Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHED CAPACITOR FILTER; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
Median Price
$14.940
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Newark
1+ parts
$2.540
100+ parts
1k+ parts
10k+ parts
-
Analog Devices Inc
$10.173
$9.313
Mouser Electronics
$16.710
$11.640
$10.590
DigiKey
$16.980
$11.643
$10.908
Verical
$8.485
Digiode
$5.672
Vyrian
$5.970
Anansix
PC Components Company LLC
Bristol Electronics
Semicontronic
$5.070
$4.943
$4.918
Corphita
$5.373
Vigor
$8.480
MARBEL Systems
$17.765
Texas Native Microelectronics
$20.419
$18.990
$17.969
Kenton Components
$24.503
$21.562
Microchip USA
$38.980
$38.420
$38.140
$37.860
Qasali Group International
$55.131
Perfect Parts
Active Filters MAX297CSA+ attributes and parameters. Explore more Active Filters devices from Analog Devices
Filter Technology:
Moisture Sensitivity Level (MSL):
Soldering Temperature:
Reflow Temperature Time Limit:
Terminal Finish:
JESD-609 Code:
MAX297CSA+ Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
1N4148WS
Taiwan Semiconductor
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
Yangzhou Yangjie Electronics
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
MAX263BEWI+T
Analog Devices
Analog Devices' MAX263BEWI+T is a 28-terminal active filter with switched capacitor technology, featuring -6.3V to 6.3V supply voltage range and 57kHz cutoff frequency. Ideal for universal response applications, this rectangular-shaped IC operates b/w 0 °C to 70°C temperatures in commercial-grade setups.
MAX7420EUA+T
Maxim Integrated
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Response Type: LOWPASS;
TLC04MP
TLC04MP by Texas Instruments is an active filter with 4 poles and 0 zeros, operating at a temperature range of -55 to 125 °C. It has a lowpass response type with Butterworth transfer characteristics and a max cutoff frequency of 40 kHz. Ideal for military applications due to its MIL-graded temperature tolerance.
LTC1067-50IGN#PBF
Linear Technology
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: UNIVERSAL;
LTC1566-1IS8#TRPBF
LTC1566-1IS8#TRPBF by Analog Devices is a small outline active filter with -5V to 5V supply voltage range. It features continuous time Bessel lowpass response with 7 poles and 0 zeros, suitable for industrial temperature applications. The Gull Wing package has a rectangular shape, matte tin finish, and dual terminal position for surface mount assembly.
LTC1069-1IS8#TR
LTC1069-1IS8#TR by Analog Devices is a CMOS active filter with 8 poles and zeros, operating b/w -40 to 85 °C. It features a lowpass response type with elliptic transfer characteristics, suitable for industrial applications requiring a cutoff frequency range of 0-8 kHz. This small outline package has Gull Wing terminals and can handle supply voltages from -5.5V to 5.5V.
LTC1059CN
LTC1059CN by Analog Devices is a CMOS active filter with 14 terminals and -8V to 8V supply voltage range. It features switched capacitor technology, operates b/w -40 °C to 85°C, and has a cutoff frequency range of 0.1 kHz to 40 kHz. Ideal for industrial applications requiring universal response types like Butterworth, Bessel, or Chebyshev filters.
LTC1059CS#PBF
LTC1059CS#PBF by Analog Devices is a CMOS active filter with 14 terminals, -8V to 8V supply voltage range, and 40kHz max cutoff frequency. Ideal for industrial applications requiring universal response types like Butterworth, Bessel, or Chebyshev filters in a compact small outline package.
MAX7424CUA
MAX7424CUA by Analog Devices is a BICMOS active filter with 3.8 mA Isup, operating from 2.7V to 3.6V. It features a lowpass Butterworth response type and is ideal for switched capacitor filtering applications in commercial temperature environments.
MAX294EWE+
Analog Devices' MAX294EWE+ is a switched capacitor active filter with 8 poles and 0 zeros, operating at -40 to 85°C. It has a lowpass response type with elliptic transfer characteristics and a cutoff frequency range of 25 kHz. Ideal for industrial applications requiring precise signal filtering in compact designs.
MAX293CSA+
SWITCHED CAPACITOR FILTER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
MAX263BCWI+T
MAX263BCWI+T by Analog Devices is a CMOS active filter with 2 functions, operating at -5V to 6.3V. It features a switched capacitor filter with poles and zeros at 57 kHz, suitable for universal response type applications. This small outline package has Gull Wing terminals and operates b/w 0 °C to 70°C.
32F8101-CV
32F8101-CV by Texas Instruments is a small outline active filter with continuous time filtering. It operates at a supply voltage range of 4.5V to 5.5V, with a cutoff frequency range of 9kHz to 27kHz ideal for lowpass applications. This rectangular package has Gull Wing terminals and is suitable for commercial temperature grades.
MAX7442ESD
Analog Devices' MAX7442ESD is a BICMOS active filter with 6 functions, 4 poles, and 0 zeros. It operates as a continuous time lowpass Butterworth filter with a supply voltage range of 4.75V to 5.25V. Ideal for industrial applications requiring precise signal filtering in a compact small outline package.
MAX261BEWG+
MAX261BEWG+ by Analog Devices is a CMOS active filter with 2 functions. It operates at -40 to 85 °C, with Isup of 20mA and Vsup range from -6.3V to 6.3V. Ideal for applications requiring precise filtering in small outline packages.
MF10CCFN
The Texas Instruments MF10CCFN is a 20-terminal active filter with switched capacitor technology. It operates on a supply voltage range of 4-6V and has a max current draw of 10mA. Ideal for applications requiring universal response types and resistor programmable transfer characteristics at temperatures ranging from 0 to 70°C.
LTC1569CS8-7#TR
LTC1569CS8-7#TR by Analog Devices is a CMOS active filter with 10 poles and 0 zeros. It operates at a supply voltage range of 2.7V to 4.6V, with a cutoff frequency up to 150 kHz. Ideal for lowpass filtering applications in commercial temperature environments.
MAX295EWE+
Analog Devices' MAX295EWE+ is an active filter with 8 poles, 0 zeros, and a cutoff frequency range of 50 kHz. It operates on +-5V power supplies, has a lowpass Butterworth response type, and is ideal for industrial applications requiring precise signal filtering in compact designs.
LMF100CIWM
Texas Instruments LMF100CIWM is a CMOS active filter with 2 functions. It operates at -40 to 85°C, with supply voltage range of 2-7.5V. Ideal for industrial applications requiring switched capacitor filters with cutoff frequency up to 100 kHz.
LTC1067-50IGN#TR
LTC1067-50IGN#TR by Analog Devices is a CMOS active filter with 2 poles and 0 zeros. It operates in a temperature range of -40 to 85 °C and has a cutoff frequency range of 0.001 kHz to 40 kHz. This switched capacitor filter is ideal for industrial applications requiring resistor programmable transfer characteristics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
MAX292ESA
MAX292ESA by Maxim Integrated is an active filter with 8 poles and zeros, operating at a center frequency range of 0.0001 kHz to 25 kHz. It has a lowpass response type with Bessel transfer characteristics, suitable for industrial applications requiring switched capacitor filters. The package style is small outline, making it ideal for surface mount designs with a terminal pitch of 1.27 mm.
MAX292ESA+
MAX292ESA+ by Analog Devices is an active filter with switched capacitor technology. It operates on +-5V power supplies, has 8 poles and zeros, and a lowpass Bessel response type. With a cutoff frequency range of 0.0001 kHz to 25 kHz, it is ideal for industrial applications requiring precise signal filtering in a compact small outline package.
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
MAX291CPA
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Response Type: LOWPASS;
MAX291CPA+
MAX275BCWP+
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; JESD-30 Code: R-PDSO-G28;
MAX275BCWP
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Maximum Supply Current (Isup): 24 mA;
MAX275BCWP+ by Analog Devices is an active filter with 24mA Isup, -5.5V Vsup, and 70°C max operating temp. Ideal for applications requiring precise signal filtering in commercial-grade environments.
MAX274BEWI
MAX274BEWI by Maxim Integrated is an active filter with 30 mA Isup, -5.5 V to 5.5 V Vsup range, and 28 terminals in a small outline package. It is used in industrial applications for signal processing and noise filtering due to its wide operating temperature range of -40°C to 85°C.
MAX274BEWI+
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Terminal Pitch: 1.27 mm;
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Terminal Finish: MATTE TIN;
MAX274AEWI
MAX274AEWI by Maxim Integrated is an active filter with 30mA Isup, -5.5V to 5.5V Vsup range, and 28 terminals in a small outline package. Ideal for industrial applications requiring precise signal filtering and conditioning in a compact form factor.
MAX274AEWI+
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Minimum Supply Voltage (Vsup): 2.37 V;
Active Filters; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Moisture Sensitivity Level (MSL): 1;
MAX274BCWI
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Maximum Supply Voltage (Vsup): 5.5 V;
MAX274BCWI+
Active Filters; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Nominal Negative Supply Voltage (Vsup): -5 V;
MAX293CPA+
MAX293CPA
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved