades.
MAX275ACWP+
Analog Devices' MAX275ACWP+ is a 28-terminal active filter with -5.5V to 5.5V supply voltage range, ideal for commercial applications. With a max supply current of 24mA and operating temperature up to 70°C, it offers precise filtering capabilities in a small outline package suitable for surface mount assembly.
MAX293CPA
Maxim Integrated
MAX293CPA by Maxim Integrated is an active filter with 8 poles and zeros, operating at a center/cutoff frequency range of 0.0001 kHz to 25 kHz. It has a lowpass response type and elliptic transfer characteristics, suitable for commercial applications requiring precise signal filtering within a temperature range of 0-70°C.
MAX264ACWI+T
MAX264ACWI+T by Analog Devices is a CMOS active filter with 2 functions, operating at -5V to +6.3V. It features a switched capacitor filter with poles and zeros at 140 kHz cutoff frequency range. Ideal for universal response type applications requiring pin programmable transfer characteristics in commercial temperature grades.
LT1568CGN#TRPBF
LT1568CGN#TRPBF by Analog Devices is a dual-function active filter with continuous-time filter type. It operates at a nominal voltage of 5V and has poles and zeros of 2 and 0 respectively. With response types including bandpass/lowpass, it is ideal for industrial applications requiring precise filtering in a compact small outline package.
MAX262AEWG+
Analog Devices' MAX262AEWG+ is a CMOS active filter with 2 functions, operating at -40 to 85 °C. It has a supply current of 20mA, supports negative voltages down to -6.3V, and positive voltages up to 6.3V. Ideal for industrial applications requiring precise filtering in a small outline package.
MAX262BCNG+
MAX262BCNG+ by Analog Devices is a CMOS active filter with 2 functions, operating at -5V to +6.3V. It features switched capacitor technology, response type is universal, and has a cutoff frequency range of 0.0014 kHz to 140 kHz. Ideal for applications requiring digitally programmable transfer characteristics in commercial temperature grades.
MAX297ESA+
SWITCHED CAPACITOR FILTER; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Matte Tin (Sn) - annealed;
MAX274BCWI+T
Analog Devices' MAX274BCWI+T is a 28-terminal active filter with -5.5V to 5.5V supply voltage range, consuming 30mA max current. It's surface-mountable in a small outline package, ideal for commercial temperature applications requiring precise signal filtering and processing.
LTC1064-2CSW#TR
LTC1064-2CSW#TR by Analog Devices is a CMOS active filter with 16 terminals, operating b/w -40 to 85 °C. It features a lowpass Butterworth response type, with a cutoff frequency range up to 140 kHz. Ideal for industrial applications requiring precise signal filtering in compact spaces.
LTC1059CS
LTC1059CS by Analog Devices is a CMOS active filter with 14 terminals and a small outline package. It operates b/w -40 to 85 °C, with cutoff frequency range of 0.1 kHz to 40 kHz. Ideal for industrial applications requiring universal response types like Butterworth, Bessel, or Chebyshev filters.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved