Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC1067CS#TRPBF by Analog Devices is a CMOS active filter with 2 functions, operating at 0-70 °C. It features switched capacitor technology, with a cutoff frequency range of 0.001 kHz to 20 kHz. Ideal for applications requiring resistor programmable transfer characteristics in commercial temperature grade environments.
Median Price
$6.910
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Analog Devices Inc
1+ parts
100+ parts
-
1k+ parts
$5.800
10k+ parts
$6.300
Digiode
$5.710
Vyrian
$6.010
Anansix
Vigor
$4.732
One Stop Electronics
$5.110
Semicontronic
$4.982
$4.957
Corphita
$5.409
Corohmni
MARBEL Systems
$9.395
Texas Native Microelectronics
$10.799
$10.367
$10.043
$9.503
Kenton Components
$12.959
$11.404
Parana Technologies
$22.376
$20.809
IDEA Electronic Components Group
$24.060
$22.857
Qasali Group International
$29.157
$27.116
$25.658
DigiPath Technology Company
$37.534
$36.032
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
The plastic/epoxy material is lightweight, durable, and cost-effective, making it a practical choice for the package body of this active filter.
Being surface mountable allows for easy and efficient assembly onto circuit boards, saving time and space in the overall design.
Having two functions in one component increases efficiency and reduces the need for additional components in the circuit design.
CMOS technology offers low power consumption and high noise immunity, making this active filter energy-efficient and reliable.
The 4.75V supply voltage is within a commonly used range in electronic systems, ensuring compatibility with various applications.
With a maximum operating temperature of 70 °C, this active filter can withstand typical environmental conditions without overheating.
The presence of 2 poles and 0 zeros in the transfer function allows for precise control and shaping of the filter response, enhancing performance.
The 20 kHz maximum cutoff frequency range enables this active filter to handle high-frequency signals effectively, suitable for a wide range of applications.
Active Filters LTC1067CS#TRPBF attributes and parameters. Explore more Active Filters devices from Analog Devices
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Semiconductor Technology:
Response Type:
Filter Technology:
Maximum Frequency - Cutoff or Center:
Minimum Frequency - Cutoff or Center:
Transfer Characteristics:
Poles and Zeros:
Maximum Operating Temperature:
Minimum Operating Temperature:
Moisture Sensitivity Level (MSL):
Soldering Temperature:
Temperature Grade:
Reflow Temperature Time Limit:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Qualified:
LTC1067CS#TRPBF Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mult Dev 12/Oct/2022 Multiple Parts 06/Aug/2022
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Lite-on Semiconductor
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Transistor & Electronic
B340A-13-F
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
MAX297EWE+T
Analog Devices
Analog Devices' MAX297EWE+T is a switched capacitor active filter with 8 poles and 0 zeros, operating at -40 to 85 °C. It has a lowpass response type with elliptic transfer characteristics and a cutoff frequency range of 50 kHz. Ideal for industrial applications requiring precise signal filtering in compact designs.
TSG85121IP
TSG85121IP by STMicroelectronics is an active filter with CMOS technology. It has a max supply current of 5 mA and operates at temperatures ranging from -25 °C to 85°C. Ideal for lowpass filtering applications, this rectangular-shaped filter features switched capacitor technology and a nominal voltage of 5V.
LT1568IGN#TR
Analog Devices' LT1568IGN#TR is a dual-function active filter with continuous-time filtering. It operates at a nominal voltage of 5V and supports bandpass/lowpass response types. With a max cutoff frequency range of 10MHz, it is ideal for industrial applications requiring precise signal processing in compact designs.
LTC1164-5CSW#TR
LTC1164-5CSW#TR by Analog Devices is a switched capacitor filter with 8 poles and 0 zeros, operating in a temperature range of -40 to 85 °C. It has a lowpass response type with a max cutoff frequency of 20 kHz, suitable for industrial applications requiring pin programmable transfer characteristics. The package style is small outline with Gull Wing terminals, making it ideal for surface mount designs.
LTC1069-6CS8#TR
LTC1069-6CS8#TR by Analog Devices is a CMOS active filter with 8 poles and 0 zeros, operating b/w 0 °C to 70°C. It has a lowpass response type with elliptic transfer characteristics and a cutoff frequency range of 0 kHz to 20 kHz. This switched capacitor filter is ideal for applications requiring precise signal filtering in small outline packages.
LTC1069-7CS8#TRPBF
LTC1069-7CS8#TRPBF by Analog Devices is a CMOS active filter with 8 poles and zeros, operating at -5V to 5V. It features a lowpass Bessel response type with a cutoff frequency range of 0-200 kHz. Ideal for applications requiring precise signal filtering in commercial temperature environments.
LTC1069-1IS8
LTC1069-1IS8 by Analog Devices is a CMOS active filter with switched capacitor technology. It operates at temperatures ranging from -40 to 85 °C and has a lowpass response type with elliptic transfer characteristics. Ideal for industrial applications requiring an 8 kHz cutoff frequency, this small outline package features Gull Wing terminals and a rectangular shape.
UAF42AP
Texas Instruments
UAF42AP by Texas Instruments is an active filter with 14 terminals and a package style of IN-LINE. It operates on +-15V power supplies, with a max supply current of 7mA. With a response type of UNIVERSAL, it has transfer characteristics including BUTTERWORTH/BESSEL/CHEBYSHEV filters and can be used in various applications requiring continuous time filtering up to 100kHz cutoff frequency range.
MAX7407CSA+T
Analog Devices' MAX7407CSA+T is a CMOS active filter with 8 poles and zeros, operating at 3V. It has a lowpass response type with a cutoff frequency range of 0.001 kHz to 10 kHz, making it ideal for signal processing applications requiring precise filtering in commercial temperature environments.
MF4A-100IP
The Texas Instruments MF4A-100IP is a CMOS active filter with 8 terminals and a lowpass response type. It operates at temperatures ranging from -40 to 85 °C, with a cutoff frequency range of 0.00005 kHz to 20 kHz. Ideal for industrial applications requiring precise signal filtering within a compact rectangular package.
TLC20CFN
TLC20CFN by Texas Instruments is a CMOS active filter with 2 functions, operating at -6V to 6V. It features a switched capacitor filter with a cutoff frequency range of 20 kHz. Ideal for universal response applications in commercial temperature grades, this chip carrier package has 20 terminals and J-bend shape for surface mount assembly.
MAX7421CUA+T
Analog Devices' MAX7421CUA+T is a BICMOS active filter with 5 poles and 0 zeros. It operates b/w 0-70 °C, has a supply voltage range of 4.5-5.5V, and features an elliptic lowpass response type. Ideal for applications requiring switched capacitor filters in small outline packages with gull wing terminals.
LTC1064-3CN#PBF
Linear Technology
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Response Type: LOWPASS;
MAX7405ESA+T
Analog Devices' MAX7405ESA+T is an 8th order switched capacitor filter with a cutoff frequency range of 0.001 kHz to 15 kHz. Operating at -40 °C to 85°C, it consumes a max supply current of 3.5 mA at voltages b/w 2.7V to 3.6V, making it ideal for industrial applications requiring low-pass Bessel response filters in compact SMD packages.
LTC1060CN
LTC1060CN by Texas Instruments is a CMOS active filter with 2 functions. It has a max supply current of 12 mA and operates in temperatures ranging from -40 to 85°C. Ideal for applications requiring switched capacitor filters, it offers multiple transfer characteristics like Butterworth and Chebyshev.
LTC1569IS8-7#PBF
CONTINUOUS TIME FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
LTC1069-6CS8
LTC1069-6CS8 by Analog Devices is a CMOS active filter with 8 poles and 0 zeros, operating b/w 0 to 70 °C. It features a switched capacitor filter technology, lowpass response type, and elliptic transfer characteristics. Ideal for applications requiring a small outline package style and max supply voltage of 10V.
MAX294WE
Analog Devices' MAX294WE is a 16-terminal active filter with -5V to 5V supply voltage range. It features an elliptic response type, 8 poles, and a cutoff frequency range of 0.0001 kHz to 50 kHz. Ideal for lowpass filtering applications in compact designs due to its small outline package style and surface-mount capability.
MAX7401CSA+
Analog Devices' MAX7401CSA+ is a CMOS active filter with 8 poles and zeros, operating b/w 0-70°C. It has a lowpass Bessel response type with a cutoff frequency range of 0.001 kHz to 15 kHz. Ideal for applications requiring switched capacitor filters in small outline packages.
MAX270BENG
MAX270BENG by Analog Devices is a CMOS active filter with 2 functions. It has 20 terminals in an in-line package style, suitable for industrial applications. With a temperature range of -40 to 85 °C, it offers universal response type and through-hole terminal form.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
LTC1060CSW#PBF
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Response Type: UNIVERSAL;
LTC1569IS8-7#PBF by Analog Devices is a small outline active filter with continuous time filtering, 10 poles and 0 zeros. It operates in an industrial temperature range from -40 to 85°C, with a cutoff frequency of up to 150 kHz. Ideal for lowpass applications, it offers pin or resistor programmable transfer characteristics.
LTC1563-2CGN#PBF
LTC1563-2CGN#PBF by Analog Devices is a 16-terminal active filter with continuous time filtering, operating b/w 0 to 70°C. It features a lowpass response type with Butterworth transfer characteristics and a max cutoff frequency range of 256 kHz. This small outline, surface-mount device is commonly used in commercial applications requiring precise signal filtering.
CONTINUOUS TIME FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: LOWPASS;
LTC1569IS8-7
LTC1569IS8-7#TRPBF
LTC1064-2CN#PBF
LTC1569IS8-7#TR
LTC1060CSW#TRPBF
LTC1060CSW#TRPBF by Analog Devices is a CMOS active filter with 2 functions. It has a max operating temperature of 85°C and a min supply voltage of 2.37V. This switched capacitor filter is commonly used in industrial applications for its universal response type and transfer characteristics (Butterworth/Bessel/Chebyshev).
LTC1563-2IGN#TRPBF
CONTINUOUS TIME FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: LOWPASS;
LTC1563-2IGN#PBF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved