Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTC1060CSW#PBF by Analog Devices is a CMOS active filter with 2 functions, operating from -8V to 8V. It features switched capacitor technology, response types like Butterworth/Bessel/Chebyshev, and a cutoff frequency range of 0.1 kHz to 20 kHz. Ideal for industrial applications requiring precise signal filtering in compact designs.
Median Price
$13.792
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$9.410
100+ parts
$8.290
1k+ parts
-
10k+ parts
Farnell
$11.751
$10.360
$8.121
$7.438
Analog Devices Inc
$13.650
$6.380
Element14
$13.933
$11.803
$9.163
$8.065
DigiKey
$13.990
$10.018
$8.848
$8.668
Mouser Electronics
$10.020
$8.840
Newark
$14.060
$8.180
$7.150
Arrow
$7.459
$7.317
$6.890
Nova Conductors
$8.325
Digiode
$8.940
Chip Stock
Anansix
Vyrian
ACDS - Activité Composants Distribution Service
North Shore Components
Semicontronic
$6.350
$6.191
$6.160
Continental Prestige Electronics
$8.158
Bastille Electronics
$7.909
$7.409
Corphita
$8.469
Modulus Dynamics
$8.892
Vigor
$9.710
Parana Technologies
$10.516
$9.780
IDEA Electronic Components Group
$11.308
$10.743
MARBEL Systems
$12.555
Texas Native Microelectronics
$14.431
$13.854
$13.421
$12.699
Corohmni
$14.731
Kenton Components
$17.317
$15.239
DigiPath Technology Company
$17.640
$16.935
Advanced Electronics
$19.697
$18.712
Aztec Data Supply Inc.
$20.991
Microchip USA
$34.580
$34.090
$33.840
$33.590
Qasali Group International
$38.964
Authorized Procurement Solutions
RC Electronics
$8.490
$7.750
$7.520
Argo Parts USA
Perfect Parts
A-Z Elektronik GmbH
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
Provides durable and reliable construction for the active filters.
Enables easy installation on circuit boards, saving space and simplifying assembly.
Offers versatility in filtering capabilities with multiple functions.
Utilizes CMOS technology for low power consumption and high performance.
Operates efficiently at a standard voltage level of 5V.
Provides a wide frequency range for diverse filtering needs.
Ensures compatibility with various circuit configurations and applications.
Offers different transfer characteristics for customizing filter responses.
Active Filters LTC1060CSW#PBF attributes and parameters. Explore more Active Filters devices from Analog Devices
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Nominal Negative Supply Voltage:
Semiconductor Technology:
Response Type:
Filter Technology:
Maximum Frequency - Cutoff or Center:
Minimum Frequency - Cutoff or Center:
Transfer Characteristics:
Poles and Zeros:
Maximum Operating Temperature:
Minimum Operating Temperature:
Moisture Sensitivity Level (MSL):
Soldering Temperature:
Temperature Grade:
Reflow Temperature Time Limit:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Qualified:
LTC1060CSW#PBF Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
First Components International
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Pro-an Electronic
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
MAX7426EUA+T
Analog Devices
Analog Devices' MAX7426EUA+T is a BICMOS active filter with 5 poles and 0 zeros, operating b/w -40 to 85 °C. It features a lowpass response type with an elliptic transfer characteristic, ideal for industrial applications requiring a cutoff frequency range of 0.001 kHz to 9 kHz. The compact square package has gull wing terminals and requires a supply voltage of 4.5V to 5.5V at a max current of 1mA.
MAX264BEWI+T
SWITCHED CAPACITOR FILTER; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3;
TLC04CP/MF4A-50CP
TLC04CP/MF4A-50CP by Texas Instruments is an active filter with 8 terminals, CMOS technology, and a max supply current of 3 mA. It operates at temperatures from 0 to 70°C, has a cutoff frequency range up to 40 kHz, and is ideal for lowpass filtering applications in commercial-grade environments.
LTC1565-31CS8#TRPBF
LTC1565-31CS8#TRPBF by Analog Devices is a small outline active filter with 7 poles, 0 zeros, and a cutoff frequency range of 650 kHz. It operates on a supply voltage b/w 4.75V to 11V, making it ideal for lowpass filtering applications in commercial temperature environments. The package is surface mountable with gull wing terminals and matte tin finish.
MAX7410CUA+
Analog Devices' MAX7410CUA+ is a CMOS active filter with 5 poles and 0 zeros, operating b/w 0-70°C. It has a lowpass Butterworth response type with a cutoff frequency range of 0.001 kHz to 15 kHz. Ideal for applications requiring switched capacitor filters in commercial temperature grade environments.
LTC1562CG
LTC1562CG by Analog Devices is a CMOS active filter with 4 functions, -5V to 5V supply voltage range, and 150kHz max cutoff frequency. Ideal for continuous time filtering applications in commercial temperature environments. Package: PLASTIC/EPOXY, GULL WING terminals, small outline shape.
LTC1065IN8
LTC1065IN8 by Analog Devices is an 8-terminal active filter with a max cutoff frequency of 50 kHz. It operates in an industrial temperature range from -40 to 85 °C and has a lowpass response type with Bessel transfer characteristics. This switched capacitor filter is commonly used in applications requiring precise signal filtering and conditioning.
MAX295ESA+T
Analog Devices' MAX295ESA+T is an active filter with 8 poles and 0 zeros, operating at a cutoff frequency range of 50 kHz. It features lowpass Butterworth transfer characteristics, suitable for industrial applications requiring precise signal filtering. With a compact rectangular package style and gull wing terminals, it offers reliable performance in a small outline design.
MAX261BENG-T
Analog Devices' MAX261BENG-T is a CMOS active filter with 2 functions, -6.3V to 6.3V supply voltage range, and digitally programmable transfer characteristics. Ideal for industrial applications requiring a universal response type and a cutoff frequency range of 0.0005 kHz to 57 kHz. Package style: in-line, terminals: dual, and temperature range: -40 °C to 85°C.
LTC1164CSW#TRPBF
LTC1164CSW#TRPBF by Analog Devices is a CMOS active filter with 4 functions, -8V to 8V supply voltage range, and 20 kHz cutoff frequency. Ideal for industrial applications requiring universal response types in a compact small outline package.
MF10ACN
The Texas Instruments MF10ACN is a CMOS active filter with 2 functions, operating at ±5V power supplies. It features a max supply current of 10mA and can handle temperatures from 0 to 70°C. Ideal for applications requiring switched capacitor filters with resistor programmable transfer characteristics.
LTC1264CSW#TRPBF
LTC1264CSW#TRPBF by Analog Devices is a 24-terminal active filter with -8V to 8V supply voltage range. It features switched capacitor technology, operates from -40 °C to 85°C, and offers Butterworth/Chebyshev response types. Ideal for industrial applications requiring universal transfer characteristics at frequencies up to 250 kHz.
MAX274AEWI+
Analog Devices' MAX274AEWI+ is an active filter with 30mA Isup, -5.5V Vsup, and 85°C max operating temp. Ideal for industrial applications requiring precise signal filtering in a compact 28-terminal package with surface mount capability.
MAX7400ESA-T
Maxim Integrated
MAX7400ESA-T by Maxim Integrated is an active filter with a switched capacitor technology, operating at 5V with 3.5mA supply current. It features a lowpass response type, elliptic transfer characteristics, and a cutoff frequency range of 10kHz. Ideal for industrial applications requiring precise signal filtering in a compact SMD package.
MF4A-50MP
The Texas Instruments MF4A-50MP is a CMOS active filter with 8 terminals and a cutoff frequency range of 0.0001 kHz to 40 kHz. It operates on +-2.5/+-5 V power supplies, has a lowpass response type, and follows the Butterworth transfer characteristics. Ideal for military applications due to its MILITARY temperature grade and through-hole package style.
LTC1064-3CN#PBF
LTC1064-3CN#PBF by Analog Devices is a CMOS active filter with -8V to 8V supply voltage range. It features 8 poles, 0 zeros, and a cutoff frequency of 95 kHz. Ideal for industrial applications requiring lowpass Bessel response filters in an in-line package style.
MAX7410CUA+T
Analog Devices' MAX7410CUA+T is a CMOS active filter with 5 poles and 0 zeros, operating b/w 0-70°C. It has a lowpass Butterworth response type, cutoff frequency range of 0.001 kHz to 15 kHz, and requires a supply voltage of 4.5-5.5V. Ideal for applications requiring precise signal filtering in compact spaces.
LTC1064ACN#PBF
LTC1064ACN#PBF by Analog Devices is a 24-terminal active filter with 4 functions. It operates at -40 to 85 °C and has a cutoff frequency range of 0.0001 kHz to 140 kHz. Ideal for industrial applications, it features resistor programmable transfer characteristics in a rectangular package with through-hole terminals.
MAX274BENG-T
MAX274BENG-T by Analog Devices is an active filter with 24 terminals, operating at -40 to 85 °C. It has a supply voltage range of 2.37V to 5.5V and is ideal for industrial applications requiring precise signal filtering in a compact rectangular package.
LTC1069-1IN8
LTC1069-1IN8 by Analog Devices is an 8-terminal CMOS active filter with a lowpass response type and elliptic transfer characteristics. It operates in an industrial temperature range from -40 to 85 °C, with a max cutoff frequency of 8 kHz. This switched capacitor filter is commonly used in applications requiring precise signal filtering and processing.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
LTC1060CSW#PBF
Linear Technology
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Response Type: UNIVERSAL;
LTC1569IS8-7#PBF
LTC1569IS8-7#PBF by Analog Devices is a small outline active filter with continuous time filtering, 10 poles and 0 zeros. It operates in an industrial temperature range from -40 to 85°C, with a cutoff frequency of up to 150 kHz. Ideal for lowpass applications, it offers pin or resistor programmable transfer characteristics.
CONTINUOUS TIME FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Response Type: LOWPASS;
LTC1563-2CGN#PBF
LTC1563-2CGN#PBF by Analog Devices is a 16-terminal active filter with continuous time filtering, operating b/w 0 to 70°C. It features a lowpass response type with Butterworth transfer characteristics and a max cutoff frequency range of 256 kHz. This small outline, surface-mount device is commonly used in commercial applications requiring precise signal filtering.
CONTINUOUS TIME FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: LOWPASS;
LTC1569IS8-7
LTC1569IS8-7#TRPBF
LTC1064-2CN#PBF
SWITCHED CAPACITOR FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Response Type: LOWPASS;
LTC1569IS8-7#TR
LTC1060CSW#TRPBF
LTC1060CSW#TRPBF by Analog Devices is a CMOS active filter with 2 functions. It has a max operating temperature of 85°C and a min supply voltage of 2.37V. This switched capacitor filter is commonly used in industrial applications for its universal response type and transfer characteristics (Butterworth/Bessel/Chebyshev).
LTC1563-2IGN#TRPBF
CONTINUOUS TIME FILTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Response Type: LOWPASS;
LTC1563-2IGN#PBF
LTC1060CS
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved