Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX7423CUA+ by Analog Devices is a BICMOS technology active filter with 8 terminals. It operates b/w 0-70°C, with supply voltage range of 2.7-3.6V. Ideal for lowpass filtering applications due to its switched capacitor design and Bessel transfer characteristics.
Median Price
$10.825
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
$10.140
100+ parts
$6.749
1k+ parts
$6.137
10k+ parts
-
DigiKey
$11.510
$7.718
$7.034
Mouser Electronics
$11.860
$7.940
$7.130
Rochester
$6.440
$5.760
$5.420
Digiode
$5.909
Vyrian
Anansix
Semicontronic
$5.290
$5.158
$5.131
Corphita
$5.598
MARBEL Systems
$21.607
Texas Native Microelectronics
$24.836
$21.856
Kenton Components
$29.803
$26.227
Microchip USA
$29.850
$29.420
$29.210
$29.000
Qasali Group International
$67.057
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
The use of plastic/epoxy material for the package body provides durability and protection for the internal components of the active filter.
The surface mount capability allows for easy and efficient installation of the active filter onto a PCB, saving space and simplifying the assembly process.
The BICMOS technology combines the benefits of both bipolar and CMOS technologies, offering high-speed performance and low power consumption for the active filter.
The switched capacitor filter design allows for accurate and precise filtering of signals, making it suitable for applications where signal clarity is crucial.
The 3V nominal supply voltage ensures compatibility with a wide range of electronic devices and power sources.
Having 5 poles and 0 zeros provides the active filter with a specific frequency response characteristic, allowing for customized filtering of signals.
The high maximum operating temperature of 70°C ensures that the active filter can withstand elevated temperatures without compromising performance.
The small terminal pitch of 0.65mm allows for compact and densely populated PCB designs, ideal for space-constrained applications.
The peak reflow temperature of 260°C ensures reliable soldering and robust connections during the manufacturing process.
Active Filters MAX7423CUA+ attributes and parameters. Explore more Active Filters devices from Analog Devices
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Semiconductor Technology:
Response Type:
Filter Technology:
Transfer Characteristics:
Poles and Zeros:
Maximum Operating Temperature:
Minimum Operating Temperature:
Moisture Sensitivity Level (MSL):
Soldering Temperature:
Temperature Grade:
Reflow Temperature Time Limit:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Qualified:
MAX7423CUA+ Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Baneasa S A
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
Digitron Semiconductors
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MAX295ESA+
Analog Devices
MAX295ESA+ by Analog Devices is an active filter with 8 poles and 0 zeros, operating at a cutoff frequency range of 50 kHz. It has a lowpass response type with Butterworth transfer characteristics. Ideal for industrial applications requiring precise signal filtering in a compact small outline package.
LTC1565-31IS8#TR
LTC1565-31IS8#TR by Analog Devices is a continuous time active filter with 7 poles and 0 zeros. It operates at a center frequency range of 650 kHz, ideal for lowpass filtering applications. This small outline package has a rectangular shape, Gull Wing terminals, and can handle temperatures from -40 to 85 °C.
MF4CN-50
Texas Instruments' MF4CN-50 is a CMOS active filter with 8 terminals and switched capacitor technology. It operates at -7V to 7V, with Isup of 3.5mA and Vsup of +-2.5/+-5V. Ideal for lowpass filtering applications up to 20kHz in commercial temperature range.
MAX275ACWP+T
MAX275ACWP+T by Analog Devices is a 28-terminal active filter with -5.5V to 5.5V supply voltage range, 24mA max supply current, and operates b/w 0-70 °C. Ideal for applications requiring small outline package, surface mount capability, and Gull Wing terminals in commercial temperature grade environments.
LTC1067-50CGN#TR
LTC1067-50CGN#TR by Analog Devices is a CMOS active filter with 2 functions, operating b/w 0 to 70 °C. It features a switched capacitor filter technology, with a center frequency range of 0.001 kHz to 40 kHz. Ideal for applications requiring resistor programmable transfer characteristics in commercial temperature grade environments.
MAX7412CPA+
MAX7412CPA+ by Analog Devices is a CMOS active filter with 5 poles and 0 zeros, operating b/w 0-70 °C. It has a lowpass response type, elliptic transfer characteristics, and a cutoff frequency range of 0.001 kHz to 15 kHz. Ideal for applications requiring precise signal filtering in commercial temperature environments.
MAX7419CUA+T
Analog Devices' MAX7419CUA+T is a BICMOS active filter with 5 poles and 0 zeros. Operating b/w 0-70 °C, it has a lowpass response type and transfer characteristics of BESSEL. Ideal for applications requiring switched capacitor filters in commercial temperature grade environments.
MAX7407ESA
Maxim Integrated
MAX7407ESA by Maxim Integrated is an 8th order switched capacitor filter with a cutoff frequency range of 0.001 kHz to 10 kHz. It operates on a supply voltage b/w 2.7V to 3.6V, drawing a max current of 3.5mA, making it ideal for lowpass filtering applications in industrial settings.
LT1567IMS8#TRPBF
LT1567IMS8#TRPBF by Analog Devices is a continuous time active filter with 3 poles and 0 zeros, operating in an industrial temperature range of -40 to 85 °C. It has a max cutoff frequency of 5 MHz and supports both Butterworth and Chebyshev transfer characteristics. This small outline package with gull wing terminals is ideal for bandpass/lowpass filtering applications.
MAX7418EUA+T
Analog Devices' MAX7418EUA+T is a BICMOS active filter with 5 poles and 0 zeros. It operates b/w 0-70 °C, has a supply voltage range of 4.5-5.5V, and features a lowpass elliptic response type. Ideal for applications requiring switched capacitor filters in small outline packages with gull wing terminals.
MAX295WE
Analog Devices' MAX295WE is a 16-terminal active filter with -5V to 5V supply voltage range. Featuring a lowpass Butterworth response type, it offers a cutoff frequency range of 0.0001 kHz to 50 kHz. Ideal for applications requiring precise signal filtering in compact spaces due to its small outline package style and surface-mount capability.
MAX7404ESA+
Analog Devices' MAX7404ESA+ is a CMOS active filter with 8 poles and zeros, operating at -40 to 85°C. It has a lowpass response type, elliptic transfer characteristics, and a cutoff frequency range of 0.001 kHz to 10 kHz. Ideal for industrial applications requiring precise signal filtering in compact designs.
LTC1569CS8-7#PBF
Linear Technology
CONTINUOUS TIME FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
LTC1562IG
LTC1562IG by Analog Devices is a CMOS active filter with 4 functions, -5V to 5V supply voltage range, and 150kHz max cutoff frequency. Ideal for industrial applications requiring resistor programmable transfer characteristics in a small outline package.
MAX7419EUA
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Response Type: LOWPASS;
LTC1562ACG#TR
LTC1562ACG#TR by Analog Devices is a CMOS active filter with 4 functions, -5V to 5V supply voltage range, and 20 terminals. It features continuous-time filtering, universal response type, and resistor programmable transfer characteristics. Ideal for applications requiring a small outline package with a cutoff frequency range of 10kHz to 150kHz in commercial temperature grades.
MAX274C/D
Active Filters;
LTC1569CS8-6#TR
LTC1569CS8-6#TR by Analog Devices is a CMOS active filter with 10 poles and 0 zeros. It operates at a nominal voltage of 3V, has a cutoff frequency range of 0-64 kHz, and is ideal for lowpass filtering applications in commercial temperature environments.
LTC1164ACSW
LTC1164ACSW by Analog Devices is a CMOS active filter with 4 functions, -8V to 8V supply voltage range, and 20 kHz cutoff frequency. Ideal for industrial applications requiring switched capacitor filters in a small outline package. Operating temperature from -40 °C to 85°C makes it versatile for various environments.
MAX7427CUA+
Analog Devices' MAX7427CUA+ is a BICMOS active filter with 5 poles and 0 zeros, operating at a supply voltage range of 2.7V to 3.6V. This switched capacitor filter has a lowpass response type with elliptic transfer characteristics, ideal for applications requiring a cutoff frequency range from 0.001 kHz to 12 kHz in commercial temperature grades.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
MAX7420EUA
MAX7420EUA+
MAX7419EUA-T
MAX7419EUA+T
MAX7420EUA-T
MAX7420EUA-T by Maxim Integrated is a BICMOS active filter with 5 poles and 0 zeros. It operates b/w -40 to 85°C, ideal for industrial applications. This switched capacitor filter has a lowpass response type and requires a supply voltage of 4.5-5.5V.
MAX7420EUA+T
MAX7419EUA+
MAX7400ESA
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
MAX7400ESA+
MAX7400ESA+T
MAX7400ESA-T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved