Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NXP Semiconductors' PCA9532PW/S908,118 is a serial graphics display driver with 24 terminals. It operates b/w -40 to 85 °C and supports LED displays with 16 segments. The small outline package has a max supply voltage of 5.5 V, making it ideal for industrial applications.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Flip Electronics
Anansix
Vyrian
Nova Conductors
Advanced Electronics
$4.637
$4.405
Microchip USA
$8.255
Aztec Data Supply Inc.
$13.120
AZTECH Wire
$19.530
$18.760
$18.380
$18.010
One Stop Electronics
$20.500
Ampacity Inc.
$41.500
Continental Prestige Electronics
Argo Parts USA
UNI Independent Distributors
Corphita
Bastille Electronics
The use of plastic/epoxy as the package body material makes the product lightweight and durable, ideal for portable devices.
The serial data input mode enables easy communication with other devices, allowing for quick and efficient data transfer.
Being surface mountable makes the product easy to integrate onto circuit boards, saving space and simplifying assembly processes.
With a high maximum supply voltage, the product can withstand voltage fluctuations and operate reliably in various electrical environments.
Having 24 terminals allows for a more versatile connection interface, accommodating various input and output signals for enhanced functionality.
The high maximum operating temperature ensures that the product can perform consistently even in demanding industrial environments with elevated temperatures.
The compact width of 4.4 mm enables space-efficient designs, making the product suitable for applications where size is a critical factor.
The nominal supply voltage of 3.3V ensures compatibility with common power sources, making it easy to integrate into existing systems.
Graphics Display Drivers PCA9532PW/S908,118 attributes and parameters. Explore more Graphics Display Drivers devices from NXP Semiconductors
Data Input Mode:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Minimum fmax:
PCA9532PW/S908,118 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Dc Components
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1554216002
WIRE AND CABLE;
BCR402UW6Q-7
Diodes Incorporated
Diodes Incorporated's BCR402UW6Q-7 is a graphics display driver with a max supply voltage of 40V, AEC-Q101 screening level, and 6 terminals. It is designed for LED display driver applications, featuring a small outline package style and dual terminal position for compact designs.
TLD5190QVXUMA1
Infineon Technologies
TLD5190QVXUMA1 by Infineon Technologies is a Graphics Display Driver with 48 terminals, suitable for LED display driver applications. It operates at a supply voltage range of 8-36 V and has a compact square package style with dimensions of 7x7 mm. This IC meets AEC-Q100 standards and features a moisture sensitivity level of MSL3.
HV9910BNG-G-M901
Microchip Technology
HV9910BNG-G-M901 by Microchip is a LED display driver with 16 terminals, operating voltage range of 8-450V. Ideal for automotive applications, it has TS16949 screening and operates b/w -40 to 125°C. The small outline package measures 9.9mm x 3.9mm with a seated height of 1.75mm, making it suitable for compact designs.
FAN5702UC15X
FAN5702UC15X by Fairchild Semiconductor is a graphics display driver with serial data input mode and a max supply voltage of 5.5V. It is used as an LED display driver in industrial applications.
FAN5702UMP15X
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
TLC5940PWPRG4
TLC5940PWPRG4 by Texas Instruments is a graphics display driver with 16 channels, dot matrix display mode, and serial data input. It operates b/w -40 to 85 °C and has a max supply voltage of 5.5 V. Ideal for LED displays in industrial applications due to its small outline package style and open-drain output characteristics.
BCR420UFDQ-7
BCR420UFDQ-7 by Diodes Inc. is a graphics display driver with AEC-Q101 screening level. It features 6 terminals, small outline package style, and nickel palladium gold terminal finish. Ideal for LED display driver applications due to its compact size (2x2 mm) and surface mount capability.
LP8556TME-E05/NOPB
LP8556TME-E05/NOPB by Texas Instruments is a Graphics Display Driver with 12V power supply, 6 channels, and 12 segments. It operates b/w -30 to 85°C, has a terminal pitch of 0.4mm, and uses serial data input mode. Ideal for LED display driver applications due to its thin profile and fine pitch package style.
LED2000PUR
STMicroelectronics
LED DISPLAY DRIVER; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;
TPS61161ADRVR
TPS61161ADRVR by Texas Instruments is a LED display driver with 6 terminals, operating voltage range of 2.7V to 18V, and low supply current of 1.8mA. Ideal for graphics displays, it features a small outline package with very thin profile suitable for industrial applications at temperatures ranging from -40°C to 85°C.
LM3409MYX/NOPB
National Semiconductor
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
MAX7221CWG+
Analog Devices
MAX7221CWG+ by Analog Devices is a graphics display driver with 8-digit, 7-segment display capability. It operates on a supply voltage range of 4V to 5.5V and has a max operating temperature of 70°C. This IC is commonly used in LED display applications requiring serial data input mode and small outline package style.
TPS61160DRVTG4
TPS61160DRVTG4 by Texas Instruments is a LED display driver with 6 terminals, operating voltage range of 2.7V to 18V, and low supply current of 1.8mA. Ideal for graphics displays, it has a small outline package style and industrial temperature grade suitability.
IS31FL3731-SALS2
Integrated Silicon Solution
IS31FL3731-SALS2 by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with 144 segments. It operates b/w -40 to 85 °C and supports SERIAL data input mode. This small outline, surface mount package is ideal for industrial applications requiring precise graphics display control.
LT3497EDDB#TRMPBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: RECTANGULAR;
LP55231SQE/NOPB
LP55231SQE/NOPB by Texas Instruments is a graphics display driver with 9 channels and constant-current output. It operates at 2.7-5.5V, -40 to 85°C, with a max supply current of 0.95mA. Ideal for LED displays, it features serial data input mode and multiplexed display capability in a square chip carrier package style.
MM5450YN
Micrel
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
TPS92662AQPHPRQ1
TPS92662AQPHPRQ1 by Texas Instruments is a 48-terminal LED display driver with 12 channels. It operates b/w -40 to 125 °C and supports a max supply voltage of 60 V. Ideal for automotive applications, it features a serial data input mode and quad terminal position.
PCA9635PW,118
NXP Semiconductors
PCA9635PW,118 by NXP Semiconductors is a Graphics Display Driver with 16 segments. It operates b/w -40 to 85 °C and supports a serial data input mode. This LED display driver has a small outline package style and is suitable for industrial applications.
TCA6507PWRG4
TCA6507PWRG4 by Texas Instruments is a graphics display driver with 14 terminals, operating voltage range of 1.65V to 3.6V, and max supply current of 0.04mA. It features serial data input mode, open-drain output characteristics, and small outline package style for LED display driver applications in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PCA9685PW/Q900,118
NXP Semiconductors' PCA9685PW/Q900,118 is a 28-terminal LED display driver with serial data input mode and 16 segments. Operating b/w -40 to 85 °C, it supports a supply voltage range of 2.3-5.5 V for industrial applications requiring precise graphics display control in compact spaces.
PCA9685PW,112
PCA9685PW,112 by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 16 segments. It operates b/w -40 to 85 °C and supports a supply voltage range of 2.3-5.5 V. Ideal for industrial applications due to its small size and low power consumption.
PCA9685BS,118
PCA9685BS,118 by NXP Semiconductors is a graphics display driver with serial data input mode. It operates b/w -40 to 85 °C and supports a max supply voltage of 5.5 V. Ideal for LED displays, it comes in a square chip carrier package style with 28 terminals and terminal finish of nickel palladium gold.
PCA9685PW,118
PCA9685PW,118 by NXP Semiconductors is a LED display driver with 16 segments. It operates at 1 MHz max frequency and supports serial data input mode. Ideal for graphics displays, it has a small outline package style and can handle industrial temperature grades up to 85°C.
PCA9532BS,118
PCA9532BS,118 by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 16 segments. It operates b/w -40 to 85 °C and supports supply voltages of 2.3-5.5 V. Ideal for industrial applications requiring precise graphics display control in compact spaces.
PCA9955BTWJ
PCA9955BTWJ by NXP Semiconductors is a graphics display driver with 28 terminals and a small outline, thin profile package style. It operates at temperatures ranging from -20 to 85 °C and has a moisture sensitivity level of 1. This LED display driver is suitable for various applications requiring precise control of graphics displays.
PCA9956BTWY
PCA9956BTWY by NXP Semiconductors is a Graphics Display Driver with 24 segments, operating at -40 to 85 °C. It has a serial data input mode, small outline package style, and can handle supply voltages from 3V to 5.5V. Ideal for LED display driver applications in industrial settings due to its multiplexed display capability and gull wing terminal form.
PCA9635PW/Q900,118
NXP Semiconductors' PCA9635PW/Q900,118 is a serial graphics display driver with 16 segments. It operates b/w -40 to 85 °C and supports a supply voltage range of 2.3-5.5 V. Ideal for LED displays, this IC has a small outline package with 28 terminals and AEC-Q100 screening level.
PCA9632DP2Z
PCA9632DP2Z by NXP Semiconductors is a LED display driver with 10 terminals, operating voltage range of 2.3V to 5.5V, and serial data input mode. It has a small outline package style suitable for graphics displays applications, with standard input characteristics and max frequency of 1MHz.
PCA9622DR,118
PCA9622DR,118 by NXP Semiconductors is a LED display driver with 16 segments. It operates at 1 MHz max frequency and supports serial data input mode. Ideal for industrial applications, it has a small outline package style and can handle supply voltages ranging from 2.3V to 5.5V.
PCA9624BS,118
PCA9624BS,118 by NXP Semiconductors is a Graphics Display Driver with 24 terminals, operating voltage range of 2.3V to 5.5V, and serial data input mode. It comes in a square chip carrier package suitable for LED display driver applications in industrial settings at temperatures ranging from -40°C to 85°C.
PCA9955BTW/Q900J
NXP Semiconductors' PCA9955BTW/Q900J is a graphics display driver with 28 terminals and a small outline, thin profile package. It operates at temperatures ranging from -20 to 85 °C and supports LED displays. Its surface mount capability and moisture sensitivity level of 1 make it suitable for various applications.
PCA9685PW
PCA9685PW by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 16 segments. It operates b/w -40 to 85 °C and supports supply voltages of 2.3-5.5 V, making it ideal for industrial applications requiring precise graphics display control.
PCA9634D,118
PCA9634D,118 by NXP Semiconductors is a Graphics Display Driver with 8 segments. It operates at 1 MHz max frequency and supports LED displays. This IC has a serial data input mode and can handle supply voltages from 2.3V to 5.5V, making it ideal for industrial temperature applications.
PCA9632DP1,118
NXP Semiconductors' PCA9632DP1,118 is a serial graphics display driver with 8 terminals and a supply voltage range of 2.3V to 5.5V. It operates in industrial temperatures (-40°C to 85°C) and has a max frequency of 1MHz. Ideal for LED displays, this IC comes in a small outline package with gull wing terminals for surface mounting applications.
PCA9685BS
PCA9685BS by NXP Semiconductors is a Graphics Display Driver with 16 segments, SERIAL data input mode, and 1 MHz min fmax. It is ideal for LED display driver applications due to its industrial temperature grade, quad terminal position, and very thin profile package style.
PCA9632DP2,118
NXP Semiconductors' PCA9632DP2,118 is a graphics display driver with 10 terminals and serial data input mode. It operates b/w -40 to 85°C, with a supply voltage range of 2.3-5.5V. Ideal for LED displays, it has a small outline package style and Gull Wing terminal form.
PCA9632TK,118
NXP Semiconductors' PCA9632TK,118 is a serial input LED display driver with 4 segments. It operates b/w -40 to 85°C and supports a supply voltage range of 2.3-5.5V. Ideal for industrial applications requiring small outline, thin profile packages.
PCA9635PW/S911,118
NXP Semiconductors' PCA9635PW/S911,118 is a serial LED display driver with 16 segments. It operates b/w -40 to 85 °C and supports a supply voltage range of 2.3-5.5 V. Ideal for industrial applications requiring precise graphics display control in compact spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved