Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Response Type: UNIVERSAL;
Median Price
$28.550
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$4.290
100+ parts
-
1k+ parts
$2.890
10k+ parts
$2.370
DigiKey
$21.184
$19.395
Chip1Stop
$309.000
Nova Conductors
$2.400
Digiode
$4.076
Vyrian
Chip Stock
Anansix
Inventory MP
Bristol Electronics
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Aranea Global
$2.352
$2.258
Continental Prestige Electronics
Argo Parts USA
Corohmni
$2.560
Ampacity Inc.
$3.650
Semicontronic
$3.559
$3.540
Corphita
$3.861
Microchip USA
$6.890
$6.850
$6.830
$6.810
Parana Technologies
$8.297
$8.917
DigiPath Technology Company
$9.137
ChromeModa Solutions
$9.323
$7.645
IDEA Electronic Components Group
$8.857
$8.391
Lixinc
iodParts Technologies Inc.
Perfect Parts
Authorized Procurement Solutions
Speed Components Ltd (Excess)
Active Filters MF10CCWM/NOPB attributes and parameters. Explore more Active Filters devices from National Semiconductor
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Nominal Negative Supply Voltage:
Semiconductor Technology:
Response Type:
Filter Technology:
Maximum Frequency - Cutoff or Center:
Minimum Frequency - Cutoff or Center:
Transfer Characteristics:
Poles and Zeros:
Filter Order:
Maximum Operating Temperature:
Minimum Operating Temperature:
Moisture Sensitivity Level (MSL):
Soldering Temperature:
Temperature Grade:
Reflow Temperature Time Limit:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Equivalence Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Special Features:
Qualified:
MF10CCWM/NOPB Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Copper Wire Update 14/May/2015
PCN Assembly/Origin - Mult Devices Wafer Fab Site 26/Feb/2018
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Rochester Electronics
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
M39029/56-351
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
LTC1562CN#PBF
LTC1562CN#PBF by Analog Devices is a CMOS active filter with 4 functions, -5V to 5V supply voltage range, and 150kHz max cutoff frequency. Ideal for universal response applications, it features switched capacitor technology and resistor programmable transfer characteristics.
TLC10FN
Texas Instruments
The Texas Instruments TLC10FN is a CMOS active filter with 2 functions, featuring a switched capacitor design. With 20 terminals in a square chip carrier package, it offers universal response types like Butterworth and Chebyshev. Ideal for commercial applications, operating b/w 0°C to 70°C.
LTC1068-25IG#TRPBF
LTC1068-25IG#TRPBF by Analog Devices is a 4-function switched capacitor filter with -5.5V max negative supply voltage and 200 kHz max cutoff frequency. Ideal for industrial applications, this active filter has a small outline package style and operates b/w -40 °C to 85°C temperature range.
MAX297JA
Analog Devices' MAX297JA is a ceramic, glass-sealed active filter with -5V nominal negative supply voltage and 5V nominal voltage. Featuring an elliptic response type, it has 8 poles and zeros with a max cutoff frequency range of 50 kHz. Ideal for lowpass filtering applications in various electronic circuits.
LTC1067-50CS
LTC1067-50CS by Analog Devices is a CMOS active filter with 2 functions, operating b/w 0 to 70 °C. With a supply voltage range of 2.7V to 11V, it offers a cutoff frequency range from 0.001 kHz to 40 kHz. Ideal for applications requiring resistor programmable transfer characteristics in a small outline package.
LTC1164-5M/883
LTC1164-5M/883 by Analog Devices is a CMOS active filter with -7.5V nominal negative supply voltage and 14 terminals. It operates in temperatures ranging from -55 °C to 125°C, making it suitable for military-grade applications requiring lowpass Butterworth/Bessel response type filters. The package style is in-line with ceramic, metal-sealed cofired body material.
LTC1069-7CS8#PBF
Linear Technology
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
LTC1067CGN#TRPBF
LTC1067CGN#TRPBF by Analog Devices is a CMOS active filter with 2 functions, operating at -40 to 70 °C. It features switched capacitor technology, with a cutoff frequency range of 0.001 kHz to 40 kHz. Ideal for universal response type applications requiring resistor programmable transfer characteristics.
MAX295CWE+T
MAX295CWE+T by Analog Devices is an active filter with 8 poles, 0 zeros, and a cutoff frequency range of 0.0001 kHz to 50 kHz. It operates on +-5V power supplies, has a lowpass response type (Butterworth), and is ideal for applications requiring precise signal filtering in commercial temperature environments.
32F8102-CN
32F8102-CN by Texas Instruments is a small outline active filter with continuous time filtering. It operates at a supply voltage range of 4.5V to 5.5V, offering a lowpass response type with Bessel transfer characteristics. Ideal for applications requiring precise signal processing in commercial temperature environments up to 70°C.
LTC1569IS8-6#PBF
LTC1569IS8-6#PBF by Analog Devices is a continuous time active filter with 10 poles and 0 zeros. It operates at a nominal voltage of 3V, with a cutoff frequency range up to 64 kHz. Ideal for industrial applications requiring lowpass filtering in compact designs.
TSG8511IP
STMicroelectronics
TSG8511IP by STMicroelectronics is an active filter with a max supply current of 5 mA and technology based on CMOS. It operates at temperatures ranging from -25 °C to 85°C, making it suitable for lowpass filtering applications. With 16 terminals and a package style of IN-LINE, it offers precise elliptic transfer characteristics.
MAX7403CPA+
MAX7403CPA+ by Analog Devices is an active filter with 8 poles, 0 zeros, and a lowpass response type. It operates on a supply voltage range of 4.5V to 5.5V and has a max cutoff frequency of 10 kHz. Ideal for applications requiring elliptic transfer characteristics in commercial temperature grades.
TSG8512IC
STMicroelectronics' TSG8512IC is a CMOS active filter with -5V to 5V supply voltage, 16 terminals, and elliptic transfer characteristics. It operates b/w -25 °C to 85°C, drawing a max of 5mA current. Ideal for lowpass filtering applications in various industries due to its switched capacitor technology.
TSG8511CC
TSG8511CC by STMicroelectronics is a CMOS active filter with 16 terminals and -5V to +5V power supplies. It features a switched capacitor filter with lowpass response type and elliptic transfer characteristics. Ideal for commercial applications, it operates b/w 0 °C to 70°C temperature range.
LTC1569IS8-7#PBF
CONTINUOUS TIME FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
LT1567CMS8#PBF
LT1567CMS8#PBF by Analog Devices is an 8-terminal active filter with a continuous time filter type, operating b/w -40 to 85 °C. It features a max cutoff frequency of 5 MHz and response types include bandpass/lowpass with Butterworth/Chebyshev transfer characteristics. Ideal for industrial applications requiring precise signal filtering in compact spaces.
MAX293CPA
Maxim Integrated
MAX293CPA by Maxim Integrated is an active filter with 8 poles and zeros, operating at a center/cutoff frequency range of 0.0001 kHz to 25 kHz. It has a lowpass response type and elliptic transfer characteristics, suitable for commercial applications requiring precise signal filtering within a temperature range of 0-70°C.
MAX292EWE+
Analog Devices' MAX292EWE+ is an active filter with 8 poles and 0 zeros, operating in a temperature range of -40 to 85°C. It features a lowpass Bessel response type with a max cutoff frequency of 25 kHz. Ideal for industrial applications requiring precise signal filtering within a compact small outline package.
LTC1064ACN#TRPBF
LTC1064ACN#TRPBF by Analog Devices is a 24-terminal active filter with switched capacitor technology. It operates b/w -40 to 85 °C, with a cutoff frequency range of 0.0001-140 kHz. Ideal for industrial applications requiring resistor programmable transfer characteristics in a compact rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF10CCWMX/NOPB
The Texas Instruments MF10CCWMX/NOPB is a CMOS active filter with 20 terminals and a small outline package. It operates on a supply voltage range of 4.5V to 7V, with a max current draw of 12mA. Ideal for applications requiring switched capacitor filters with universal response types up to 20kHz cutoff frequency.
MF10CCWMX
MF10CCWM/NOPB
MF10CCN-N
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Response Type: UNIVERSAL;
MF10CCN/NOPB
MF10CCWM
MF10ACN
MF100CCWM
MF10ACWM
MF10CCN
MF10ACFN
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 20; Package Code: QCCJ; Response Type: UNIVERSAL;
MF100CCM
MF10CCFN
MF10BN
MF10BN+
MF10BWP+
MF10BWP
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved