Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 3; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
Median Price
$0.699
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.545
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.719
$0.662
$0.620
Verical
TME
$0.304
Nova Conductors
$0.655
Bristol Electronics
$1.800
$0.666
$0.468
Dan-Mar Components
Vyrian
Ampacity Inc.
$0.275
Semicontronic
$0.416
$0.406
$0.404
Aranea Global
$0.642
$0.616
Component Stockers USA
$0.650
$0.440
$0.420
Argo Parts USA
$0.635
Continental Prestige Electronics
Advanced Electronics
Aztec Data Supply Inc.
$10.490
Corohmni
$14.154
Kepictronics
Fulton Briggs Corp.
Perfect Parts
Lixinc
Robosynatics
$0.021
Lucentia Tech
Graphics Display Drivers CL525K4-G attributes and parameters. Explore more Graphics Display Drivers devices from Supertex
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
CL525K4-G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - CL520/CL525 Datasheet 19/Dec/2018
PCN Assembly/Origin - Assembly 06/Dec/2016
PCN Packaging - Label and Packing Changes 23/Sep/2015 MBB/Label Chgs 16/Nov/2018
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
First Components International
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Plessey Semiconductors Discrete Components Div
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AP3031KTR-G1
Bcd Semiconductor Manufacturing
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
MP2489DJ-LF-Z
Monolithic Power Systems
MP2489DJ-LF-Z by Monolithic Power Systems is a LED display driver with a supply voltage range of 6V to 60V. It operates in industrial temperatures from -40°C to 85°C, making it suitable for various graphics display applications. This small outline package has dual terminals and a max seated height of 1mm, ideal for compact designs.
TPS92518QPWPTQ1
TPS92518QPWPTQ1 by Texas Instruments is a graphics display driver with 2 channels, operating voltage range of 6.5V to 42V, and AEC-Q100 screening for automotive applications. It features a small outline package with 24 terminals, Gull Wing terminal form, and serial data input mode for LED displays. The IC has a temperature grade suitable for automotive use (-40°C to 125°C) and is designed for surface mount assembly with a max seated height of 1.2mm.
LM3410XMYE/NOPB
LM3410XMYE/NOPB by Texas Instruments is a graphics display driver with 8 terminals, operating from -40 to 125 °C. It has a supply voltage range of 2.7-5.5 V and is suitable for automotive applications as an LED display driver with a small outline package style.
LP5562TME/NOPB
LP5562TME/NOPB by Texas Instruments is a graphics display driver with 4 channels and constant-current output. It operates b/w -40 to 85 °C, with a supply voltage range of 1.65-5.5 V. Ideal for LED display drivers in industrial applications due to its thin profile and fine pitch package style.
TL4242DRJR
TL4242DRJR by Texas Instruments is a graphics display driver with 8 terminals, operating voltage range of 4.5V to 42V, and constant-current output. It is suitable for automotive applications due to its small outline package style, dual terminal position, and nickel palladium gold finish. With an operating temperature range of -40°C to 125°C, it offers reliable performance in various environments.
PCF8577CTD
NXP Semiconductors
PCF8577CTD by NXP Semiconductors is a Graphics Display Driver with DOT MATRIX display mode, SERIAL data input. It operates b/w -40 to 85 °C and supports multiplexed display. Ideal for industrial applications requiring a CMOS technology-based LIQUID CRYSTAL DISPLAY DRIVER interface IC.
BCR402WH6327XTSA1
Infineon Technologies
BCR402WH6327XTSA1 by Infineon Technologies is a LED display driver with 4 terminals, small outline package style, and 10V nominal voltage. It is used in graphics display drivers for applications requiring surface mount technology and thin profile packages.
MAX20090ATP/VY+T
Maxim Integrated
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Screening Level: AEC-Q100; Peak Reflow Temperature (C): 260;
TPS92518PWPT
TPS92518PWPT by Texas Instruments is a graphics display driver with 2 channels and serial data input mode. It operates b/w -40 to 125 °C, with a supply voltage range of 6.5-42 V. Ideal for automotive applications due to its small outline package style and high temperature grade.
LT3591EDDB#PBF
Analog Devices
Analog Devices' LT3591EDDB#PBF is a LED display driver with 5 segments, operating voltage range of 2.5V to 12V, and industrial temperature grade. Ideal for graphics displays, it features a small outline package style and dual terminal position for compact designs in various applications.
TPS61161DRVR
TPS61161DRVR by Texas Instruments is a graphics display driver with 6 terminals, operating voltage range of 2.7V to 18V, and low supply current of 1.8mA. Ideal for LED displays, it has a small outline package with very thin profile and operates in industrial temperature range from -40°C to 85°C.
ICM7228AIBIZ
Renesas Electronics
ICM7228AIBIZ by Renesas Electronics is a LED display driver with 8-digit, 7-segment display mode. It operates at 4.5-5.5V supply voltage range and industrial temperature grade of -40 to 85°C. With small outline package style, it's ideal for graphics displays in various applications.
TLC5925IDWRG4
TLC5925IDWRG4 by Texas Instruments is a graphics display driver with 16 segments, serial data input mode, and constant-current output. Ideal for LED displays in automotive applications due to its small outline package style and dual terminal position. Operating temperature ranges from -40 to 125°C.
LP55231SQE/NOPB
LP55231SQE/NOPB by Texas Instruments is a graphics display driver with 9 channels and constant-current output. It operates at 2.7-5.5V, -40 to 85°C, with a max supply current of 0.95mA. Ideal for LED displays, it features serial data input mode and multiplexed display capability in a square chip carrier package style.
MAX20090ATP/VY+
LED DISPLAY DRIVER; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
MAX7219EWG+T
MAX7219EWG+T by Analog Devices is a Graphics Display Driver with 8-DIGIT display capability. It operates at 4-5.5V, -40 to 85°C, and has a serial data input mode for LED displays. Ideal for industrial applications requiring multiplexed segment displays in a small outline package.
PCA9635PW,118
PCA9635PW,118 by NXP Semiconductors is a Graphics Display Driver with 16 segments. It operates b/w -40 to 85 °C and supports a serial data input mode. This LED display driver has a small outline package style and is suitable for industrial applications.
LM3410YMF/NOPB
LM3410YMF/NOPB by Texas Instruments is a small outline LED display driver with 5 terminals and a supply voltage range of 2.7V to 5.5V. It operates in automotive-grade temperatures from -40°C to 125°C, making it suitable for various graphic display applications requiring high reliability and performance. With a compact design and surface-mount capability, this driver is ideal for space-constrained electronic devices.
TLC5927IPWPRG4
TLC5927IPWPRG4 by Texas Instruments is a graphics display driver with 24 terminals, operating voltage range of 3-5.5V, and serial data input mode. Ideal for LED displays in automotive applications due to its compact size, high temperature tolerance up to 125°C, and low power consumption at 3.3V supply voltage.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CL525K4-G
Microchip Technology
CL525K4-G by Microchip Technology is a Graphics Display Driver with 3 terminals, operating voltage range of 4.75-90 V, and automotive temperature grade. It is used for LED display driving applications in automotive environments due to its TS 16949 screening level and small outline package style.
CL525N3-G
Supertex
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: FLAT; No. of Terminals: 3; Package Shape: RECTANGULAR; Maximum Supply Voltage: 90 V;
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Code: TO-92; Package Shape: RECTANGULAR;
CL520K4-G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 3; Package Code: TO-252; Package Shape: RECTANGULAR;
CL520N3-G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: FLAT; No. of Terminals: 3; Package Code: TO-92; Package Shape: RECTANGULAR;
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 3; Package Shape: RECTANGULAR; Surface Mount: YES;
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: FLAT; No. of Terminals: 3; Package Shape: RECTANGULAR; Multiplexed Display Capability: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved