Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$2.600
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Arrow
1+ parts
$0.994
100+ parts
-
1k+ parts
10k+ parts
Farnell
$1.610
$1.180
Texas Instruments
$2.699
$2.365
$1.336
Newark
$3.080
$2.260
$1.920
DigiKey
$4.220
$2.661
$2.423
$2.298
Mouser Electronics
$2.450
$2.370
$2.230
Element14
$5.130
$3.770
$2.700
$2.470
Rochester
$1.860
$1.670
$1.570
Verical
$2.087
$1.962
Chip1Stop
$1.807
$1.782
Avnet
$1.594
$1.498
Flip Electronics
$0.349
Digiode
$1.539
Nova Conductors
$2.349
Chip Stock
Vyrian
Anansix
EMSNET
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Connector Distribution Corp
Right Parts Inc.
PC Components Company LLC
Bristol Electronics
NPI Materials, Inc.
Semi Source
Semicontronic
$1.380
$1.346
$1.339
Ampacity Inc.
Corphita
$1.458
Component Stockers USA
$1.890
$1.780
Continental Prestige Electronics
$2.302
Netroflash
$2.231
$2.184
Argo Parts USA
Corohmni
$6.953
Parana Technologies
$10.414
$10.926
DigiPath Technology Company
$11.467
$10.550
ChromeModa Solutions
$11.701
$9.595
IDEA Electronic Components Group
$11.116
$10.531
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Perfect Parts
Lixinc
XScomponents
MOSFET Gate Drivers LM9061M/NOPB attributes and parameters. Explore more MOSFET Gate Drivers devices from National Semiconductor
High Side Driver:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
LM9061M/NOPB Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Copper Wire Update 14/May/2015
PCN Assembly/Origin - Mult Dev Wafer Fab Transfer 13/May/2019
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM555CM
National Semiconductor
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
LM5106MM/NOPB
LM5106MM/NOPB by Texas Instruments is a MOSFET gate driver with 2 channels, 1.8A output current, and 12V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on time of 0.69us. Ideal for driving high-side MOSFETs in automotive applications.
UCC27323DGNR
UCC27323DGNR by Texas Instruments is a MOSFET gate driver with 2 functions, operating at supply voltages of 4.5-15V. It features a small outline package style suitable for automotive applications, with inverted output polarity and peak output current of 4A. Ideal for driving MOSFETs in automotive systems requiring fast turn-on/off times.
ISL6144IVZA-T7A
Intersil
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
HIP4082IBZ
Renesas Electronics
HIP4082IBZ by Renesas Electronics is a MOSFET gate driver with a max supply voltage of 15V. It has a small outline package style and can operate in temperatures ranging from -55°C to 125°C. This driver is commonly used in military applications due to its temperature grade and moisture sensitivity level.
UCC21540ADWK
UCC21540ADWK by Texas Instruments is a MOSFET gate driver with 2 channels, capable of driving high side and low side drivers. It operates at temperatures ranging from -40 to 125°C, with a supply voltage range of 3-18V. With a compact rectangular package style and dual terminal position, it is ideal for automotive applications requiring precise control over MOSFETs or IGBTs.
ISO5852SDWR
ISO5852SDWR by Texas Instruments is a MOSFET gate driver with a max supply voltage of 5.5V and max output current of 5A. It is commonly used in automotive applications due to its small outline package style and temperature grade.
LM5109BSD/NOPB
LM5109BSD/NOPB by Texas Instruments is a MOSFET gate driver with 2 channels, 12V nominal voltage, and 1A max output current. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 0.056us. Ideal for high side driving applications requiring fast switching speeds.
MIC4427YMM-TR
Microchip Technology
MIC4427YMM-TR by Microchip Technology is a MOSFET Gate Driver with 2 functions, operating at supply voltages b/w 4.5V to 18V. It features a Totem-Pole output and Gull Wing terminal form, suitable for industrial applications requiring high side drivers. With a turn-on time of 0.08 us and turn-off time of 0.1 us, it offers precise control in various electronic systems.
HIP4080AIPZ
HIP4080AIPZ by Renesas Electronics is a MOSFET Gate Driver with 20 terminals, operating voltage range of 9.5V to 15V, and turn-on/off times of 0.14us and 0.11us respectively. It is designed for full bridge based applications requiring high side driver functionality at temperatures ranging from -40°C to 85°C.
LT1161CSW#TRPBF
Linear Technology
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
LTC7003MPMSE#PBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.1 mm;
IR2181STRPBF
Infineon Technologies
IR2181STRPBF by Infineon is a MOSFET gate driver with max supply voltage of 20V, suitable for automotive applications. It features a turn-on time of 0.27us and turn-off time of 0.33us, making it ideal for high side driver operations. With a package style of small outline and dual terminal position, this CMOS technology driver offers precise control in compact designs.
FAN73832MX
FAN73832MX by Onsemi is a MOSFET gate driver with 20V max supply voltage, 15V power supplies, and -40 to 125°C operating temperature range. It features under voltage protection, push-pull output characteristics, and dual terminal position. Ideal for automotive applications requiring a compact small outline package with gull wing terminals.
LT1910ES8#PBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LTC4444EMS8E#PBF
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HTSSOP; Package Shape: SQUARE;
UCC5390ECDWVR
UCC5390ECDWVR by Texas Instruments is a MOSFET gate driver with a max supply voltage of 33V and built-in transient and under voltage protections. It operates in automotive-grade temperatures, has a turn-on/off time of 0.1us, and can handle a max output current of 17A. Ideal for driving IGBT/MOSFETs in automotive applications.
UCC37322DGNG4
UCC37322DGNG4 by Texas Instruments is a MOSFET gate driver with a max supply voltage of 15V and a max output current of 9A. It is commonly used as a buffer or inverter based MOSFET driver in various applications requiring high-speed switching.
TC4468EOE
TC4468EOE by Microchip Technology is a MOSFET gate driver with 4 functions, operating at supply voltages of 4.5-18V. It features a totem-pole output and AND gate based interface IC type, suitable for industrial applications requiring high side drivers with quick turn-on/off times of 0.15 us.
LTC7000EMSE#TRPBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR;
LT1910ES8#TR
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM9061M/NOPB
LM9061MX/NOPB
LM9061M
LM9061MDC
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; Package Code: DIE; Package Shape: UNSPECIFIED; Terminal Position: UPPER;
LM9061MX
LM9061QDQ1
BUFFER OR INVERTER BASED MOSFET DRIVER; Screening Level: AEC-Q100;
LM9061QDRQ1
LM9061N
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved