Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Median Price
$0.434
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$0.488
100+ parts
$0.332
1k+ parts
$0.170
10k+ parts
-
DigiKey
$0.380
Nova Conductors
$0.388
Digiode
$0.464
Vyrian
Anansix
Cyclops Electronics Ltd
Corohmni
$0.247
Continental Prestige Electronics
$0.365
$0.358
Argo Parts USA
$0.354
Netroflash
$0.369
$0.361
Ampacity Inc.
$0.415
Corphita
$0.439
Parana Technologies
$1.746
$2.322
DigiPath Technology Company
$1.923
ChromeModa Solutions
$1.962
$1.609
IDEA Electronic Components Group
$1.766
Authorized Procurement Solutions
Lixinc
Kepictronics
Audio & Video Amplifiers LM4808MMX/NOPB attributes and parameters. Explore more Audio & Video Amplifiers devices from National Semiconductor
Nominal Bandwidth:
General IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Power:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LM4808MMX/NOPB General Purpose ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Design/Specification - VSSOP Pkg Copper Wire 07/Jun/2013
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Continental Device India
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
1N4148WT
Bharat Electronics
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
NC7WZ17P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Onsemi
PTAS2781RYYR
PTAS2781RYYR by Texas Instruments is a Class D audio amplifier with 1 channel and a nominal output power of 25W. It operates at temperatures ranging from -40 to 85°C and has a compact package style of CHIP CARRIER, VERY THIN PROFILE. This amplifier is suitable for audio and video applications requiring high-quality sound amplification in a small form factor.
IRS2092STRPBF
Infineon Technologies
Infineon's IRS2092STRPBF is a Class D audio amplifier with 2 channels, operating at 10-18V. With a small outline package and gull wing terminals, it's ideal for automotive applications. This IC has a nominal bandwidth of 0.02 kHz and low power consumption of 11mA, making it suitable for compact audio systems.
TLV320AIC3110IRHBT
TLV320AIC3110IRHBT by Texas Instruments is an audio amplifier IC with 2 channels and 1.29W output power. It operates in industrial temperature range (-40 to 85°C) with low harmonic distortion (10%). Suitable for audio applications, it has a compact square package style and surface-mount design for easy integration.
TPA2001D1PWG4
TPA2001D1PWG4 by Texas Instruments is an audio amplifier IC with 1W output power, 23.5dB gain, and 1% harmonic distortion. It operates at -40 to 85°C, supports supply voltages of 2.7-5.5V, and has a small outline package for industrial applications like portable audio devices.
TPA6110A2DGNR
TPA6110A2DGNR by Texas Instruments is an audio amplifier IC with 2 channels, 0.15W output power, and 0.1% harmonic distortion. It operates b/w -40 to 85°C, requires 2.5-5.5V supply voltage, and has a small outline package suitable for industrial applications like portable audio devices.
TDA2030A
TDA2030A by STMicroelectronics is a 5-terminal audio amplifier IC with a max supply current of 80mA. It comes in an IN-LINE package style with terminals in ZIG-ZAG position and THROUGH-HOLE form. Ideal for audio applications requiring efficient amplification in a compact PLASTIC/EPOXY package.
MAX5486EUG+
Analog Devices
Analog Devices' MAX5486EUG+ is a BICMOS audio amplifier IC with 2 channels, operating at -40 to 85°C. It has a power supply range of 2.7-5.5V and consumes max 1.4mA current. Ideal for audio applications requiring small outline, thin profile packages in industrial settings.
TPA0253DGQ
TPA0253DGQ by Texas Instruments is a small outline audio amplifier with 1W output power and 8dB gain. It operates b/w -40 to 85°C, with low 0.1% harmonic distortion and high 93dB noise figure. Ideal for industrial applications requiring compact, low-power audio amplification in surface-mount setups.
MAX9723DETE+
Analog Devices' MAX9723DETE+ is a Class AB audio amplifier with 2 channels and nominal output power of 0.06W. Operating b/w -40 to 85°C, it requires a supply voltage of 1.8-3.6V and draws a max current of 6.5mA. Ideal for audio applications in industrial settings due to its compact square package style and surface-mount compatibility.
LM4818MX/NOPB
LM4818MX/NOPB by Texas Instruments is an audio amplifier with 10% harmonic distortion, 0.35W output power, and 3mA max supply current. Ideal for industrial applications requiring a small outline package and operating temperatures from -40 to 85°C.
TDA1308T/N2,115
NXP Semiconductors
NXP Semiconductors' TDA1308T/N2,115 is an audio amplifier IC with 2 channels and 0.04W nominal output power. It operates b/w -40 to 85°C, with a harmonic distortion of 0.3%. Suitable for industrial applications, it has a small outline package style and requires a min supply voltage of 1.5V.
LM49350RLX/NOPB
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 36; Package Code: FBGA; Package Shape: SQUARE;
MAX9700BEUB-T
Maxim Integrated
MAX9700BEUB-T by Maxim Integrated is a 10-terminal audio amplifier with 1.6W output power, ideal for industrial applications. Operating b/w -40 to 85°C, it supports supply voltages of 2.5-5.5V and offers a gain of 12dB in a small outline package.
NJM12904M-(TE3)
NISSHINBO MICRO DEVICES INC
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: SQUARE;
TPA301DGNRG4
TPA301DGNRG4 by Texas Instruments is an audio amplifier IC with 0.5% harmonic distortion, 0.35W nominal output power, and 2.5V min supply voltage. It is designed for industrial applications requiring a small outline package with a square shape and dual terminal position.
LM6172IM
VIDEO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LME49811TB/NOPB
LME49811TB/NOPB by Texas Instruments is an audio amplifier IC with +-50/+-100V power supplies, 15 terminals, and 24mA max supply current. It operates b/w -20°C to 75°C, suitable for commercial extended temperature grade applications. The rectangular package style with flange mount makes it ideal for audio and video amplification needs.
TDA1514A
Philips Semiconductors
AUDIO AMPLIFIER; Temperature Grade: OTHER; No. of Terminals: 9; Minimum Operating Temperature: -25 Cel; JESD-609 Code: e0; Technology: BIPOLAR;
LM1875TLB05
LM1875TLB05 by National Semiconductor is an audio amplifier IC with 25W output power and 1% harmonic distortion. Operating at +-25V, it has a gain of 26dB and nominal bandwidth of 0.02 kHz. Ideal for audio applications requiring high-quality amplification in a compact FLANGE MOUNT package.
LM4864MM/NOPB
LM4864MM/NOPB by Texas Instruments is an audio amplifier IC with 1% harmonic distortion, 0.85W output power, and 0.02 kHz bandwidth. It is used in industrial applications for audio amplification in a small outline package with surface mount capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM4861MX/NOPB
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM4871MX/NOPB
LM4871MX/NOPB by Texas Instruments is an audio amplifier IC with 3W output power, 10% harmonic distortion, and 5V supply voltage. It is used in industrial applications requiring small outline package style for audio amplification.
LM4871MMX/NOPB
LM4871MMX/NOPB by Texas Instruments is a small outline, thin profile audio amplifier with a power supply of 5V. It has a nominal output power of 3W and operates in an industrial temperature range (-40 to 85°C). This amplifier is suitable for applications requiring high-quality audio amplification in compact devices.
LM4861MX
LM4871MM/NOPB
LM4880M
LM4861M/NOPB
LM4861M/NOPB by Texas Instruments is an audio amplifier IC with 1.6W output power and 26dB gain. It operates b/w -40 to 85°C, suitable for industrial applications. This CMOS technology device has a small outline package with surface mount capability, making it ideal for compact audio systems.
LM4871M/NOPB
LM4871MX
LM4861M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved