Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
$2.190
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$1.420
100+ parts
$1.093
1k+ parts
$0.575
10k+ parts
-
Chip1Stop
$2.030
$1.290
$1.190
Mouser Electronics
$2.350
$1.530
$1.240
$1.180
DigiKey
$2.420
$1.569
$1.289
$1.220
Newark
$2.430
$1.880
$1.770
Adafruit Industries
$2.667
$2.533
Arrow
$1.012
$0.796
$0.735
Verical
$1.288
$1.083
$0.990
Nova Conductors
$0.884
Digiode
$1.349
TME
$1.950
$1.230
$1.110
TEDSS.com
$2.000
Chip Stock
Vyrian
Anansix
Bristol Electronics
Martec Srl
R&J Components
Ampacity Inc.
$0.860
Semicontronic
$0.838
$0.834
Aranea Global
$0.866
$0.831
Argo Parts USA
Continental Prestige Electronics
Corphita
$1.278
Parana Technologies
$2.043
$2.566
ChromeModa Solutions
$2.295
$1.882
IDEA Electronic Components Group
$2.066
Advanced Electronics
Corohmni
$4.551
QUARKTWIN TECHNOLOGY LTD
Lixinc
Perfect Parts
A-Z Elektronik GmbH
Alle Elektronik GmbH
Authorized Procurement Solutions
DigiPath Technology Company
$2.069
iodParts Technologies Inc.
Futuretech Components
EMSNET (Excess)
Operational Amplifiers (Op Amps) LF412CN/NOPB attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from National Semiconductor
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Frequency Compensation:
Low-Bias:
Low-Offset:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Minimum Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Minimum Slew Rate:
Nominal Slew Rate:
Maximum Input Offset Current (IIO):
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
Screening Level:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
LF412CN/NOPB Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Design/Specification - Datasheet Update 31/Oct/2014 Mold Compound Updated 10/Jul/2014
PCN Assembly/Origin - Assembly Site 17/Dec/2021
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BSS138NH6327XTSA2
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N4148WS
Sensitron Semiconductor
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
Rochester Electronics
Eic Semiconductor
Transys Electronics
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
INA117KU/2K5G4
INA117KU/2K5G4 by Texas Instruments is an Op Amp with 1000uV Max Input Offset Voltage, 75dB CMRR, and 2V/us Min Slew Rate. Ideal for industrial applications due to -40 to 85°C operating temp range, ±15V power supplies, and small outline package style.
LM358AN/NOPB
LM358AN/NOPB by Texas Instruments is a dual operational amplifier with 8 terminals. It features a max input offset voltage of 5000 uV and a nominal common mode reject ratio of 85 dB. With a unity gain bandwidth of 1000 kHz, it is commonly used in commercial applications requiring precise signal amplification.
OPA656NB/250
OPA656NB/250 by Texas Instruments is a voltage-feedback operational amplifier with a unity gain bandwidth of 500 kHz. It features a max input offset voltage of 600 uV and operates at an industrial temperature grade range from -40 to 85 °C. Ideal for applications requiring high precision and low power consumption in compact designs.
OPA4227UAG4
OPA4227UAG4 by Texas Instruments is an operational amplifier with 200uV max input offset voltage, 138dB nominal CMRR, and 15V nominal voltage. Ideal for industrial applications requiring low-offset amplification in a compact package.
OPA2314ASDRBTEP
OPA2314ASDRBTEP by Texas Instruments is a CMOS operational amplifier with low bias current (0.00001 uA) and micropower feature. With a unity gain bandwidth of 3000 kHz, it's ideal for automotive applications requiring high common mode rejection ratio (80 dB). The small outline package makes it suitable for space-constrained designs.
OPA348AIDCKTG4
OPA348AIDCKTG4 by Texas Instruments is a CMOS operational amplifier with low bias current of 0.00001 uA, ideal for automotive applications. It features a max input offset voltage of 6000 uV and nominal unity gain bandwidth of 1000 kHz, making it suitable for micropower designs requiring precise signal amplification in compact spaces. With a small outline package style and surface mount capability, this op amp offers high performance in temperature-sensitive environments while consuming only 0.065 mA of supply current.
LMC6482AIMX/NOPB
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OPA2210IDRGR
OPA2210IDRGR by Texas Instruments is an operational amplifier with a max input offset voltage of 35uV and low bias current of 0.002uA. It operates at temperatures ranging from -40 to 125 °C, making it suitable for automotive applications. With a nominal unity gain bandwidth of 18,000 kHz, this op amp offers high performance in a compact package.
LM2902MX/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
NCS20072DR2G
NCS20072DR2G by Onsemi is a dual operational amplifier with 4000uV max input offset voltage, 125dB CMRR, and 3200kHz unity gain bandwidth. Ideal for automotive applications due to its small outline package, low bias current of 0.0015uA, and wide operating temperature range from -40 to 125°C.
LM358NG
LM358NG by Onsemi is an operational amplifier with 2 functions, offering a max input offset voltage of 7000 uV and a nominal voltage of 5 V. Widely used in commercial applications, it features a min voltage gain of 15000 and operates within a temperature range of 0-70 °C.
LM324NSRE4
LM324NSRE4 by Texas Instruments is a voltage-feedback operational amplifier with 4 functions. It has a max input offset voltage of 9000 uV and a nominal voltage of 5 V. This amplifier is commonly used in applications requiring low-bias, micropower amplification with high common mode rejection ratio.
TL084IN
TL084IN by Texas Instruments is a quad operational amplifier with 4 functions. It features a max input offset voltage of 9000 uV, min slew rate of 8 V/us, and nominal common mode reject ratio of 86 dB. Widely used in industrial applications due to its low-bias characteristics and high voltage supply limits of +-15 V.
LM324D-T
NXP Semiconductors
LM324D-T by NXP Semiconductors is a quad operational amplifier with 4 functions, ideal for various applications. It features a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 70 dB. With a nominal unity gain bandwidth of 1000 kHz, it operates within a temperature range of 0-70 °C and has a max supply voltage limit of 32 V.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
OPA170AIDBVR
OPA170AIDBVR by Texas Instruments is a micropower operational amplifier with low-bias current and high common mode rejection ratio. It operates at a wide temperature range of -40 to 125°C, making it suitable for automotive applications. With a unity gain bandwidth of 1200 kHz and compact dimensions of 2.9mm x 1.6mm x 1.45mm, it is ideal for space-constrained designs requiring precision amplification.
LM324N/NOPB
LM324N/NOPB by Texas Instruments is a quad operational amplifier with 14 terminals. It features a max input offset voltage of 9000 uV, bias current of 0.5 uA, and common mode reject ratio of 85 dB. Widely used in applications requiring micropower amplification with a supply voltage range of 5-30 V.
AD8615AUJZ-R2
Analog Devices
AD8615AUJZ-R2 by Analog Devices is a CMOS Operational Amplifier with low-offset (0.8 uV) and low-bias (0.00055 uA). Ideal for automotive applications, it offers a wide temperature range (-40 to 125 °C) and high common mode rejection ratio (100 dB). With compact dimensions (2.9mm x 1.6mm x 1mm), it features voltage-feedback architecture and unity gain bandwidth of 24 kHz.
LM258DR2G
LM258DR2G by Onsemi is a dual operational amplifier with 5000uV max input offset voltage and 85dB nominal CMRR. Ideal for applications requiring low bias current, it operates at -25 to 85 °C with a supply voltage of +-1.5/+-15/3/30V. The small outline package makes it suitable for compact designs in various electronic systems.
LM2902M
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Shape: RECTANGULAR; Maximum Supply Current: 3 mA;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LF412CN/NOPB
LF412CDR
LF412CDR by Texas Instruments is an Operational Amplifier with 3000uV Max Input Offset Voltage, 100dB Nominal CMRR, and 8V/us Min Slew Rate. Ideal for precision signal processing applications due to its low-bias current, high voltage gain, and JFET technology. Suitable for commercial-grade circuits requiring precise amplification in a compact package.
LF412CDR2
LF412CDR2 by Onsemi is a dual operational amplifier with low bias current (0.004 uA) and high common mode rejection ratio (100 dB). It operates at a wide temperature range (0-70 °C) making it suitable for commercial applications requiring precise signal amplification. With a unity gain bandwidth of 4000 kHz, this Op Amp is ideal for various electronic circuits.
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LF412CDRE4
LF412CDRE4 by Texas Instruments is an Operational Amplifier with 3000uV Max Input Offset Voltage, 100dB Nominal CMRR, and 8V/us Min Slew Rate. Ideal for precision signal processing in applications requiring low bias current and high voltage gain like instrumentation amplifiers or active filters.
LF412CDRG4
LF412CDRG4 by Texas Instruments is a BIFET operational amplifier with 3000 kHz unity gain bandwidth, 15000 min voltage gain, and 100 dB common mode reject ratio. Ideal for applications requiring low-bias current amplification in commercial temperature environments. Package style is small outline with dual terminals and surface mount capability.
LF411CPE4
LF412CD
LF412CD by Texas Instruments is a dual operational amplifier with a max input offset voltage of 3000 uV and a max average bias current of 0.0002 uA. It is commonly used in applications requiring low-bias, such as audio amplification and signal conditioning.
LF411CN/NOPB
LF411CP
LF412ACN/NOPB
LF412ACN/NOPB by Texas Instruments is an Operational Amplifier with 3000uV Max Input Offset Voltage, 100dB Nominal CMRR, and 10V/us Min Slew Rate. Ideal for precision applications requiring low bias current and high voltage gain in commercial temperature range.
LF411CD
LF411CDR
LF411CDR by Texas Instruments is an operational amplifier with a max input offset voltage of 2000 uV, low bias current of 0.0002 uA, and nominal unity gain bandwidth of 3000 kHz. Ideal for applications requiring high voltage gain, frequency compensation, and low-bias operation in commercial-grade temperature environments.
LF412CN8#PBF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved