Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
J176D74Z by National Semiconductor is a P-CHANNEL FET with a max drain-source on resistance of 250 ohm. It is commonly used for switching applications due to its depletion mode and single configuration.
Median Price
$0.132
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Arrow
1+ parts
$0.301
100+ parts
$0.162
1k+ parts
$0.130
10k+ parts
$0.108
Mouser Electronics
$0.650
$0.255
$0.173
$0.145
Distrelec
$0.806
$0.751
$0.632
$0.555
Newark
-
$0.170
Verical
$0.100
Master Electronics
$0.104
Chip1Stop
$0.123
DigiKey
Flip Electronics (Authorized)
Rochester
$0.092
$0.077
$0.068
Digiode
$0.072
Nova Conductors
$0.157
TME
$0.590
$0.246
$0.155
$0.128
Forefront Electronics and Design
$9.800
NAC Semi
$0.274
Chip Stock
IBS Electronics
$0.146
Vyrian
Schukat
$0.193
$0.153
$0.127
Flip Electronics
Anansix
Velocity Electronics
Ampacity Inc.
$0.065
Corphita
Corohmni
$0.076
Component Stockers USA
Netroflash
$0.149
Continental Prestige Electronics
$0.464
$0.222
$0.113
$0.105
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
TANS Electronics
Kepictronics
Perfect Parts
Problanco Electronics
SupplyDigital Components
Glotronic Ltd.
Supply Digital
Authorized Procurement Solutions
UHIMA Technologies
GreenTree Electronics
PLASTIC/EPOXY - This material provides durability and protection, making the product suitable for various environments and ensuring long-lasting performance.
P-CHANNEL - The P-channel type allows for efficient control of the electric current, enhancing the overall performance and reliability of the transistor.
SINGLE - This single configuration simplifies the design and installation process, making it easier to incorporate the transistor into different projects.
SWITCHING - With a focus on switching applications, this transistor provides fast and efficient switching capabilities, making it ideal for applications that require rapid switching of electrical signals.
ROUND - The round package shape offers better thermal dissipation capabilities, allowing the product to operate at optimal temperatures even during high-demand tasks.
THROUGH-HOLE - The through-hole design ensures reliable electrical connections with the circuit board, minimizing potential signal loss and enhancing the performance of the transistor.
DEPLETION MODE - The depletion mode allows for effective control of the transistor, ensuring precise operation and reducing the risk of voltage spikes or signal distortions.
1 - The presence of a single element simplifies the design process, while also improving the overall reliability and performance of the transistor.
3 - The three terminals provide crucial connections for efficient signal transfer, enabling seamless integration into different circuits and systems.
CYLINDRICAL - The cylindrical package style offers a compact and space-saving design, making it suitable for applications with limited space while maintaining high performance standards.
JUNCTION - The junction technology employed in this transistor ensures excellent conductivity and low signal loss, resulting in efficient and reliable operation.
SILICON - The use of silicon as the transistor element material enhances its functionality, providing excellent thermal conductivity, stability, and high-frequency performance.
250 ohm - With a low maximum resistance, this transistor minimizes power loss, resulting in energy-efficient operation and improved overall performance.
BOTTOM - The bottom terminal position simplifies installation and connection, allowing for easier integration into different circuit layouts and configurations.
Small Signal Field Effect Transistors (FET) J176D74Z attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from National Semiconductor
Configuration:
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
J176D74Z Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
Unitrode
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
FDS9945
FDS9945 by Onsemi is a N-CHANNEL FET with 60V DS breakdown voltage and 3.5A max drain current, ideal for switching applications. It features a separate configuration with built-in diode, GULL WING terminals, and operates in enhancement mode. The small outline package style and max operating temperature of 175°C make it suitable for various electronic designs.
BS170
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Terminal Form: WIRE; Terminal Position: BOTTOM;
MMBF4393LT1G
MMBF4393LT1G by Onsemi is a N-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and operates in ENHANCEMENT MODE. With a max power dissipation of 0.225W and operating temperature up to 150°C, it offers reliable performance in various electronic circuits.
BSS138PW
NXP Semiconductors
NXP Semiconductors' BSS138PW is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features 1.6 ohm RDS(on) and operates in ENHANCEMENT MODE. This PLASTIC/EPOXY transistor has GULL WING terminals and is surface mountable.
FDS9435A
The Onsemi FDS9435A is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features 5.3A Drain Current, 0.05 ohm On Resistance, and operates in ENHANCEMENT MODE. With a max power dissipation of 2.5W and operating temperature range from -55 to 175 °C, it is suitable for various electronic designs requiring high performance in a small outline package.
BSS138NL6327
BSS138NL6327 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage, 0.23A drain current, and 3.5 ohm on-resistance. Ideal for small outline applications requiring a single transistor with built-in diode in enhancement mode operation. Suitable for use in automotive electronics due to AEC-Q101 reference standard compliance.
FDG6332C
The Onsemi FDG6332C is a Small Signal FET with N/P-Channel, 2 elements w/ diode. It operates in enhancement mode for switching applications. Features include max drain current of 0.7A, min DS breakdown voltage of 20V, and max power dissipation of 0.3W.
ZVN3306FTA
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Drain Current (ID): .15 A; Maximum Drain-Source On Resistance: 5 ohm;
2N7002LT3G
2N7002LT3G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
ZVP2106ASTOA
Diodes Incorporated
ZVP2106ASTOA by Diodes Inc. is a P-CHANNEL FET with 60V DS breakdown voltage, 0.28A ID, and 5 ohm RDS(on). Ideal for switching applications, it features SILICON transistor element, ENHANCEMENT MODE operation, and METAL-OXIDE SEMICONDUCTOR technology.
FDC604P
FDC604P by Onsemi is a P-CHANNEL small signal FET with a min DS breakdown voltage of 20V. It is used for switching applications and has a max drain current of 5.5A.
BSS138Q-7-F
BSS138Q-7-F by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage and 0.2A max drain current, ideal for switching applications. It operates in enhancement mode, has 3 terminals, and features a built-in diode. With a max power dissipation of 0.3W and operating temperature range from -55 to 150°C, it meets AEC-Q101 standards for automotive use.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LND150N3-GP003
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JESD-30 Code: O-PBCY-T3; Terminal Form: THROUGH-HOLE; Operating Mode: DEPLETION MODE;
NDC7001C
Fairchild Semiconductor
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Terminal Position: DUAL; Peak Reflow Temperature (C): 260;
NX3008NBKS,115
NXP Semiconductors' NX3008NBKS,115 is a N-CHANNEL FET for SWITCHING applications. With 30V DS Breakdown Voltage and 0.35A Drain Current, it operates in ENHANCEMENT MODE. Featuring GULL WING terminals and METAL-OXIDE SEMICONDUCTOR tech, it's ideal for small outline packages in automotive electronics.
IRFL9110TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.1 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
MMBF170
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Terminal Form: GULL WING; Terminal Position: DUAL;
2N7000
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; JEDEC-95 Code: TO-92; Terminal Form: THROUGH-HOLE;
FDV304P-F169
Onsemi's FDV304P-F169 is a P-CHANNEL FET for switching applications. It features a 25V DS breakdown voltage, 0.46A max drain current, and 1.1 ohm max on resistance. With a small outline package style and GULL WING terminals, it operates in enhancement mode at -55 to 150 °C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
J176_D74Z
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; No. of Elements: 1;
J176
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Minimum DS Breakdown Voltage: 30 V; Package Shape: ROUND; Maximum Operating Temperature: 150 Cel;
J176,126
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Package Shape: ROUND; Minimum DS Breakdown Voltage: 30 V;
J176-AMMO
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Minimum DS Breakdown Voltage: 30 V; Package Style (Meter): CYLINDRICAL;
J176AMO
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Terminal Form: THROUGH-HOLE; JESD-30 Code: O-PBCY-T3;
J176-T/R
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; Terminal Form: WIRE; Package Style (Meter): CYLINDRICAL;
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN SILVER COPPER; No. of Elements: 1;
J176/D10Z(OPTION18)
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; JEDEC-95 Code: TO-92; JESD-30 Code: O-PBCY-T3; Terminal Form: THROUGH-HOLE;
J176/D10Z(OPTION5)
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Feedback Capacitance (Crss): 5.5 pF; JESD-30 Code: O-PBCY-T3; No. of Elements: 1;
J176/D29Z(OPTION18)
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; JESD-30 Code: O-PBCY-T3; Operating Mode: DEPLETION MODE;
J176/D74Z(OPTION18)
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; No. of Elements: 1; Terminal Form: THROUGH-HOLE; Transistor Application: SWITCHING;
J176/D74Z(OPTION5)
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Package Style (Meter): CYLINDRICAL; Field Effect Transistor Technology: JUNCTION; Operating Mode: DEPLETION MODE;
J176/D75Z(OPTION18)
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; No. of Elements: 1; Transistor Element Material: SILICON; JESD-30 Code: O-PBCY-T3;
J176/D75Z(OPTION5)
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL; Transistor Application: SWITCHING;
J176/D81Z(OPTION18)
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Operating Mode: DEPLETION MODE; JESD-30 Code: O-PBCY-T3; No. of Terminals: 3;
J176/D81Z
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Position: BOTTOM; No. of Elements: 1; JEDEC-95 Code: TO-92;
J176/D89Z(OPTION18)
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; JEDEC-95 Code: TO-92; Qualification: Not Qualified; Terminal Position: BOTTOM;
J176D26Z
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Package Shape: ROUND; Qualification: Not Qualified;
J176D75Z
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Transistor Application: SWITCHING; JEDEC-95 Code: TO-92; Package Body Material: PLASTIC/EPOXY;
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY; Terminal Position: BOTTOM;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved