Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
AZTECH Wire
$8.960
Parana Technologies
$12.798
$13.264
DigiPath Technology Company
$14.092
ChromeModa Solutions
$14.380
$11.792
IDEA Electronic Components Group
$13.661
$12.942
One Stop Electronics
$47.500
Corphita
Graphics Display Drivers LP5521YQX attributes and parameters. Explore more Graphics Display Drivers devices from National Semiconductor
Data Input Mode:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Minimum fmax:
LP5521YQX Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rectron
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
International Semiconductor
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
HV5523K7-G
HV5523K7-G by Microchip Technology is a graphics display driver with SERIAL data input mode. It operates b/w -40 to 85 °C and has a max supply voltage of 5.5 V. Ideal for industrial applications, it features 32 segments, true output polarity, and a terminal pitch of 0.5 mm.
CAT4237TD-GT3
CAT4237TD-GT3 by Onsemi is a Graphics Display Driver with 5.5V max supply voltage, 2.8V min supply voltage, and 85°C max operating temp. Ideal for LED display driver applications due to its compact size, CMOS technology, and industrial temperature grade suitability.
ICM7228AIPIZ
Renesas Electronics
ICM7228AIPIZ by Renesas Electronics is a graphics display driver with 8-digit, 7-segment display mode. It operates at a supply voltage range of 4.5V to 5.5V and has an industrial temperature grade of -40°C to 85°C. This LED display driver is commonly used in applications requiring precise and efficient graphics display control.
PCF85176H/1,518
NXP Semiconductors
PCF85176H/1,518 by NXP Semiconductors is a graphics display driver with dot matrix display mode and serial data input. It operates at 1.8-5.5V, suitable for industrial applications. With 64 terminals and small outline package style, it offers multiplexed display capability for liquid crystal displays.
BCR420UW6-7
BCR420UW6-7 by Diodes Inc. is a small outline LED display driver with 6 terminals and matte tin finish. It operates b/w -55°C to 150°C, has a peak reflow temp of 260°C, and measures 3mm in length. Ideal for graphics displays, this driver offers true output polarity and standard input characteristics.
ICM7218AIPI+
Maxim Integrated
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
TLC5927IPWPR
TLC5927IPWPR by Texas Instruments is a graphics display driver with 24 terminals, operating voltage of 3-5.5V, and constant-current output for LED displays. It features a serial data input mode, small outline package style, and dual terminal position. Ideal for automotive applications due to its wide temperature range (-40 to 125°C) and moisture sensitivity level of 2.
TLC5916IDRG4
TLC5916IDRG4 by Texas Instruments is a graphics display driver with 16 terminals, operating voltage of 3-5.5V, and constant-current output. It is used in automotive applications for segment display mode with serial data input at temperatures ranging from -40 to 125°C.
LP5009PWR
LP5009PWR by Texas Instruments is a graphics display driver with 9 channels, operating at -40 to 85°C. It features a serial data input mode, 24 terminals in a small outline package, and supports true output polarity. Ideal for LED displays, it has a low profile design with a max supply voltage of 5.5V and terminal pitch of 0.65mm.
MIC3289-24YD6-TR
MIC3289-24YD6-TR by Microchip Technology is a Graphics Display Driver with 6 terminals, operating voltage range of 2.5V to 6.5V, and temperature grade suitable for automotive applications. It features a small outline package style, true output polarity, and nickel palladium gold terminal finish. Ideal for LED display driver interface ICs in automotive electronics due to its compact size and wide operating temperature range.
LT3797EUKG#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 52; Package Code: HVQCCN; Package Shape: RECTANGULAR;
AL6562AS-13
AL6562AS-13 by Diodes Inc. is a LED display driver with 8 terminals, operating voltage range of 10.3V to 22V, and temp range of -25°C to 125°C. It comes in a small outline package suitable for graphics displays, offering dual terminal position and matte tin finish for surface mount applications.
LT3599EFE#TRPBF
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR;
ZXLD1366DACTC
ZXLD1366DACTC by Diodes Inc. is a graphics display driver with a max supply voltage of 60V and power supplies of 24V. It is used as an LED display driver in automotive applications, with a small outline package style and very thin profile.
LT3518IUF#PBF
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
AP3032KTR-G1
Bcd Semiconductor Manufacturing
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
LP5562TMX/NOPB
LP5562TMX/NOPB by Texas Instruments is a graphics display driver with 4 constant-current channels. It operates b/w -40 to 85 °C, with input via serial mode and power supplies of 3/5V. Ideal for LED displays, it features a very thin profile package style and terminal finish of Tin Silver Copper.
LP5009RUKR
LP5009RUKR by Texas Instruments is a graphics display driver with 9 channels and segments. It operates b/w -40 to 85°C, with a supply voltage range of 2.7V to 5.5V. Ideal for LED displays, it features a serial data input mode and comes in a square chip carrier package style.
LT3476EUHF#PBF
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR;
CPC9909NETR
Littelfuse
CPC9909NETR by Littelfuse is a graphics display driver with a max supply voltage of 550V. It has a small outline, heat sink package style and operates at temperatures ranging from -40 to 85°C. This LED display driver is commonly used in applications requiring constant-current output characteristics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
National Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved